TEL 1N5399, 1N5399, 1N5398, 1N5398, 1N5397 Datasheet

FEATURES

1N5391 THRU 1N5399

PLASTIC SILICON RECTIFIER

VOLTAGE - 50 to 1000 Volts CURRENT - 1.5 Amperes

l Low cost
l High current capability
l High reliability
l Plastic package has Underwriters Laboratory

Flammability Classification 94V-O utilizing
Flame Retardant Epoxy Molding Compound

l 1.5 ampere operation at TL=70 with no thermal runaway
l Exceeds environmental standards of MIL-S-19500/228
l Low leakage

MECHANICAL DATA

Case: Molded plastic , DO-15
Terminals: Plated axial leads, solderable per MIL-STD-202,
Method 208
Polarity: Color band denotes cathode
Mounting Position: Any
Weight: 0.015 ounce, 0.4 gram

DO-15

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25 ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.

Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified

1N5391 1N5392 1N5393 1N5394 1N5395 1N5396 1N5397 1N5398 1N5399

50 100 200 300 400 500 600 800 1000
35 70 140 210 280 350 420 560 700
50 100 200 300 400 500 600 800 1000

1.5 A
Current .375"(9.5mm) Lead Length at
TA=60
Peak Forward Surge Current 8.3ms single

50 A
half sine-wave superimposed on rated load
(JEDEC method)
Maximum Forward Voltage at 1.5A 1.4 V
Maximum Reverse Current Rated TA=25
DC Blocking Voltage TA=100

5.0

500
Typical Junction capacitance (Note 1) 25
Typical Thermal Resistance (Note 2) 26.0 /W
Operating and Storage Temperature Range
TJ,T

STG

-55 TO +150

UNITS

V
V
V

A
A

F

P



NOTES:

1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC.

2. Thermal Resistance Junction to Ambient and from junction to lead at 0.375"(9.5mm) lead length P.C.Board
mounted.

RATING AND CHARACTERISTIC CURVES
1N5391 THRU 1N5399

Fig. 1-TYPICAL FORWARD CHARACTERISTICS Fig. 2-PEAK FORWARD SURGE CURRENT

Fig. 3-FORWARD CURRENT DERATING CURVE Fig. 4-TYPICAL JUNCTION CAPACITANCE