TEL P4KE100CA, P4KE10CA, P4KE11, P4KE110, P4KE110A Datasheet

P4KE SERIES

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE - 6.8 TO 440 Volts 400 Watt Peak Power 1.0 Watt Steady State

FEATURES

l Plastic package has Underwriters Laboratory
Flammability Classification 94V-O

l Glass passivated chip junction in DO-41 package
l 400W surge capability at 1ms
l Excellent clamping capability
l Low zener impedance
l Fast response time: typically less

than 1.0 ps from 0 volts to BV min

l Typical IR less than 1A above 10V
l High temperature soldering guaranteed:

300/10 seconds/.375”,(9.5mm) lead
length/5lbs., (2.3kg) tension

MECHANICAL DATA

Case: JEDEC DO-41 molded plastic

DO-41

Terminals: Axial leads, solderable per
MIL-STD-202, Method 208
Polarity: Color band denoted cathode
except Bipolar
Mounting Position: Any
Weight: 0.012 ounce, 0.34 gram

DEVICES FOR BIPOLAR APPLICATIONS

For Bidirectional use C or CA Suffix for types

Electrical characteristics apply in both directions.

MAXIMUM RATINGS AND CHARACTERISTICS

Ratings at 25ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.

RATING SYMBOL VALUE UNITS
Peak Power Dissipation at TA=25, TP=1ms(Note 1) PPK Minimum 400 Watts
Steady State Power Dissipation at TL=75Lead Lengths
.375”,(9.5mm) (Note 2)
Peak Forward Surge Current, 8.3ms Single Half Sine-Wave
Superimposed on Rated Load(JECED Method) (Note 3)
Operating and Storage Temperature Range TJ,T

PD 1.0 Watts

I

40.0 Amps

FSM

-65 to+175

STG



NOTES:

1.Non-repetitive current pulse, per Fig. 3 and derated above TA=25per Fig. 2.

2.Mounted on Copper Leaf area of 1.57in2(40mm2).

3.8.3ms single half sine-wave, duty cycle= 4 pulses per minutes maximum.
RATING AND CHARACTERISTIC CURVES P4KE SERIES

Fig. 1-PEAK PULSE POWER RATING VERSUS Fig. 2-PULSE DERATING CURVE
PULSE TIME CURVE

Fig. 3-PULSE WAVEFORM Fig. 4-TYPICAL JUNCTION CAPACITANCE
UNIDIRECTIONAL