TEL FR2A, FR2J, FR2J, FR2K, FR2K Datasheet
...
FR2A THRU FR2K
SURFACE MOUNT ULTRAFAST RECTIFIER
VOLTAGE - 50 to 800 Volts CURRENT - 2.0 Amperes
FEATURES
l For surface mounted applications
l Low profile package
l Built-in strain relief
l Easy pick and place
l Fast recovery times for high efficiency
l Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
l Glass passivated junction
l High temperature soldering:
260/10 seconds at terminals
MECHANICAL DATA
Case: JEDEC DO-214AA molded plastic
Terminals: Solder plated, solderable per MIL-STD-750,
Method 2026
Polarity: Indicated by cathode band
SMB/DO-214AA
Standard packaging: 12mm tape (EIA-481)
Weight: 0.003 ounce, 0.093 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified.
Resistive or inductive load.
For capacitive load, derate current by 20%.
Maximum Recurrent Peak Reverse Voltage V
Maximum RMS Voltage V
Maximum DC Blocking Voltage VDC 50 100 200 400 600 800
Maximum Average Forward Rectified Current,
at TL=90
Peak Forward Surge Current 8.3ms single half sinewave superimposed on rated load(JEDEC method)
Maximum Instantaneous Forward Voltage at 2.0A VF 1.30 Volts
Maximum DC Reverse Current TA=25
At Rated DC Blocking Voltage TA=125
Maximum Reverse Recovery Time (Note 1) TJ=25
Typical Junction capacitance (Note 2) CJ 40
Maximum Thermal Resistance (Note 3) RJL 20.0 /W
Operating and Storage Temperature Range TJ,T
SYMBOLS FR2A FR2B FR2D FR2G FR2J FR2K UNITS
50 100 200 400 600 800
RRM
35 70 140 280 420 560
RMS
I
2.0 Amps
(AV)
I
50.0 Amps
FSM
IR 5.0
200
Volts
Volts
Volts
A
TRR 150 250 500 nS
F
P
-50 to +150
STG
NOTES:
1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, Irr=0.25A
2. Measured at 1 MHz and Applied reverse voltage of 4.0 volts
3. 8.0mm2 (.013mm thick) land areas
RATING AND CHARACTERISTIC CURVES
FR2A THRU FR2K
Fig. 1-FORWARD CURRENT DERATING CURVE Fig. 2-MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
Fig. 3-TYPICAL INSTANTANEOUS FORWARD Fig. 4-TYPICAL REVERSE CHARACTERISTICS
CHARACTERISTICS
Loading...