Page 1
TEK 380-HD HDMI/SDI
Conference Camera
User’s Guide
Page 2
Page 3
TEK 380-HD Conference Camera
V031513
Table of Contents
Overview ......................................................................................................................... 4
Main Features ................................................................................................................. 4
Camera and Lens ...................................................................................................... 5
Pan/Tilt Movement .................................................................................................... 5
Rear Connectors ....................................................................................................... 6
RS-232 Pin Out ................................................................ ................................... 6
OSD Menu ...................................................................................................................... 8
Self-testing OSD Menu .............................................................................................. 8
Dome OSD ................................................................................................................ 8
LENS OSD ................................................................................................................ 9
IR Remote Controller ..................................................................................................... 10
Camera Switch Settings .................................................................................................11
SW1 Address Setting Table ..................................................................................... 11
SW2 Communication Protocol Settings ................................................................... 11
IR Address Select .................................................................................................... 12
Installation ..................................................................................................................... 12
Size ............................................................................................................................... 12
Specifications ................................................................................................................ 13
VISCA PROTOCOL ....................................................................................................... 15
Command Set ......................................................................................................... 15
Inquiry Command List ............................................................................................. 17
TEKVOX, Inc. – 210.348.6565 – www.TEKVOX.com San Antonio, TX 78216
2
Page 4
Page 5
TEK 380-HD Conference Camera
Overview
The TEK 380-HD conference camera is a high definition PTZ camera with 10X optical zoom lens and has
both HDMI and SDI outputs. With its small size, 16:9 aspect ratio, 2.1 Mega pixel CCD and 64 presets this
camera makes an excellent camera for videoconferencing rooms and lecture capture systems. The
camera can be setup for multiple resolutions and be ceiling mounted. Having a smaller size than most
similar quality cameras allows for smaller mounting brackets and cubby holes. This also makes the
camera not as visually intrusive as larger cameras. The camera can be controlled using the Sony®
VISCA™ or the PELCO P/D Command set. This makes the camera directly replaceable with other like
cameras.
Main Features
One of the most important features of this camera is it can support 64 presets (PELCO) 63 (VISCA) within
the camera. This makes the camera much easier to control as compared to other cameras that are only 6
to 15 presets. Other features include up to1080i@60 resolution with both HDMI and SDI outputs.
TEKVOX, Inc. – 210.348.6565 – www.TEKVOX.com San Antonio, TX 78216
4
Page 6
Camera and Lens
Video CMOS Sensor: 1/2.5 inch super quality HD CMOS transducer
Image: 16:9 2.1 Mega pixel
Resolution: HD 1080i@60; 1080p30; 720p/30; 720p/60
Lens zoom: 10x optical zoom, f=4.5-45mm F1.8-2.2
Focus, 1.0Lux at F 1.8
Wide angle lens: 0.7x wide angle lens, caliber 30mm
Visual Angle: 5.4°(farness) -70°(nearness)
Minimum Illumination: 10LUX
White Balance: Auto/Sunlight/Cloudiness/Shade/fluorescence white balance mode
Focus: Auto/Manual
Iris: Auto/Manual Electronic
Shutter: Auto Black light compensation: Auto
S/N Ratio: 50dB3.
Auto sensing position for ceiling installations
Pan/Tilt Movement
Pan Rotation: ±177.5 degree
Tilt Rotation: ±45 degree
Pan speed: 0.5°- 200°/sec
Tilt speed: 0.5°-150°/sec
Preset Speed: Pan running: 120°/sec
Tilt running: 100°/sec
Preset: 64 preset position
Page 7
TEK 380-HD Conference Camera
No
Function
1
DTR IN
2
DSR IN
3
TXD IN
4
GND
5
RXD IN
6
GND
7
NO Connection
8
NO Connection
Rear Connectors
HD-SDI
HDMI
IR Receiver
RS-232 In and Out
RS-485 (Input Connector)
12V DC
RS-232 Pin Out
Camera is shipped with a VISCA to DB-9 Female and an RS-485 adapter cable. When connecting the
camera to a control system, use the supplied RS-232 cable and connect to the RS-232 Input
connector. Only the TX, RX and GND need to be connected,
Input Connector – Connect to Control System using a straight through DB-9 and supplied
RS-232 Cable.
TEKVOX, Inc. – 210.348.6565 – www.TEKVOX.com San Antonio, TX 78216
6
Page 8
No
Function
1
DTR OUT
2
DSR OUT
3
TXD OUT
4
GND
5
RXD OUT
6
GND
7
NO Connection
8
NO Connection
RS-232C OUT Connector
Camera Union
Page 9
TEK 380-HD Conference Camera
OSD Menu
Access OSD menu to view the features of camera and change the settings. Note: Camera cannot move
pan/tilt when OSD menu is displaying.
Self-testing OSD Menu
When the camera is powered on, the camera performs a self-test and displays an OSD menu as following.
ADDRESS（Camera address）
BUADRATE（Camera baud rate）
PROTOCOL（PTZ Control Protocol）
CONTROL（Camera control type）
LENSTYPE（Camera module adopted）
DOMETYPE（Camera model No.）
VENDER（Manufacturer name）
VERSION （Factory version N
Dome OSD
Press “DOME OSD” button on remote controller to display and make changes to the camera’s Pan and Tilt
functions and its operation. When changes are made to these settings, their values are stored in the
camera’s nonvolatile memory.
These setting include:
PAN SPEED Default value: 30
o Adjustable pan movement speed scope 1~63
TILT SPEED Default value: 30
o Adjustable tile movement speed scope 1~63
SCAN SPEED Default value: 6
o Adjustable pan movement speed scope 1~63
TOUR PATH Default value: 1
o Optional tour path at 1~4
TOUR DWELL(Tour duration time) Default value: 5
o Tour duration is 1~60 seconds
PROPORTION (Speed matching) Default value: ON
o ON enable speed match function
AUTO REV Default value: P
o (P) Image auto flip (positive) / (N) upside down/OFF
FRAME FORMAT Default value: 1080i/60
o Other Settings - 1080p/30, 1080p/25, 1080p/24, 1080i/60, 1080i/50, 720p/60, 720p/50
OUTPUT TYPE Default value: DVI
o Other settings - HDMI / DVI
ASPECT RATIO (display mode) Default value: 16:9
o Other settings - 16:9/4:3
TEKVOX, Inc. – 210.348.6565 – www.TEKVOX.com San Antonio, TX 78216
8
Page 10
LENS OSD
Press “LENS OSD” button on remote controller to display and make changes to the camera’s Lens and its
image quality. When changes are made to these settings, their values are stored in the camera’s
nonvolatile memory.
ISS (Image Stable Mode) Default value: NO
o SUPPORT/NO Support option
ISE (Image Stable Mode) Default value: OFF
o ISE: ON/OFF
BLC (Back light comp) Default value: OFF
o BLC: ON/OFF
SELECT SCENE Default value: INACTIVE
o Select scene: ACTIVE/INACTIVE
SELECT SCENE Default value: NIGHT
o Under Active situation: AUTO/WDR/HIGH/NIGHT option
METERING LIGHT MODE Default value: WDR
o Optional Mode: CENTER/SPOT/WDR
EXPOSE MODE Default value: PAE
o Mode option: MANUAL/PAE/AAE/SAE
APERTURE MODE Default value:F1.8
o Aperture range: F1.8—F11
SHUTTER SPEED Default value:1/5
o Shutter speed range: 1/5—1/4000
EV CORRECTION Default value:+0
o Option value: -2/-1.66/-1.33/-1/-0.66/-0.33/0/ +0.33/+0.66/+1/ +1.33/+1.66/+2
ISO SENSITIVITY Default value: AUTO
o Option value: AUTO / MANUAL
MANUAL SETUP Default value:IS080
o Under manual ISO sensitivity, the parameter could be set to:
ISO80/ISO100/ISO200/ISO400/ISO800 /ISO1000
FLICKER REDUCTION Default value: ON
o Option: ON / OFF
WHITE BALANCE Default value: AUTO
o Option value: AUTO/CUSTOM/MANUAL/DAYLIGHT
/CLOUDY/SHADE/FLW/FLN/FLD/TUNGSTEN
DIGITAL EFFECT Default value: NORMAL
o Value option: NORMAL/SEPIA/MONOCHROM/ POSTERIZE/SOLARIZE/NEGA
SHARPNESS REDUCTION Default value: MIDDLE
o Setting option: HIGH/MIDDLE/LOW
NOISE REDUCTION Default value: MIDDLE
o Setting option: HIGH/MIDDLE/LOW/OFF
CHROMA KEY CR Default value: LOW
o Setting option: HIGH/MIDDLE/LOW
CHROMA KEY CB Default value: LOW
o Setting option: HIGH/MIDDLE/LOW
AUTO SLOW SHUTRER Default value: OFF
o In the situation of the light is dark to increase lighting volume.
Page 11
TEK 380-HD Conference Camera
IR Remote Controller
1. Reset: Restart Camera and restore to factory default settings
2. Camera Selection Select Camera of IR 1,2,3
3. Preset positions 1-9: positions
a. Set: Setting preset position
b. Clear: Clear preset position
c. Call: Call preset position Note: if you need set number 1
preset position, you should press Number key “1”, then
press “Set” to setting this position;
4. Zoom in/out Controls
a. + Zoom in
b. - Zoom out
5. Pan/tilt Controls
a. Move up
b. Move down
c. Move left
d. Move right
e. Auto Pan moving
6. Additional Functions (Note: These settings are not stored in the
camera’s nonvolatile memory. To store select the Dome OSD
and make a slight change and then exit.)
a. Freeze: image freeze
b. BL: Backlight compensation
c. WB: White Balance
d. AE: Auto Exposure
e. D zoom: Digital Zoom
f. HDMI: Change to HDMI Video output
g. DVI: Change to DVI video output
7. Camera Power Control - Switch from stand by and operational
8. OSD Menu Zone
a. Dome OSD – Enter Dome OSD menu
b. Lens OSD – Enter Lens OSD menu
9. Slow Zoom in/out Zone
a. + Zoom in slowly
b. - Zoom out slowly
10. Focus Control Zone
a. Auto: auto focus of lens
b. Manual: manual focus of lens
c. Far: focus at far distance objects
d. Near: focus at near distance objects
11. Pan/Tilt Function Zone
a. L-Limit: Set Left limit Scanning position
b. Scan: Enable Boundary scanning
c. R-Limit: Set Right limit scanning position
d. Home: Camera Home position
e. Tour: Enable Patrolling
12. Rev: Image auto-flip
TEKVOX, Inc. – 210.348.6565 – www.TEKVOX.com San Antonio, TX 78216
10
Page 12
SW1 Switch code state(1-7 Bit)
DIP1
DIP2
DIP3
DIP4
DIP5
DIP6
DIP7
1
ON
OFF
OFF
OFF
OFF
OFF
OFF
Default
2
OFF
ON
OFF
OFF
OFF
OFF
OFF
3 OFF
OFF
ON
OFF
OFF
OFF
OFF
4 OFF
OFF
OFF
ON
OFF
OFF
OFF
5 OFF
OFF
OFF
OFF
ON
OFF
OFF
6 OFF
OFF
OFF
OFF
OFF
ON
OFF
7 OFF
OFF
OFF
OFF
OFF
OFF
ON
Camera Switch Settings
SW1 Address Setting Table
Notes: PELCO protocol
Broadcast address：If the sent address is 255，any camera can be controlled.
Test Address：If the camera address is set to 0, any address code can control the camera.
SW2 Communication Protocol Settings
Default – All Off
Switch 1 – Baud Rate: On 38400 / Off 9600
Switch 2 – Transmission Type: On RS-485 / Off RS-232
Switch 3 – Protocol Type: On PELCO / Off VISCA
Switch 4 – IR Address Select (See Below)
Switch 5 – IR Address Select (See Below)
Switch 6 – IR: On Address Enabled / Off IR Address Disabled
Page 13
TEK 380-HD Conference Camera
IR Select
SW2( 4-5 Bit）Switch State
DIP-4
DIP-5
1
OFF
ON 2 ON
OFF
3
ON
ON
IR Address Select
Notes: When the IR select value is zero, any address of the remoter controller can control the camera.
Installation
The Camera can be mounted on the wall or ceiling using the bracket or tripod mount. When mounted to a
wall, you must use a shelf type mount and not mount the camera directly to the wall. Do not use a heavy
HDMI cable directly connected to the camera; use a smaller size adapter cable to reduce strain on the
HDMI connector.
Size
TEKVOX, Inc. – 210.348.6565 – www.TEKVOX.com San Antonio, TX 78216
12
Page 14
Model
HD-380
Image
Sensor
CCD
1/2.5 model, primary color CMOS, 2.1 M
compatible
Minimum Scene
Illumination
6Lux(F1.8/50IRE/TV=1/30sec,
1920×1080movie)
1Lux (F1.8/50IRE/TV=1/8sec,
1920x1080 movie night mode)
White Balance
auto/daylight/cloudy/shade/fluorescent lamp
W (white)/fluorescent lamp N
(Natural)/fluorescent lamp D (daylight) /
tungsten /custom/manual
Gain Control
Auto
Back-light
compensation
On/Off
Electronic shutter
1/50-1/4,000S
S/N Ratio
>50dB
Lens
Focus
Auto/Manual
Iris
Auto/Manual
Zoom
10 Optical Zoom
f = 4.5 – 45.0 mm F1.8 – 2.2
Video Output
HD-SDI，HDMI
Video Format
1080P@30，1080P@25，1080P@24，
1080I@60， 1080I@50，720P@60，
720P@50
Communication
RS-485
EIA/RS-232C（Bidirectional）
Protocol
PELCO_P，PELCO_D，VISCA
Baud Rate
38400/9600 bps (9600 Default)
Presets
64 presets (PELCO) 63 (VISCA)
OSD Menu
Supported
Auto Rev
P/N/OFF (Support auto reverse)
Pan Speed
0-280 degree per second
Tilt Speed
0-100 degree per second
Pan Rotation Angle
(59 degrees continuously
Tilt Rotation Angle
240 degrees
Specifications
Page 15
TEK 380-HD Conference Camera
Auto Pan Scan
Supported
Boundary Scan
0-359 degree
Remoter Control
IR wireless control P/T/Z
Power Supply
DC 12V+-10%；1.2A
Temperature and humidity
0-60 ℃(Temperature)，0-95% RH
Size
W: 4.9-4.7-5.7 in / H: 6.6-5.7-6.3 in
Weight
1.76 lbs / 2.86 lbs（Package）
Specifications are subject to change without notice.
TEKVOX, Inc. – 210.348.6565 – www.TEKVOX.com San Antonio, TX 78216
14
Page 16
Command Type
Command
Packet
Comments
Address Set
Broadcast
88 30 01 FF
Address Set (Daisy chain)
IF_Clear
Broadcast
88 01 00 01 FF
IF Clear
Command Cancel
8x 2p FF
p:socket number(1,2)
Camera Power
On
Off (Standby)
8x 01 04 00 02 FF
8x 01 04 00 03 FF
Power On/Off
Camera Zoom
Stop
Tele(Standard)
Wide(Standard)
Tele(Variable)
Wide(Variable)
Direct
Direct(Variable)
8x 01 04 07 00 FF
8x 01 04 07 02 FF
8x 01 04 07 03 FF
8x 01 04 07 2p FF
8x 01 04 07 3p FF
8x 01 04 47 0p 0q 0r 0s FF
8x 01 7E 01 4A 0v 0p 0q 0r 0s FF
pqrs: Zoom Position*
v:(Speed) 0-7
Camera Focus
Stop
Far(Standard)
Near(Standard)
Far(Variable)
Near(Variable)
Auto Focus
Manual Focus
Auto/Manual
Direct
8x 01 04 08 00 FF
8x 01 04 08 02 FF
8x 01 04 08 03 FF
8x 01 04 08 2p FF
8x 01 04 08 3p FF
8x 01 04 38 02 FF
8x 01 04 38 03 FF
8x 01 04 38 10 FF
8x 01 04 48 0p 0q 0r 0s FF
pqrs: Focus position
Camera WB
Auto
Manual
One Push WB
8x 01 04 35 00 FF
8x 01 04 35 05 FF
8x 01 04 35 03 FF
pqrs: Focus position
Camera AE
Auto
Manual
Shutter Priority
Iris Priority
8x 01 04 39 00 FF
8x 01 04 39 03 FF
8x 01 04 39 0A FF
8x 01 04 39 0B FF
Camera Shutter
Direct
8x 01 04 4A 00 00 0p 0q FF
pq: Shutter Position
Camera Iris
Direct
8x 01 04 4B 00 00 0p 0q FF
pq: Iris Position
Camera
Back Light
On
Off
8x 01 04 33 02 FF
8x 01 04 33 03 FF
Back Light Compensation ON/OFF
Camera Memory
Reset
Set
Recall
8x 01 04 3F 00 0p FF
8x 01 04 3F 01 0p FF
8x 01 04 3F 02 0p FF
p: Memory Number (=1 to 3F)
Corresponds to 1 to 9 on the Remote
Video Format
8x 01 06 35 00 0p FF
p: Video format
1 1920×1080p/30
2 1920×1080i/ 60
3 1280×720p/60
9 1920×1080p/25
A 1920×1080i/50
B 1280×720p/50
D 1920×1080p/24
VISCA PROTOCOL
Protocol for the TEK 380-HD Camera is similar, but not identical to the Sony® VISCA™ command set.
There are extra commands that are supported by this camera that are not in the VISCA commands.
Command Set
Page 17
TEK 380-HD Conference Camera
Command
Type
Command
Packet
Comments
IR Receive
On
Off
8x 01 06 08 02 FF
8x 01 06 08 03 FF
IR Receiver On/Off
Color system
RGB
YPbPr
8x 01 7E 01 03 00 00 FF
8x 01 7E 01 03 00 01 FF
Color-reproduction format setting
Pan-tilt Drive
Up
Down
Left
Right
Up Left
Up Right
Down Left
Down Right
Stop
Absolute Position
Relative
Position
Home
Reset
8x 01 06 01 VV WW 03 01 FF
8x 01 06 01 VV WW 03 02 FF
8x 01 06 01 VV WW 01 03 FF
8x 01 06 01 VV WW 02 03 FF
8x 01 06 01 VV WW 01 01 FF
8x 01 06 01 VV WW 02 01 FF
8x 01 06 01 VV WW 01 02 FF
8x 01 06 01 VV WW 02 02 FF
8x 01 06 01 VV WW 03 03 FF
8x 01 06 02 VV WW
0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF
8x 01 06 03 VV WW
0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF
8x 01 06 04 FF
8x 01 06 05 FF
VV: Pan speed 0 x01 (low speed) to 0 x18
(high speed)
WW: Tilt Speed 0 x 01 (low speed) to 0 x14
(high speed)
YYYY: Pan Position 0000 to 07E0 (left
0000)
ZZZZ: Tilt Position 0000 to 01C8 (down
0000)
Pan-tilt
Limit Set
Limit Set
Limit Clear
8x 01 06 07 00 0W
0Y 0Y 0Y 0Y 0Z 0Z 0Z 0Z FF
8x 01 06 07 01 0W
07 0F 0F 0F 07 0F 0F 0F FF
W: 1 Up Right 0: Down Left
YYYY: Pan Position 0000 to 07E0 (left
0000)
ZZZZ: Tilt Position 0000 to 01C8 (down
0000)
TEKVOX, Inc. – 210.348.6565 – www.TEKVOX.com San Antonio, TX 78216
16
Page 18
Command
Type
Command
Packet
Receive Packet
Comments
Camera Power
Inquiry
8x 09 04 00 FF
y0 50 02 FF
y0 50 03 FF
y0 50 04 FF
On
Off (Standby)
Internal power circuit error
Camera Zoom
Pos, Inquiry
8x 09 04 47 FF
y0 50 0p 0q 0r 0s FF
pqrs: Zoom Position
Camera Focus
Mode Inquiry
8x 09 04 38 FF
y0 50 02 FF
y0 50 03 FF
Auto Focus
Manual Focus
Camera WB
Mode Inquiry
8x 09 04 35 FF
y0 50 00 FF
y0 50 01 FF
y0 50 02 FF
y0 50 03 FF
y0 50 05 FF
Auto
In Doors
Out Doors
One Push WB
Manual
Camera AE
Mode Inquiry
8x 09 04 39 FF
y0 50 00 FF
y0 50 03 FF
y0 50 0A FF
y0 50 0B FF
Full Auto
Manual
Shutter Priority
Iris Priority
Camera
Shutter Pos,
Inquiry
8x 09 04 4A FF
y0 50 00 00 0p 0q FF
pq: Shutter Position
Camera Iris
Pos, Inquiry
8x 09 04 4B FF
y0 50 00 00 0p 0q FF
pq: Iris Position
Camera Back
Light Mode
Inquiry
8x 09 04 33 FF
y0 50 02 FF
y0 50 03 FF
On
OFF
Video Format
Inquiry
8x 09 06 23 FF
y0 50 01 FF
y0 50 02 FF
y0 50 03 FF
y0 50 09 FF
y0 50 0A FF
y0 50 0B FF
y0 50 0D FF
1920×1080p/30
1920×1080i/60
1280×720p/60
1920×1080p/25
1920×1080i/50
1280×720p/50
1920×1080p/24
Camera Pan
Tilt Pos, Inquiry
8x 09 06 12 FF
y5 50 0w 0w 0w 0w
0z 0z 0z 0z FF
wwww = Pan Position
zzzz = Tilt Position Speed
Color System
Inquiry
8x 09 7E 01 03 FF
y0 50 00 FF
y0 50 01 FF
RGB
YPbPr
Inquiry Command List
Loading...