TEL TE151R, TE150R, TE156R, TE154R, TE152R Datasheet

...

TE150R THRU TE158R

GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER

VOLTAGE - 50 to 800 Volts CURRENT - 1.5 Amperes

FEATURES

l Plastic package has Underwriters Laboratory

Flammability Classification 94V-O Utilizing Flame Retardant Epoxy Molding Compound

l 1.5 ampere operation at TA=55 with no thermal runaway l Exceeds environmental standards of MIL-S-19500/228 l Fast switching for high efficiency l Glass passivated junction in DO-15 package

MECHANICAL DATA

Case: Molded plastic, DO-15 Terminals: axial leads, solderable per MIL-STD-202, Method 208 Polarity: denotes cathode Mounting Position: Any Weight: 0.015 ounce, 0.4 gram

DO-15

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25 ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load.

Peak Reverse Voltage, Repetitive; VRM 50 100 200 400 600 800 V Maximum RMS Voltage 35 70 140 280 420 560 V DC Reverse Voltage; VR 50 100 200 400 600 800 V Average Forward Current, IO @ TA=553.8”lead length 60 Hz, resistive or inductive load Peak Forward Surge Current, IFM (surge) 8.3msec. single half sine wave superimposed on rated load(JECEC method) Maximum Forward Voltage VF @1.5A, 25 1.3 V Maximum Reverse Current, @Rated Ta=25 Reverse Voltage Ta=100

Typical Junction capacitance (Note 1) CJ 25 Typical Thermal Resistance (Note 2) RJA 45 /W Reverse Recovery Time IF=.5A, IR=1A, Irr=.25A Operating and Storage Temperature Range -55 to +150

NOTES:

1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC

TE150R TE151R TE152R TE154R TE156R TE158R

1.5 A 50 A

5.0

150

150 150 150 150 250 500 ns

UNITS

A



2. Thermal resistance from junction to ambient at 0.375"(9.5mm) lead length P.C.B. mounted

RATING AND CHARACTERISTIC CURVES TE150R THRU TE158R

Fig. 1-REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM

Fig. 2- FORWARD CHARACTERISTICS Fig. 3-FORWARD CURRENT DERATING CURVE

Fig. 4-TYPICAL JUNCTION CAPACITANCE Fig. 5-PEAK FORWARD SURGE CURRENT vs. REVERSE VOLTAGE