Tekvox TEK MV71-4K 79065, TEK MV71-4K 79064 User Manual
1 / 49
4K 7x1 Multiviewer Switcher
(TEK MV71-4K 79064 & 79065)
User Manual
All Rights Reserved
Revised July 1, 2015
2 / 49
Preface
Read this user manual carefully before using this product. Pictures shown in this
manual are for reference only. Different model and specifications are subject to real
product.
This manual is only for operation instruction only, not for any maintenance usage. The
functions described in this version are recent as of January 2015. Any changes to
functions and parameters since then will be updated separately. Please refer to your
dealer for the latest details.
Trademarks
Product model and logo are trademarks. Any other trademarks mentioned in this
manual are acknowledged as the properties of the trademark owner. No part of this
publication may be copied or reproduced without prior written consent.
FCC Statement
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. It has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a
commercial installation.
Operation of this equipment in a residential area is likely to cause interference, in
which case the user at their own expense will be required to take whatever measures
may be necessary to correct the interference.
Any changes or modifications not expressly approved by the manufacture will void the
user’s authority to operate the equipment.
3 / 49
SAFETY PRECAUTIONS
To insure the best from the product, please read all instructions carefully before using
the device. Save this manual for further reference.
l Unpack the equipment carefully and save the original box and packing material for
possible future shipment
l Follow basic safety precautions to reduce the risk of fire, electrical shock and injury
to persons.
l Do not dismantle the housing or modify the module. It may result in electrical shock
or burn.
l Using supplies or parts not meeting the products’ specifications may cause
damage, deterioration or malfunction.
l Refer all servicing to qualified service personnel.
l To prevent fire or shock hazard, do not expose the unit to rain, moisture or install
this product near water.
l Do not put any heavy items on the extension cable in case of extrusion.
l Do not remove the housing of the device as opening or removing housing may
expose you to dangerous voltage or other hazards.
l Install the device in a place with fine ventilation to avoid damage caused by
overheat.
l Keep the module away from liquids.
l Spillage into the housing may result in fire, electrical shock, or equipment damage.
If an object or liquid falls or spills on to the housing, unplug the module
immediately.
l Do not twist or pull by force ends of the optical cable. It can cause malfunction.
l Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to
the device before cleaning.
l Unplug the power cord when left unused for a long period of time.
l Information on disposal for scrapped devices: do not burn or mix with general
household waste, please treat them as normal electrical wastes.
4 / 49
Feature List
l Multiple inputs: 4 x HDMI, 2 x DisplayPort, 1 x RGB/YPbPr
l HDMI，DisplayPort source input with 4Kx2K@30Hz support
l Supports MHL in the four HDMI input ports
l Supports multiple HDMI output resolutions, such as 4Kx2K@30Hz and 1080P.
l Supports Auto Scaler in each source input
l Supports different multiple-window modes of quadruple windows, triple windows,
double windows and a single window, outputting to a display device through one
HDMI output
l Supports pre-defined multiple-window mode
l Supports breakaway audio
l HDCP compliant
l Fast switch between input ports
l Supports audio 7 x 1
l Supports multiple-channel HDMI, DisplayPort audio extraction, optical fiber and
eight-channel analog outputs
l Supports one-key fast switch and all-round display through HDMI/DisplayPort
Cable Switch
l Easy-to-use panel and Web GUI
l Chooses from four control methods – Panel, IR, IP (Web GUI, Telnet & UDP) and
RS232
l On-site firmware upgrading through USB port.
l 1U size design
5 / 49
Contents
Getting'Started'.......................................................................................................................................................'7'
Panel'Layout'........................................................................................................................................................'7'
Front'Panel'......................................................................................................................................................'7'
Back'Panel'.......................................................................................................................................................'8'
IR'Remote'Control'U nit'.......................................................................................................................................'9'
Button'layout'..................................................................................................................................................'9'
HDMI/DP'Cable'Switcher'(Optional)'................................................................ .................................................'10'
Installation'........................................................................................................................................................'10'
How'to'Connect'the'Multiviewer'Switcher'...................................................................................................'10'
Wiring'Diagram'.............................................................................................................................................'11'
Operating'..............................................................................................................................................................'12'
Standby'Mode'and'Operational'Mode'.............................................................................................................'12'
Screen'layout'Configuration'.............................................................................................................................'12'
Single'Window'..............................................................................................................................................'15'
Double'Windows'...........................................................................................................................................'16'
Triple'Windows'.............................................................................................................................................'17'
Quadruple'Windows'.....................................................................................................................................'18'
Output'Resolution'.............................................................................................................................................'19'
Audio'Setting'.....................................................................................................................................................'19'
Audio'Input'Select'.........................................................................................................................................'19'
Audio'Output'Instructions'............................................................................................................................'21'
OSD'Setting'Instructions'...................................................................................................................................'21'
Advanced'Settings'.................................................................................................................................................'25'
RS232'Setting'....................................................................................................................................................'25'
IP'Setting'...........................................................................................................................................................'26'
Command'List'...................................................................................................................................................'28'
Source'Control'..............................................................................................................................................'29'
Video Input Select by Viewer ...................................................................................................... 29'
Audio Source Selection .............................................................................................................. 30'
Volume Control ........................................................................................................................... 31'
6 / 49
Aspect Ratio Selection ............................................................................................................... 31'
Resolution Selection ................................................................................................................... 32'
Advanced'Control'.........................................................................................................................................'32'
Power Control ............................................................................................................................. 32'
Audio Delay ................................................................................................................................ 33'
System Controls ......................................................................................................................... 33'
EDID'Management'........................................................................................................................................'35'
Copy Preset EDID ...................................................................................................................... 36'
Copy EEPROM EDID ................................................................................................................. 37'
Write EDID Name (EEPROM) .................................................................................................... 38'
Read EDID Name (EEPROM) .................................................................................................... 38'
Write EDID Data to (EEPROM) .................................................................................................. 38'
Read EDID Data from (EEPROM) .............................................................................................. 39'
Read EDID Data from Output ..................................................................................................... 39'
Copy EDID Data from Output ..................................................................................................... 39'
WEB'Setting'......................................................................................................................................................'40'
General'Settings'............................................................................................................................................'40'
Screen Layout Selection ............................................................................................................. 41'
Video Input Selection .................................................................................................................. 41'
Aspect Ratio ............................................................................................................................... 41'
Audio Input ................................................................................................................................. 42'
Audio Volume: ............................................................................................................................ 43'
Output Timing: ............................................................................................................................ 43'
Advanced'Settings'.........................................................................................................................................'44'
Power Switch Selection .............................................................................................................. 44'
Audio Mute Selection .................................................................................................................. 45'
Auto Position Setting .................................................................................................................. 46'
Restore to default Setting ........................................................................................................... 46'
Serial Baud Rate Setting: ........................................................................................................... 46'
Other'.....................................................................................................................................................................'47'
F/W'Update'.......................................................................................................................................................'47'
Specifications'....................................................................................................................................................'48'
Relative'Products'Series:'...................................................................................................................................'49'
7 / 49
Getting Started
Panel Layout
Front Panel
ID
Name
Description
1
IR receive window
IR receive sensor, receives the IR signals
from the IR remote.
2
Input Buttons and Indicator
Presses the buttons 1~7 to select the
corresponding video or audio input. The
indicators mean the corresponding status of
the video or audio input.
3
Audio Selection Button and
Indicator
Presses this button, then the indicator lights
up, meaning switching between audio
outputs.
4
Video Input Button and
Indicator
Presses the buttons 1~4, indicating the
corresponding windows are selected. The
indicators mean whether this window is
effective.
5
Video Window Mode
Button and Indicator
Video window mode selection: single
window, double windows, triple windows
and quadruple windows. The indicators
mean whether this window is effective.
6
Output Resolution Button
and Indicator
Selects the related resolutions, then the
indicators light up.
7
Power Indicator
Indicates whether the power is working
properly or not.
8
Standby button and
indicator
l Switches between standby and normal
work modes.
l When this device is switched to the
standby mode, the indicator lights up.
8 / 49
Back Panel
ID
Name
Description
1
Power Switch
and 110/220
AC Power
Receptacle
Turn the power ON or OFF using this switch, Connect
the included AC power cord to this receptacle and
connect the plug to an available electrical outlet.
2
Analog audio
output
8 channel analog audio output, Connect a 3.5mm
mini-stereo cable from this jack to the Line In jack of a
multimedia system.
3
Optical output
Connect the optical output port to the digital audio input
port of your amplifier
4
HDMI output
Connect an HDMI cable from this port to an
HD or 4K display.
5
Analog audio
input 1~7
7 channel stereo analog audio input, Connect a 3.5mm
mini-stereo cable from the Line Out jack on the audio
source to this jack.
6
HDMI input 1～
4
Connect up to four Hi-Def sources to these inputs using
HDMI cables.
7
DisplayPort
input 1～2
Connect up to two Hi-Def sources to these inputs using
DisplayPort cables.
8
RGB/YPbPr
input
Connect up to a Hi-Def sources to this input using
DB-15 cable or YPbPr-VGA cable.
9
IP Cont.
Connect an Ethernet cable between
this jack and a LAN to use IP control.
Refer to RS-232 and IP Configuration for
more information on setting up IP control.
10
RS-232
Connect an RS-232 cable from this port
to an RS-232 device. See RS-232 and
IP Configuration for more information on
setting up RS-232 control.
9 / 49
IR Remote Control Unit
Button layout
ID
Name
Description
1
Power
Press this button to power-ON or power-OFF
the Multiviewer Switcher
2
Input 1-7
Press "1-7" buttons to select the corresponding
video input or audio input
3
Windows 1-4
Press "1-7" buttons to select the corresponding
window for select video input
4
Screen Layout
Press this buttons to select Single mode, Double
mode, TRIPLE mode and Quadruple mode
5
Audio
Press this button and then press the "1-7" buttons
to select the corresponding audio input
6
Mute
Press this button to Mute or UnMute the Multiviewer
Switcher audio output
7
Resolution
Press this button to change the Multiviewer
Switcher HDMI output resolution
10 / 49
HDMI/DP Cable Switcher (Optional)
ID
Name
Description
1
HDMI/DP Output
Connect up to 4k or Hi-Def HDMI/DP sources
2
Power Indicator
Indicates the power indicator.
3
Link Indicator
Indicates the connection status indicator.
4
Switch Button
Presses this button Multiviewer Switcher to switch
to this signal port.
5
HDMI/DP Input
Connects to the HDMI or DisplayPort ports of
Multiviewer Switcher using the HDMI cables.
Installation
How to Connect the Multiviewer Switcher
1. Connect up to four 4K or HD HDMI sources to the input ports (HDMI 1 - HDMI 4), Connect up to two 4K
or HD DisplayPort sources to the input ports (DISPLAYPORT 5 - DISPLAYPORT 6), Connect up to one
Hi-Def VGA or YPbPr sources to the input ports (RGB/YPbPr) on the Multiviewer Switcher
2. Connect an 4K or HD display to the HDMI Output port on the Multiviewer Switcher
3. OPTIONAL: Connect up seven stereo analog audio sources to audio input ports(1-7) on the Multiviewer
Switcher.
11 / 49
4. OPTIONAL: Connect the HDMI/DP input port of HDMI/DP cable switcher to the 4K or HD source device.
Connect the HDMI/DP input port of Multiviewer Switcher to the HDMI/DP output port of HDMI/DP cable
switcher using HDMI or DP cables.
5. OPTIONAL: Connect four 3.5mm mini-stereo cables from the jacks on the Multiviewer Switcher to the
“Line In” jack of a multimedia system, or connect an optical cable from the OPTICAL on the Multiviewer
Switcher to the “Optical In” of a multimedia system.
6. OPTIONAL: Connect an RS-232 cable from the RS-232 port on the Multiviewer Switcher to the RS-232
connector on the serial controller.
7. OPTIONAL: Connect an Ethernet cable from the LAN port on the Multiviewer Switcher to a Local Area
Network (LAN).
8. Connect the AC power cord to the Multiviewer Switcher and connect the plug to an available electrical
outlet.
Wiring Diagram
12 / 49
Operating
Standby Mode and Operational Mode
The “PWR” LED next to the Power button on the front panel indicates the power state of the Multiviewer
Switcher. This indicator remains illuminated as long as power is being supplied to the Multiviewer
Switcher. If this indicator does not illuminate, check the connection between the power receptacle on
the Multiviewer Switcher and the AC outlet.
In Standby mode the Standby indicator will light up until the Multiviewer Switcher wakes up. When the
normal work mode is used, the Standby indicator will turn off. There three methods to wake up the
device include the following: pressing the Standby button, pressing the ON/OFF button on the IR
remote or using LAN or RS232 commands.
Screen layout Configuration
The Multiviewer Switcher offers four window configurations: quadruple windows, triple windows, double
windows, and single window. The screen configuration is shown as follows.
13 / 49
Press the four buttons in the Screen Layout of the Multiviewer Switcher, corresponding to the four
modes above. For example, if you want to use the mode for quadruple windows, press the button so
that the icon is displayed or the button in the remote. The button indicator on the panel will light up,
and the picture output on the display device through HDMI will show quadruple windows. Meanwhile,
the video 1-4 indicators will light up.
The Multiviewer Switcher can display up to four sources. When multiple sources are displayed on the
screen, each source is regarded as a single window, and each window is defined as an input. However,
we want to define the operation in the single window to introduce the basic operation before
introduction to the operation in multiple windows. In the following example, seven HD sources (each
displayed as a single picture) are connected to Multiviewer Switcher. When the Multiviewer Switcher is
delivered from the factory, the default boot settings are loaded automatically (see below).
14 / 49
15 / 49
Single Window
1) Use the button on the front panel remote to set to the single window mode. When the Video 1
button indicator lights up, the Input 1 indicator will light up.
2) The HDMI output configures the HDMI 1 input. The window is shown as follows:
3) If you want to switch to the signal of DisplayPort5:
Method 1: Press the INPUTS 5 button on the front panel or remote.
Method 2: Press the Video 1 button on the front panel or remote.
The 1 button indicator on the panel will turn solid and the 2~7 button indicators will blink. If an
indicator is solid, it means that the source is currently selected. If an indicator is blinking, it means
that the source which can be selected.
4) When the 5 button indicator lights up, the panel status is shown as follows:
5) The HDMI output picture is changed to the signal of DisplayPort5.
! '
Loading...