TEL ER1G, ER1E, ER1E, ER1C, ER1C Datasheet

ER1A THRU ER1J

SURFACE MOUNT SUPERFAST RECTIFIER

VOLTAGE - 50 to 600 Volts CURRENT - 1.0 Ampere

FEATURES

l For surface mounted applications
l Low profile package
l Built-in strain relief
l Easy pick and place
l Superfast recovery times for high efficiency
l Plastic package has Underwriters Laboratory

Flammability Classification 94V-O

l Glass passivated junction
l High temperature soldering:

260/10 seconds at terminals

MECHANICAL DATA

Case: JEDEC DO-214AA molded plastic
Terminals: Solder plated, solderable per MIL-STD-750,
Method 2026
Polarity: Indicated by cathode band

SMB/DO-214AA

Standard packaging: 12mm tape (EIA-481)
Weight: 0.003 ounce, 0.093 gram

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25 ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.

Maximum Recurrent Peak Reverse Voltage V
Maximum RMS Voltage V
Maximum DC Blocking Voltage VDC
Maximum Average Forward Rectified Current,
at TL=100
Peak Forward Surge Current 8.3ms single half sine­wave superimposed on rated load(JEDEC method)
Maximum Instantaneous Forward Voltage at 1.0A VF 0.95 1.25 1.7 Volts
Maximum DC Reverse Current TA=25
At Rated DC Blocking Voltage TA=100

SYMBOLS ER1A ER1B ER1C ER1D ER1E ER1G ER1J UNITS

50 100 150 200 300 400 600 Volts

RRM
RMS

I

(AV)

I

FSM

IR 5.0

35 70 105 140 210 280 420 Volts
50 100 150 200 300 400 600 Volts

1.0 Amps

30.0 Amps

A

100
Maximum Reverse Recovery Time (Note 1) TRR 35.0 nS
Typical Junction capacitance (Note 2) CJ 10.0

F

P

Typical Thermal Resistance (Note 3) RJL 34 /W
Operating and Storage Temperature Range TJ,T

-50 to +150

STG



NOTES:

1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, Irr=0.25A

2. Measured at 1 MHz and Applied reverse voltage of 4.0 volts

3. 8.0mm2 (.013mm thick) land areas
RATING AND CHARACTERISTIC CURVES
ER1A THRU ER1J

Fig. 1-REVERSE RECOVERY TIME CHARACTERISTIC Fig. 2-MAXIMUM AVERAGE FORWARD
AND TEST CIRCUIT DIAGRAM ER1A THRU ER1J CURRENT RATING

Fig. 3-TYPICAL REVERSE CHARACTERISTICS Fig. 4-TYPICAL FORWARD CHARACTERISTICS