TEL FL408, FL408, FL406, FL406, FL404 Datasheet

...

FL400 THRU FL408

Maximum Average Rectified Output Current

IN-LINE MINIATURE SINGLE PHASE SILICON BRIDGE

VOLTAGE - 50 to 800 Volts CURRENT - 4.0 Amperes

FEATURES

l Surge overload rating: 200 Amperes peak l Ideal for printed circuit board l Plastic package has Underwriter Laboratory

Flammability Classification 94V-O l Reliable low cost construction utilizing molded plastic technique

MECHANICAL DATA

Terminals: Lead solderable per MIL-STD-202, Method 208 Mounting position: Any Weight: 0.2 ounce, 5.6 grams

Maximum Recurrent Peak Reverse Voltage Maximum RMS Bridge Input Voltage 35 70 140 280 420 560 V Maximum DC Blocking Voltage 50 100 200 400 600 800 V

at 50Ambient Peak One Cycle Surge Overload Current 200 A Maximum Forward Voltage Drop per Bridge Element at 4.0A DC Max (Total Bridge) Reverse Leadage at Rated DC Blocking Voltage Max (Total Bridge) Reverse Leadage at Rated DC Blocking Voltage and 100 I2t Rating for fusing ( t<8.3ms) 93.0 A2Sec

Typical Thermal Resistance per leg(Note 2) RJA (Note 3) RJL

Operating Temperature Range -55 TO +125 Storage Temperature Range -55 TO +150

FL400 FL401 FL402 FL404 FL406 FL408 UNITS

50 100 200 400 600 800 V

4.0 A

1.1 V

10.0

A

1.0 mA

19.0

/W

2.4

 

NOTES:

1. Thermal resistance from junction to ambient with units mounted on 3.0×3.0×0.11” thick (7.5×7.5×0.3cm) AL Plate.

2. Thermal resistance from junction to lead with units mounted on P.C.B at 0.375”(9.5mm) lead length and 0.5×0.5” (12×12mm) copper pads.

RATING AND CHARACTERISTIC CURVES FL400 THRU FL408

Fig. 1-MAXIMUM OVERLOAD SURGE CURRENT Fig. 2-TYPICAL FORWARD CHARACTERISTICS

Fig. 3-REVERSE CHARACTERISTICS Fig. 4- NON-RECURRENT SURGE RATING