Tektronix Z-Active Probe Read This First Read This First

Z-Activet Probe Deskew Fixture Read This First

This sheet describes how to assemble the Z-Active Probe Deskew Fixture. The next table lists the parts you received in the shipping container.

Quantity Part number Description

1 each 071-1768-XX Deskew fixture instuctions

1 each NS Deskew fixture base

1 each NS Deskew board

2 each NS Screws, 6-32 X 0.312, phil

1 each NS Solder box

2 each NS Screws, 8-32 X 0.25 poz

1 each 012-0076-00 RF cable, 50 ohm, BNC to BNC

1 each 174-5194-00 USB cable, 6 ft

1 each 131-7931-00 Pins (bag of 20)

NS -- Not Saleable

To assemble the probe deskew fixture, follow these steps:

1. Align the deskew board on the fixture base, and install the two 6-32 screws.

Deskew board

6--32 screws (2)

Deskew fixture base

*P071205301*

071-2053-01

Read This First

2. Align the solder box on the fixture base, and install the two 8-32 screws.

Deskew fixture base

Solder box

8--32 screws (2)

3. Refer to the Z-Active Probe Deskew Fixture Instructions (Tektronix part

number 071-1768-XX) for information on how to use the fixture to deskew Z-Active probes.

www.tektronix.com

Specifications and Main Features