TEL TE208R, TE206R, TE204R, TE202R, TE201R Datasheet
...
TE200R THRU TE208R
GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER
VOLTAGE - 50 to 800 Volts CURRENT - 2.0 Amperes
FEATURES
l Plastic package has Underwriters Laboratory
Flammability Classification 94V-O Utilizing
Flame Retardant Epoxy Molding Compound
l Glass passivated junction in DO-15 package
l 2.0 ampere operation at TA=55 with no thermal runaway
l Exceeds environmental standards of MIL-S-19500/228
l Fast switching for high efficiency
MECHANICAL DATA
Case: Molded plastic, DO-15
Terminals: axial leads, solderable per MIL-STD-202,
Method 208
Polarity: Band denotes cathode
Mounting Position: Any
Weight: 0.015 ounce, 0.4 gram
DO-15
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
Peak Reverse Voltage, Repetitive; VRM 50 100 200 400 600 800 V
Maximum RMS Voltage 35 70 140 280 420 560 V
DC Reverse Voltage; VR 50 100 200 400 600 800 V
Average Forward Current, IO @ TA=553.8”lead
length 60 Hz, resistive or inductive load
Peak Forward Surge Current, IFM (surge) 8.3msec.
single half sine wave superimposed on rated
load(JECEC method)
Maximum Forward Voltage VF @2.0A, 25 1.3 V
Maximum Reverse Current, @Rated Ta=25
Reverse Voltage Ta=100
Typical Junction capacitance (Note 1) CJ 35
Typical Thermal Resistance (Note 2) RJA 22 /W
Reverse Recovery Time
IF=.5A, IR=1A, Irr=.25A
Operating and Storage Temperature Range -55 to +150
NOTES:
1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC
TE200R TE201R TE202R TE204R TE206R TE208R
2.0 A
70 A
5.0
2000
150 150 150 150 250 500 ns
UNITS
A
F
P
2. Thermal resistance from junction to ambient at 0.375"(9.5mm) lead length P.C.B. mounted
RATING AND CHARACTERISTIC CURVES
TE200R THRU TE208R
Fig. 1-REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM
Fig. 2- FORWARD CHARACTERISTICS Fig. 3-FORWARD CURRENT DERATING CURVE
Fig. 4-TYPICAL JUNCTION CAPACITANCE Fig. 5-PEAK FORWARD SURGE CURRENT
Loading...