AM100/150 THRU AM1010/1510
1.0 TO 1.5 AMPERE SILICON MINIATURE SINGLE-PHASE BRIDGE
VOLTAGE - 50 to 1000 Volts CURRENT - 1.0~1.5 Amperes
FEATURES
l Ratings to 1000V PRV
l Surge overload rating— 30/50 amperes peak
l Ideal for printed circuit board
l Reliable construction utilizing molded plastic
l Mounting position: Any
MECHANICAL DATA
Case: Reliable low cost construction utilizing molded
plastic technique results in inexpensive product
Terminals: Lead solderable per MIL-STD-202,
Method 208
Polarity: Polarity symbols marking on body
Weight: 0.05 ounce, 1.3 grams
AM
Available with 0.50 inch leads (P/N add suffix “S”)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, Resistive or inductive load.
For capacitive load, derate current by 20%.
Maximum Recurrent Peak Reverse Voltage 50 100 200 400 600 800 1000
Maximum RMS Bridge input Voltage 35 70 140 280 420 560 700
AM100
AM150
AM101
AM151
AM102
AM152
AM104
AM154
AM106
AM156
AM108
AM158
Maximum DC Blocking Voltage 50 100 200 400 600 800 1000
Current at TA=50
Peak Forward Surge Current, 8.3ms single
half sine-wave superimposed on rated load
Maximum Forward Voltage Drop per Bridge
Element at 1.0A DC
Maximum Reverse Current at Rated TA= 25
DC Blocking Voltage per element TA=100
I2t Rating for fusing ( t< 8.35ms)
Typical Junction capacitance per leg (Note 1) CJ
Typical Thermal resistance per leg (Note 2) RJA
Typical Thermal resistance per leg (Note 2) RJL
Operating Temperature Range T
Storage Temperature Range T
J
A
AM100
AM150
AM100
AM150
1.0 Maximum Average Forward Rectified
1.5
30.0
50.0
1.0 V
10.0
1.0
10
24
36
13
-55 to +125
-55 to +150
AM1010
AM1510
UNITS
V
V
V
A
A
A
mA
A2S
F
P
/W
1. Measured at 1 MHz and applied reverse voltage of 4.0 Volts
2. Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B. with
0.47×0.47”(12×12mm) copper pads
RATING AND CHARACTERISTIC CURVES
AM100/150 THRU AM1010/1510
Fig. 1-MAXIMUM NON-REPETITIVE SURGE CURRENT Fig. 2-DERATING CURVE FOR OUTPUT RECTIFIED
CURRENT
Fig. 3-TYPICAL FORWARD CHARACTERISTICS Fig. 4-TYPICAL REVERSE CHARACTERISTICS