Tektronix STP-ENCL Accessory Box Packing List PA-808 Rev. A User manual

Keithley Instruments, Inc.

28775 Aurora Road
Cleveland, Ohio 44139
[phone]
Fax: [phone]
www .keithley.com

STP-ENCL Accessory Box

Packing List

Introduction

The STP-ENCL is a standard Keithley accessory box that has cable cutouts and board supports, and is for use with those
STA and STP models that do not normally have an enclosure. It can be used with the following STP and STA models:

STA-3108-A1
STA-3108-A2
STA-3108-D1
STP-36
STP-36CJC
STP-37, -37/F
STP-50
STP-68
STP-3140

The following accessories are too large and DO NOT FIT:

CONN-3160D1
STA-1800HC
STA-300*
STA-3108-A3
STP-100, -100U
STA-3110*

*Information is available on a compatible enclosure for these boards. Keithley does not stock this enclosure.

Parts list

Keithley

Qty.

1
4
4

part number Description

22070
12021
12620

Plastic case with lid.
Screws for the case.
Circuit board supports

Installation

1. Insert the circuit board supports in the mounting holes of the STA/STP to be installed.

2. Dry-fit the STA/STP into the box and verify the proper positioning for cable access.

3. Peel the paper liner off of the adhesive foot of the board supports.

4. Press firmly into the desired location within the enclosure.

PA-808 Rev. A / 10-01