Tektronix SPG3UP 01, SPG6UP 01, SPG6UP 02, SPG6UP 03, SPG600 Instructions Manual

Instructions

SPG3UP 01, SPG6UP 01, SPG6UP 02, and
SPG6UP 03 Option Upgrades
SPG600 & SPG300 Sync Pulse Generators

075-0845-00

Warning

The servicing instructions are for use by qualified
personnel only. To avoid personal injury, do not
perform any servicing unless you are qualified to
do so. Refer to all safety summaries prior to
performing service.

www.tektronix.com

*P075084500*

075084500

Copyright © Tektronix, Inc. All rights reserved.

Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication
supercedes that in all previously published material. Specifications and price change privileges reserved.

Tektronix, Inc., P.O. Box 500, Beaverton, OR 97077

TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.

Service Safety Summary

Only qualified personnel should perform service procedures. Read this Service
Safety Summary and the General Safety Summary in the product service manual or

the user manual.

Do Not Service Alone. Do not perform internal service or adjustments of this
product unless another person capable of rendering first aid and resuscitation is
present.

Disconnect Power. To avoid electric shock, disconnect the mains power by means
of the power cord or, if provided, the power switch.

Use Care When Servicing With Power On. Dangerous voltages or currents may exist
in this product. Disconnect power, remove battery (if applicable), and disconnect
test leads before removing protective panels, soldering, or replacing components.

To avoid electric shock, do not touch exposed connections.

SPG600 & SPG300 Sync Pulse Generators Upgrade Kit i

Service Safety Summary

ii SPG600 & SPG300 Sync Pulse Generators Upgrade Kit