TLA708EX Tektronix Logic Analyzer
Declassification and Security
Instructions
www.tektronix.com
077-0043-00
Copyright © Tektronix. All rights reserved. Licensed software products are owned by Tektronix or its subsidiaries
or suppliers, and are protected by national copyright laws and international treaty provisions.
Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication
supersedes that in all previously published material. Specifications and price change privileges reserved.
TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.
Contacting Tektronix
Tektronix, Inc.
14200 SW Karl Braun Drive
P.O. Box 500
Beaverton, O
USA
For product information, sales, service, and technical support:
In North America, call 1-800-833-9200.
Worl dwid e, v isit www.tektronix.com to find contacts in your area.
R 97077
Date: April 3, 2006
Subject: Memory Erasure & Memory Parts in TLA708EX.
MEMORY ERASURE PROCEDURE
• Turn the power off for at least 20 seconds to clear volatile memory.
MEMORY PARTS
Teklink Hub Board P/N: 671-5923-00
Part Number Reference
designator
156-8978-00 U500
U502
156-9307-00 U501 IC, Memory; CMOS, Flash; 4M X 8 Flash: Stores the instrument
IC, Memory; CMOS, SDRAM;
4M X 16Bit X 4
If you have any questions, contact the Tektronix Technical Support Center at 1-800-833-9200*3.
Description Use
SDRAM: Stores the
instrument code in volatile
memory.
code and MAC address in
non-volatile memory.
Loading...