TEL TE208, TE206, TE204, TE202, TE2010 Datasheet
...
TE200 THRU TE2010
GLASS PASSIVATED JUNCTION PLASTIC RECTIFIER
VOLTAGE - 50 to 1000 Volts CURRENT - 2.0 Amperes
FEATURES
l Plastic package has Underwriters Laboratory
Flammability Classification 94V-O utilizing
Flame Retardant Epoxy Molding Compound
l 2.0 ampere operation at TA=55 with no thermal runaway
l Exceeds environmental standards of MIL-S-19500/228
l Glass passivated junction in DO-15 package
MECHANICAL DATA
Case: Molded plastic , DO-15
Terminals: Axial leads, solderable per MIL-STD-202,
Method 208
Polarity: Color band denotes cathode
Mounting Position: Any
Weight: 0.015 ounce, 0.4 gram
DO-15
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Maximum Recurrent Peak Reverse Voltage 50 100 200 400 600 800 1000 V
Maximum RMS Voltage 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage 50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified
Current .375"(9.5mm) Lead Length at
TA=55
Peak Forward Surge Current 8.3ms single
half sine-wave superimposed on rated load
(JEDEC method)
Maximum Forward Voltage at 2.0A 1.1 V
Maximum Reverse Current Ta=25
at Rated DC Blocking Voltage Ta=100
Typical Junction capacitance (Note 1) 25
Typical Thermal Resistance (Note 2) RJA 25 /W
Operating and Storage Temperature Range
TA
TE200 TE201 TE202 TE204 TE206 TE208 TE2010
2.0 A
70 A
5.0
50
-55 TO +150
UNITS
A
A
F
P
NOTES:
1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC.
2. Thermal Resistance from Junction to Ambient and from junction to lead at 0.375"(9.5mm) lead length P.C.B
mounted.
RATING AND CHARACTERISTIC CURVES
TE200 THRU TE2010
Fig. 1-TYPICAL FORWARD CHARACTERISTICS Fig. 2-PEAK FORWARD SURGE CURRENT
Fig. 3-FORWARD CURRENT DERATING CURVE Fig. 4-TYPICAL JUNCTION CAPACITANCE
Loading...