TEL DI158, DI158, DI156, DI156, DI154 Datasheet

...

DI100/150 THRU DI1010/1510

DUAL-IN-LINE GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER

VOLTAGE - 50 to 1000 Volts CURRENT - 1.0~1.5 Amperes

FEATURES

l Plastic material used carries Underwriters Laboratory recognition 94V-O

l Low leakage l Surge overload rating— 30~50 amperes peak l Ideal for printed circuit board l Exceeds environmental standards of

MIL-S-19500/228

MECHANICAL DATA

Case: Reliable low cost construction utilizing molded plastic technique results in inexpensive product Terminals: Lead solderable per MIL-STD-202, Method 208 Polarity: Polarity symbols molded or marking on body Mounting Position: Any

DIP

Weight: 0.02 ounce, 0.4 gram

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25 ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, Resistive or inductive load. For capacitive load, derate current by 20%.

Maximum Recurrent Peak Reverse Voltage 50 100 200 400 600 800 1000 Maximum RMS Bridge input Voltage 35 70 140 280 420 560 700

DI100 DI150

DI101 DI151

DI102 DI152

DI104 DI154

DI106 DI156

DI108 DI158

DI1010 DI1510

Maximum DC Blocking Voltage 50 100 200 400 600 800 1000

DI100

TA=40

Peak Forward Surge Current, 8.3ms single half sine-wave superimposed on rated load

I2t Rating for fusing ( t < 8.35 ms) 10.0 A2t Maximum Forward Voltage Drop per Bridge

DI150 DI100 DI150

1.0 Maximum Average Forward Current

1.5

30.0

50.0

1.1 V

Element at 1.0A

Maximum Reverse Current at Rated TJ= 25 DC Blocking Voltage per element TJ=125

Typical Junction capacitance per leg (Note 1) CJ Typical Thermal resistance per leg (Note 2) RJA

Typical Thermal resistance per leg (Note 2) RJL Operating Temperature Range T Storage Temperature Range T

5.0

0.5

25.0

40.0

15.0

-55 to +125

-55 to +150

UNITS

V V V A

A

/W

 

NOTES:

1. Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts

2. Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B. with

0.5×0.5”(13×13mm) copper pads RATING AND CHARACTERISTIC CURVES DI100/150 THRU DI1010/1510

Fig. 1-MAXIMUM NON-REPETITIVE SURGE CURRENT Fig. 2-DERATING CURVE FOR OUTPUT RECTIFIED CURRENT

Fig. 3-TYPICAL FORWARD CHARACTERISTICS Fig. 4-TYPICAL REVERSE CHARACTERISTICS