TEL 1N4007, 1N4007, 1N4006, 1N4006, 1N4005 Datasheet

FEATURES

1N4001 THRU 1N4007

PLASTIC SILICON RECTIFIER

VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere

l Low forward voltage drop
l High current capability
l High reliability
l High surge current capability
l Exceeds environmental standards of MIL-S-19500/228

MECHANICAL DATA

Case: Molded plastic , DO-41
Epoxy: UL 94V-O rate flame retardant
Lead: Axial leads, solderable per MIL-STD-202,
method 208 guaranteed
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.012 ounce, 0.3 gram

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

DO-41

Ratings at 25 ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.

Maximum Recurrent Peak Reverse Voltage 50 100 200 400 600 800 1000 V
Maximum RMS Voltage 35 75 140 280 420 560 700 V

1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 UNITS

Maximum DC Blocking Voltage 50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified

1.0 A
Current .375"(9.5mm) Lead Length at
TA=75
Peak Forward Surge Current 8.3ms single

30 A
half sine-wave superimposed on rated load
(JEDEC method)
Maximum Forward Voltage at 1.0A DC and
25
Maximum Full Load Reverse Current Full

1.1 V
30 A

Cycle Average at 75 Ambient
Maximum Reverse Current at TA=25
At Rated DC Blocking Voltage TA=100

5.0

500
Typical Junction capacitance (Note 1) 15
Typical Thermal Resistance (Note 2) RJA 50 /W
Typical Thermal resistance (NOTE 2) RJL
Operating and Storage Temperature Range
TJ,T

STG

25 /W

-55 to +150

A
A

F

P



NOTES:

1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC.

2. Thermal Resistance Junction to Ambient and from junction to lead at 0.375"(9.5mm) lead length P.C.B mounted.

RATING AND CHARACTERISTIC CURVES
1N4001 THRU 1N4007

Fig. 1-TYPICAL FORWARD CURRENT DERATING CURVE

Fig. 2-TYPICAL FORWARD CHARACTERISTICS Fig. 3-MAXIMUM NON-REPETITIVE FORWARD
SURGE CURRENT