TEL GS1G, GS1K, GS1K, GS1M, GS1M Datasheet
...
GS1A THRU GS1M
SURFACE MOUNT RECTIFIER
VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere
FEATURES
l For surface mounted applications
l Low profile package
l Built-in strain relief
l Easy pick and place
l Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
l Glass passivated chip junction
l High temperature soldering:
260/10 seconds at terminals
MECHANICAL DATA
Case: JEDEC DO-214AC molded plastic
Terminals: Solder plated, solderable per MIL-STD-750,
Method 2026
Polarity: Indicated by cathode band
Standard packaging: 12mm tape (EIA-481)
SMA/DO-214AC
Weight: 0.002 ounce, 0.064 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Maximum Recurrent Peak Reverse Voltage V
Maximum RMS Voltage V
Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000
Maximum Average Forward Rectified Current,
at TL=100
Peak Forward Surge Current 8.3ms single half sinewave superimposed on rated load(JEDEC method)
Maximum Instantaneous Forward Voltage at 1.0A VF 1.10 Volts
Maximum DC Reverse Current TA=25
At Rated DC Blocking Voltage TA=125
SYMBOLS GS1A GS1B GS1D GS1G GS1J GS1K GS1M UNITS
50 100 200 400 600 800 1000
RRM
35 70 140 280 420 560 700
RMS
I
1.0 Amps
(AV)
I
30.0 Amps
FSM
IR 5.0
50
Volts
Volts
Volts
A
Maximum Reverse Recovery Time (Note 1) TRR 2.5 S
Typical Junction capacitance (Note 2) CJ 12
F
P
Typical Thermal Resistance (Note 3) RJL 30.0 /W
Operating and Storage Temperature Range TJ,T
-55 to +150
STG
NOTES:
1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, Irr=0.25A
2. Measured at 1.0 MHz and Applied Vr=4.0 volts
3. 8.0mm2 (.013mm thick) land areas
RATING AND CHARACTERISTIC CURVES
GS1A THRU GS1M
Fig. 1-FORWARD CURRENT DERATING CURVE Fig. 2-MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
Fig. 3-TYPICAL REVERSE CHARACTERISTICS Fig. 4-TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS
Fig. 5-TRANSIENT THERMAL IMPEDANCE Fig. 6-TYPICAL JUNCTION CAPACITANCE
Loading...