Tektronix TLA7SA16, P67SA08 Performance Verification

xx

TLA7SA08 & TLA7SA16 Series

ZZZ

Product Specifications & Performance Verification

Technical Reference Manual

This document applies to TLA System Software V5.7 or higher.

www.tektronix.com

P077040202*

*

077-0402-02

Copyright © Tektronix. All rights reserved. Licensed software products are owned by Tektronix or its subsidiaries
or suppliers, and are protected by national copyright laws and international treaty provisions.

Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication
supersedes that in all previously published material. Specifications and price change privileges reserved.

TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.

Contacting Tektronix

Tektronix, Inc.
14150 SW Karl Braun Drive
P.O. Box 5 0 0
Beaverto
USA

For product information, sales, service, and technical support:

n, OR 97077

In North America, call 1-800-833-9200.
Worl dwid e, visi t www.tektronix.com to find contacts in your area.

Table of Contents

Preface .............................................................................................................. iii

Related Documentation ...................................................................................... iii

Specifications and Characteristics ............... .................................. ............................... 1

Atmospheri

TLA7SA08 & TLA7SA16 Logic Protocol Analyzer Modules Specifications .............................. 3

P67SA01SD Probe Specifications ............................................................................... 12

P67SAxx Midbus Probe Specifications ......................................................................... 13

P67SAxxS Slot Interposer Specifications....................................................................... 14

P67SA16G2 Midbus Probe Specifications.......................... .................................. .......... 16

P6716G3

Performance Verification Procedures............................................................................ 19

Functional Check Procedures ............ ................................ .................................. ...... 20

Functional Verification ....... .................................. ................................ .............. 20

c Characteristics........................................... ................................ ....... 1

Midbus Probe Specifications ......................................................................... 17

TLA7SA08 & TLA7SA16 Series Product Specifications & Performance Verification i

Table of Contents

List of Tables

Table 1: Atmospheric characteristics............................................................................. 1

Table 2: Dat

Table 3: Width and depth .......................................................................................... 3

Table 4: Clocking................................................................................................... 3

Table 5: SerDes ..................................................................................................... 3

Table 6: Lane processing .......................................................................................... 4

Table 7: Link processing...................................... .................................. ................... 5

Table 8: E

Table 9: Filtering . . .... . ..... . ..... . .... . ..... . ..... . ... . . ..... . ..... . ..... ..... . ..... . ..... . .... . . .... . ..... . ..... . 7

Table 10: Trigger state machine ................. ................................ ................................. 8

Table 11: Trigger machine actions................................................................................ 8

Table 12: Module input/trigger/backplane delay relationships . . ..... . ..... . ..... . ..... . ..... . ..... . ..... . .... 9

Table 13: Storage control ......................................................................................... 10

Table

Table 15: Configuration memory ................................................................................ 10

Table 16: Mechanical ............................................................................................. 11

Table 17: Electrical specification for P67SA01SD probe..................................................... 12

Table 18: Cable specifications for P67SA01SD probe.. ................................ ...................... 12

Table 19: Atmospheric characteristics for P67SA01SD probe ............................................... 12

ble 20: Electrical specification for P67SAxx midbus probe ............................................... 13

Ta

Table 21: Atmospheric characteristics for P67SAxx midbus probe ......................................... 13

Table 22: Mechanical characteristics for P67SAxx midbus probe........................................... 13

Table 23: Electrical specification for P67SAxxS slot interposer ............................................. 14

Table 24: Cable specifications for P67SAxxS slot interposer ........................ ........................ 14

Table 25: Mechanical characteristics for P67SAxxS slot interposer......................................... 15

Table 26: Atmospheric characteristics for P67SAxxS slot interposer ....................................... 15

Table 27: Electrical specification for P67SA16G2 midbus probe............................ ................ 16

Table 28: Atmospheric characteristics for P67S16AG2 midbus probe................ ...................... 16

Table 29: Electrical specification for P6716G3 midbus probe ............................................... 17

Table 30: Atmospheric characteristics for P67S16AG3 midbus probe................ ...................... 17

a input for differential probes....................................................................... 3

vent recognizer resources. ................................ ................................ ............. 6

14: Data placement................................... .................................. .................... 10

ii TLA7SA08 & TLA7SA16 Series Product Specifications & Performance Verification

Preface

Related Documentation

This document provides the specifications of the TLA7SA16 and TLA7SA08
Logic Protocol Analyzer Modules for the TLA7012 and TLA7016 mainframes
and high-lev

el procedures to verify that the products are functioning correctly.

The follow

ing table lists related documentation that is available for your Tektronix
logic analyzer family product. The documentation is available on the TLA
Documentation CD included with your instrument and on the Tektronix Web
site (www.tektronix.com). Refer to the Tektronix Web site for the most current
documentation.

To obtain documentation that is not specified in the table, contact your local
Tektronix representative.

Related documentation

Item Purpose

TLA Quick Start User Manuals

Online Help

Installation Reference Sheets High-level installation information

Installation Manuals

XYZs of Logic Analyzers

Declassification and Securities instructions Data security concerns specific to sanitizing

Application notes

Product Specifications & Performance
Verification Procedures

TPI.NET Documentation

Field upgrade kits

Optional Service Manuals Self-service documentation for modules and

High-level operational overview

In-depth operation and UI help

Detailed first-time installation information

Logic analyzer basics

or removing memory devices from Tektronix
products

Collection of logic analyzer application
specific notes

TLA Product specifications and performance
verification procedures

Detailed information for controlling the logic
analyzer using .NET

Upgrade information for your logic analyzer

mainframes

TLA7SA08 & TLA7SA16 Series Product Specifications & Performance Verification iii

Preface

iv TLA7SA08 & TLA7SA16 Series Product Specifications & Performance Verification

Specifications and Characteristics

All specifications in this document are guaranteed unless noted Ty pic al.Typical
characteristics describe typical or average performance and provide useful
reference in

formation.

Specifications that are marked with the
indirectly

The performance limits in this specification are valid with these conditions:

The instrument must be in an environment with temperature, altitude,
humidity, and vibration within the operating limits described in these
specifica

The instrument must have had a warm-up period of at least 30 minutes.

For modules, the performance limits in this specification are valid with these
conditions:

The logic protocol analyzer modules must be installed in a Logic Analyzer
Mainframe.

The module must have been calibrated/adjusted at an ambient temperature
between +20 °C and +30 °C.

Atmospheric Characteristics

The following table lists the Atmospheric characteristics of the Tektronix logic

tocol analyzers.

pro

symbol are checked directly (or

) at your nearest Tektronix location.

tions.

Table 1: Atmospheric characteristics

Characteristic Description

Temperature

Relative Hum idity

Operating (no media in CD or DV D drive of the mainframe)

0 °C to +40 °C, 15 °C/hr maximum gradient, noncondensing, derated 1°C per 300 meters (~1000 ft)
above 1500 meters (~5000 ft) altitude

Nonoperating (no media)

-20 °C to +60 °C, 15 °C/hr maximum gradient, without disk media installed in disk drives

Operating (no media)

5% to 95% relative humidity (%RH), up to +30 °C

5% to 75% relative humidity above +30 °C up to +40 °C, noncondensing and as limited by a Maximum
Wet-bulb Temperature of +29.4 °C

Nonoperating (no media)

5% to 95% relative humidity (%RH) up to +30 °C, 75% RH up to 60 °C, noncondensing, and as limited
by a Maximum Wet-Bulb Temperature of +40 °C (derates relative humidity to 20% RH at +60 °C)

TLA7SA08 & TLA7SA16 Series Product Specifications & Performance Verification 1

Specifications and Characteristics

Table 1: Atmospheric characteristics (cont.)

Characteristic Description

Altitude

Operating

Up to 3,000 meters (~10,000 ft), derated 1 °C per 300 meters (~1000 ft) above 1500 meters (~5000 ft)
altitude

Nonoperating

Up to 12,000 meters (~40,000 ft)

2 TLA7SA08 & TLA7SA16 Series P roduct Specifications & P erformance Verification

TLA7SA08 & TLA7SA16 Logic Protocol Analyzer Modules Specifications

TLA7SA08 & TLA

7SA16 Logic Protocol Analyzer Modules

Specifications

Table 2: Data input for differential probes

Characteri

Data rate

Number of FTS packets required to resynchronize
following the L0s exit

(Typical

Table 3: Width and depth

Characteristic Description

Acquisition memory depth

stic

)

TLA7SA08 8 differential inputs, x4 linkNumber of inputs

TLA7SA16 16 differential inputs, x8 link

TLA7SA08 160 mega samples per differential input (4 GB physical memory total)

TLA7SA16 160 mega samples per differential input (8 GB physical memory total)

Descriptio

2.5 Gbps and

8.0 Gbps (modulated from -10% and +5%)

Gen1: 20 ns EIDLE minimum ÷ 4 FTS

Gen2: 20 ns EIDLE minimum ÷ 1 EIEO S + 6 FTS

Gen3: 20 n

n

5.0 Gbps (modulated from -10% to +10%)

s EIDLE minimum ÷ 1 EIEOS + 4 FTS

Table 4: Clockin g

Characteristic Description

External reference clock

Minimum peak-to-peak differential input voltage

pical)

(Ty

solute differential input voltage limit (Typical)

Ab

ock frequency (Typical)

Cl

requency tolerance (Typical)

F

150 mV

2.5 V

100 MHz

MHz through 110 M Hz when acquiring frequency margined data

90

±300 ppm

Table 5: SerDes

Characteristic D escription

Clock encoding standard Supports 8b/10b encoded serial data

Supports 128b/130b encoded serial data

TLA7SA08 & TLA7SA16 Series Product Specifications & Performance Verification 3