TEL 1N4007S, 1N4007S, 1N4006S, 1N4006S, 1N4005S Datasheet

...

1N4001S THRU 1N4007S

PLASTIC SILICON RECTIFIER

VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere

FEATURES

l Low forward voltage drop l High current capability l High reliability l High surge current capability l 0.6mm leads l Exceeds environmental standards of MIL-S-19500/228

MECHANICAL DATA

Case: Molded plastic , A-405 Epoxy: UL 94V-O rate flame retardant Lead: Axial leads, solderable per MIL-STD-202, method 208 guaranteed Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.008 ounce, 0.22 gram

A-405

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25 ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%.

Maximum Recurrent Peak Reverse Voltage 50 100 200 400 600 800 1000 V Maximum RMS Voltage 35 75 140 280 420 560 700 V

1N4001S 1N4002S 1N4003S 1N4004S 1N4005S 1N4006S 1N4007S

UNITS

Maximum DC Blocking Voltage 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified

1.0 A Current @TA=75 Peak Forward Surge Current 8.3ms single half sine-wave I

superimposed on rated

FSM

30 A

load Maximum Forward Voltage at 1.0A DC 1.1 V Maximum DC Reverse Current @TA=25 At Rated DC Blocking Voltage @TA=100

5.0

500 Typical Junction capacitance (Note 1) 15 Typical Thermal Resistance (Note 2) RJA 50 /W Typical Thermal resistance (NOTE 2) RJL Operating Temperature Range TJ -55 to +150 Storage Temperature Range TA -55 to +150

25 /W

A A

 

NOTES:

1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC

2. Thermal resistance Junction to Ambient and from junction to lead at 0.375"(9.5mm) lead length P.C.B mounted

RATING AND CHARACTERISTIC CURVES 1N4001S THRU 1N4007S

Fig. 1-TYPICAL FORWARD CURRENT DERATING CURVE

Fig. 2-TYPICAL FORWARD CHARACTERISTICS Fig. 3-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT

+ 1 hidden pages