Tektronix SPECMON3, SPECMON6 Online Help
xx
SPECMON3 Real-Time Spectrum Analyzer
ZZZ
SPECMON6 Real-Time Spectrum Analyzer
Printable Help
*P077074000*
077-0740-00
SPECMON3 Real-Time Spectrum Analyzer
SPECMON6 Real-Time Spectrum Analyzer
ZZZ
Printable Help
www.tektronix.com
077-0740-00
Copyright © Tektronix. All rights reserved. Licensed software products are owned by Tektronix or its
subsidiaries or suppliers, and are protected by national copyright laws and international treaty provisions.
Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this
publication supersedes that in all previously published m aterial. Specifications and price change privileges
reserved.
TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.
Online help version: 3.0
Contactin
Tektronix, Inc.
14150 SW Karl Braun Drive
P. O . B o x 5 0 0
Beaverton, OR 97077
USA
For product information, sales, service, and technical support:
g Tektronix
In North America, call 1-800-833-9200.
Worldwide, visit www.tektronix.com to find contacts in your area.
Table of Contents
Welcome
Welcome............................................................................................................. 1
About Tektronix Analyzers
Your Tektronix Analyzer........................................................................................... 3
Product Software ...................... ................................ .................................. ........... 4
Accessories
Standard Accessories.......................................................................................... 4
Recommended Accessories................................................................................... 6
Options
Options.......................................................................................................... 7
Documentation and Support
Documentation................................................................................................. 7
Table of Contents
Orientation
Front Panel Connectors . .................................. ................................ ......................... 9
Front-Panel Controls ................................ .................................. ............................. 9
Touch Screen............................. .................................. ................................ ........ 13
Touch-Screen Actions............................................................................................. 13
Elements of the Display........................................................................................... 15
Rear-Panel Connectors............................................ ................................ ................ 19
Setting Up Network Connections . ..... .... . .... . .... ... . . .... . .... . .... ..... .... . .... . .... .... . .... . .... . .... ... 19
Operating Your Instrument
toring Default Settings...... ................................ ................................ .................. 21
Res
Running Alignments .......... ................................ ................................ .................... 21
Presets. ................................ ................................ .................................. ............ 22
Setting Options. . .... ..... .... . .... . .... . .... ..... .... . .... . .... . .... ..... .... . .... . .... . .... ..... .... . .... . .... . ... 27
Operating System Restore........................................................................................ 30
Using the Measurement Displays
Selecting Displays ............. .................................. ................................ .................. 31
Taking Measurements
Measurements
Available Measurements ........... ................................ .................................. ........ 33
SPECMON3 & SPECMON6 Printable Help i
Table of Contents
GeneralSignalViewing
Overview ........................................................................................................... 39
DPX
DPX Primer ................................. ................................ .................................. 39
DPX Display Overview .......... ................................ ................................ ............ 62
DPX Display .................... .................................. ................................ ............ 62
DPX Settings .. . . .... . .... . .... ..... ..... .... . .... . .... . .... . .... ..... ... . . .... . .... . .... ..... ..... .... . .... . .. 70
Time Overview
Time Overview Display...................................................................................... 88
Time Overview Settings ..................................................................................... 90
Spectrum
Spectrum Display................. .................................. ................................ .......... 94
Spectrum Settings.. . .... .... . .... . .... .... . .... . .... .... . .... . .... .... . .... . .... .... . .... . .... ... . . .... . .... .. 95
Spectrogram
Spectrogram Display ................. ................................ ................................ ........ 97
Spectrogram Settings . ..... .... . .... . .... ..... .... . .... . .... ... . . .... . .... ..... .... . .... . .... . .... .... . .... . 99
Amplitude Vs Time
Amplitude Vs Time Display. ................................ .................................. ............ 103
Amplitude Vs Time Settings .......................... .................................. .................. 104
Frequency Vs Time
Frequency Vs Time Display ............................................................................... 105
Frequency Vs Time Settings.. . .... . .... . .... . .... . .... . .... . .... . .... . .... ..... ..... ..... ..... .... . ... . . .. 106
Phase Vs Time
Phase Vs Time Display..................................................................................... 107
Phase Vs Time Settings . ... . . .... . .... . .... .... . .... . .... . .... ..... .... . .... . .... ..... ... . . .... . .... . .... .. 108
RF I & Q Vs Time
RF I & Q vs Time Display................................................................................. 109
RF I & Q vs Time Settings.... . .... . .... . .... . .... . .... . .... . .... . .... . .... . .... . .... . .... . .... . .... . .... .. 110
Common Controls for General Signal Viewing Displays
General Signal Viewing Shared Measurement Settings .... ... . . .... . .... ..... .... . .... . .... ..... .... . . 112
Analog Modulation
Overview ......................................................................................................... 125
AM
AM Display ....................... ................................ .................................. ........ 125
AM Settings ................................................................................................. 126
FM
FM Display .................................................................................................. 132
FM Settings.. . .... . .... ..... .... . .... . .... . .... .... . .... . .... . .... ..... .... . .... . .... ..... ..... .... . .... . .... 134
PM
PM Display .................................................................................................. 140
PM Settings.. . .... . .... ..... .... . .... . .... . .... .... . .... . .... . .... ..... .... . .... . .... ..... ..... .... . .... . .... 142
ii SPECMON3 & SPECMON6 Printable Help
RF Measurements
Overview ......................................................................................................... 149
Chan Power and Strength
Channel Power and Strength Display..................................................................... 149
Channel Power & Strength Settings ..... .... . .... . .... ..... .... . .... . .... .... . .... . .... ... . . .... . .... ... . 153
MCPR
MCPR (Multiple Carrier Power Ratio) Display . . .... . .... .... . .... . .... ... . . .... . .... ... . . .... . .... .... 156
MCPR Settings............ .................................. ................................ ................ 159
Occupied BW & x dB BW
Occupied BW & x dB BW Display............... ................................ ........................ 165
Occupied BW & x dB BW Settings ...... ................................ ................................ 168
Spurious
Spurious Display............................................................................................ 169
Spurious Display Settings. .... . .... . .... . .... . .... . .... ..... ..... .... . .... . .... . .... . .... ..... ..... ... . . ... 173
CCDF
CCDF Display............................................................................................... 180
CCDF Settings . . .... . .... ... . . .... . .... ... . . .... . .... ..... .... . .... . .... .... . .... . .... .... . .... . .... .... . ... 181
Phase Noise
Phase Noise Display........................................................................................ 182
Phase Noise Settings . . .... . .... . .... . .... ..... ..... .... . .... . .... . .... . .... ..... ..... .... . .... . .... . .... . .. 186
Settling Time Measurements
Settling Time Measurement Overview .... . .... .... . .... . .... ..... ... . . .... . .... . .... .... . .... . .... ..... . 189
Settling Time Displays
Settling Time Displays . .... . .... . .... ... . . .... . .... . .... . .... .... . .... . .... . .... . .... .... . .... . .... . .... . .. 193
Settling Time Settings ... ..... .... . .... . .... . .... . .... . .... . .... ..... ..... .... . .... . .... . .... . .... . .... . .... 200
Common Controls for Settling Time Displays
Settling Time Displays Shared Measurement Settings . .... ..... ... . . .... . .... . .... ... . . .... . .... . .... . 201
SEM (Spectrum Emission Mask)
SEM Display ................................................................................................ 208
Spectrum Emission Mask Settings .... . .... . .... ..... ... . . .... . .... . .... ..... ... . . .... . .... . .... ..... ..... 211
Common C ontrols for RF Measurements Displays
RF Measurements Shared Measurement Settings . .... . .... ..... .... . .... . .... ..... .... . .... . .... . .... .. 218
Table of Contents
OFDM Analysis
Overview ......................................................................................................... 227
OFDM Chan Response
OFDM Channel Response Display ....................................................................... 227
OFDM Channel Response Settings ... . .... ..... .... . .... . .... . .... . .... . .... ..... .... . .... . .... . .... . .... 2 29
OFDM Constellation
OFDM Constellation Display ............................................................................. 230
OFDM Constellation Settings ... . .... . .... ..... ..... .... . ... . . .... . .... . .... . .... . .... . .... . .... ..... ..... 231
OFDM EVM
SPECMON3 & SPECMON6 Printable Help iii
Table of Contents
OFDM EVM Display .. ................................ ................................ .................... 231
OFDM EVM Settings .... . .... ..... .... . .... . .... ... . . .... . .... ..... .... . .... . .... . .... .... . .... . .... ... . . . 232
OFDM Mag Error
OFDM Magnitude Error Display ......................................................................... 233
OFDM Magnitude Error Settings......................................................................... 234
OFDM Phase Error
OFDM Phase Error Disp
OFDM Phase Error Settings . . .... . .... . .... ..... .... . .... . .... ..... ... . . .... . .... . .... .... . .... . .... . .... . 236
OFDM Power
OFDM Power Display ..................................................................................... 237
OFDM Power Settings ..... .... . .... . .... ..... ... . . .... . .... . .... ... . . .... . .... . .... . .... .... . .... . .... . ... 238
OFDM Summary
OFDM Summary Display.............................. ................................ .................... 239
OFDM Summary Settings ................................................................................. 241
OFDM Symb Table
OFDM Symbol Table Display............................................................................. 242
OFDM Symbol Table Settings . ..... .... . .... . .... .... . .... . .... ... . . .... . .... ..... .... . .... . .... ..... .... 243
Common Controls for OFDM Analysis Displays
OFDM Analysis Shared Measurement Settings .... . .... ... . . .... . .... . .... . .... .... . .... . .... . .... . .... 243
lay ......... ................................ .................................. .... 235
Pulsed RF
Overview ......................................................................................................... 251
Pulse Table Display
Pulse Table Display......................... ................................ ................................ 251
Pulse Table Settings .... .... . .... . .... . .... ..... .... . .... . .... ..... ... . . .... . .... . .... .... . .... . .... . .... ... 252
Pulse Trace Display
Pulse Trace Display........................................... .................................. ............ 253
Pulse Trace Settings .... .... . .... . .... . .... . .... .... . .... . .... . .... . .... .... . .... . .... . .... . .... .... . .... . .. 255
Pulse Statistics
Pulse Statistics Display..................................................................................... 255
Pulse Statistics Settings .................................. ................................ .................. 257
Common Controls for Pulsed RF Displays
Pulsed RF Shared Measurement Settings . .... ..... .... . .... . .... . .... ..... .... . .... . .... ..... ..... .... . . 257
Audio Analysis
Overview ......................................................................................................... 269
Audio Spectrum
Audio Spectrum Display ................................................................................... 269
Audio Spectrum Settings..... .... . .... . .... ..... .... . .... . .... . .... .... . .... . .... ..... ... . . .... . .... . .... .. 270
Audio Summary
Audio Summary Display................... ................................ ................................ 271
Audio Summary Settings . .... . .... ..... ..... .... . .... . .... ..... ..... .... . .... . .... ..... ..... .... . .... . .... 272
iv SPECMON3 & SPECMON6 Printable Help
Common Controls for Audio Analysis Displays
Audio Analysis Measurement Settings ................................................................... 272
GP Digital Modulation
Overview ......................................................................................................... 283
Constellation
Constellation Display....................................................................................... 284
Constellation Settings .... .... . .... . .... ... . . .... . .... . .... ... . . .... . .... ..... .... . .... . .... ... . . .... . .... .. 285
Demod I & Q vs Time
Demod I & Q vs Time Display............................................................................ 286
Demod I & Q vs Time Settings ........................................................................... 288
EVM vs Time
EVM vs Time Display...... .................................. ................................ .............. 288
EVM vs Time Settings . .... ..... ... . . .... . .... . .... .... . .... . .... . .... ..... .... . .... . .... ..... ..... .... . ... 289
Eye Diagram
Eye Diagram Display........................... .................................. .......................... 290
Eye Diagram Settings .... . .... . .... . .... . .... . .... . .... . .... . .... . .... . .... ..... . .... ..... ..... ... . . ... . . .. 291
Frequency Deviation vs Time
Frequency Deviation vs Time Display ................................................................... 292
Frequency Deviation vs Time Settings . . .... . .... . .... . .... ... . . .... . .... . .... . .... . .... . .... ..... ..... .. 294
Magnitude Error vs Time
Magnitude Error vs Time Display .................................... ................................ .... 294
Magnitude Error vs Time Settings .... ................................ ................................ .... 296
Phase Error vs Time
Phase Error vs Time Display .......... ................................ ................................ .... 296
Phase Error vs. Time Settings ... .... . .... . .... . .... . .... ..... ..... .... . .... . .... . .... . .... . .... . .... ..... . 298
Signal Quality
Signal Quality Display ................. ................................ .................................. .. 298
Signal Quality Settings .... . .... . .... . .... ... . . .... . .... . .... . .... . .... ..... .... . .... . .... . .... . .... . .... ... 303
Symbol Table
Symbol Table Display.... ................................ ................................ .................. 304
Symbol Table Settings. .... . .... . .... . .... . .... . .... ..... . .... ..... . .... ..... ..... ..... ..... .... . ..... .... . . 305
Trellis Diagram
Trellis Diagram Display.. . .... . .... ..... ... . . .... . .... . .... .... . .... . .... ..... ... . . .... . .... . .... .... . .... . 305
Trellis Diagram Settings ... . . .... . .... ... . . .... . .... .... . .... . .... ... . . .... . .... .... . .... . .... ... . . .... . ... 307
Common Controls for GP Digital Modulation Displays
GP Digital Modulation Shared Measurement Settings ................................................. 307
Standard Settings Button................................... ................................ ................ 308
Symbol Maps
Symbol Maps................ ................................ ................................ ................ 324
User Filters
Overview: User Defined Measurement and Reference Filters. .... . .... . .... . .... ..... .... . .... . .... .. 329
Table of Contents
SPECMON3 & SPECMON6 Printable Help v
Table of Contents
User Filter File Format ... .... . .... . .... . .... . .... .... . .... . .... . .... ..... .... . .... . .... . .... ..... .... . .... . 330
Marker Measurements
Using Markers
Using Markers............................................................................................... 333
Controlling Markers with the Touchscreen Actions Menu .... . .... . .... ..... .... . .... . .... ..... ... . . .. 333
Measuring Signal Density, Frequency and Power on a DPX Bitmap Trace.......................... 334
Measuring Frequency and Power in the Spectrum Display .......... ................................ .. 336
Common Marker Actions
Marker Action Controls ....... ................................ .................................. ...... 337
Peak................................ ................................ .................................. .... 337
Next Peak ............................................................................................... 337
Marker to Center Frequency.......................................................................... 337
Define Markers Control Panel
Enabling Markers and Setting Marker Properties .. . . .... . .... . .... ..... ..... .... . .... . .... ..... ... 337
Markers Toolbar
Using the Markers Toolbar............................ ................................ ................ 339
Noise Markers in the Spectrum Display
Using Noise Markers in the Spectrum Display......... .................................. .......... 340
Search (Limits Testing)
The Search Tool (Limits Testing).............. ................................ ................................ 343
Search (Limits Te
Define Tab (Search) ....... ................................ ................................ ...................... 343
Actions Tab......................... .................................. ................................ ............ 347
sting) Settings .... . .... ..... ..... .... . .... . .... . .... . .... ..... ..... .... . .... . .... . .... . .... . . 343
Analyzing Data
Analysis Settings
Analysis Settings.. .... . .... . .... ..... .... . .... . .... . .... .... . .... . .... ... . . .... . .... ..... ... . . .... . .... ..... 349
Analysis Time Tab.......................................................................................... 349
Spectrum Time Tab............. .................................. ................................ .......... 351
Frequency Tab............................................................................................... 351
Units Tab............................. ................................ .................................. ...... 355
Analyzing Data Using Replay
Replay Overview ........................................................................................... 355
Replay Menu .............................. .................................. ................................ 357
Acq Data......................... ................................ ................................ ............ 358
DPX Spectra................................................................................................. 358
Replay All Selected Records .......................... .................................. .................. 358
Replay Current Record..................................................................................... 359
Replay from Selected....................................................................................... 359
Pause ............. ................................ .................................. .......................... 359
vi SPECMON3 & SPECMON6 Printable Help
Stop........................................................................................................... 359
Select All .................................................................................................... 359
Select Records from History............................................................................... 359
Replay Toolbar .............................................................................................. 360
Amplitude Corrections
Amplitude Settings . . .... ..... ... . . .... . .... . .... . .... . .... ... . . .... . .... . .... . .... . .... ..... .... . .... . .... . .... . 363
Internal Settings Tab . . .... . .... ... . . .... . .... ... . . .... . .... ... . . .... . .... ... . . .... . .... ... . . .... . .... ... . . .... . . 363
External Gain/Loss Correction Tab............................ ................................ ................ 366
External Gain Value ........................................................................................ 367
Apply External Corrections To.................. .................................. ........................ 367
External Loss Tables ....................................................................................... 368
External Probe Correction Tab................................................................................. 370
Controlling the Acquisition of Data
Acquis
Acquisition Controls in the Acquire Control Panel
UsingTriggerstoCaptureJustWhatYouWant
ition Controls in the Run Menu
Continuous Versus Single Sequence............................ ................................ .......... 371
Run ................. ................................ ................................ .......................... 371
Resume....................................................................................................... 371
Abort ............. ................................ .................................. .......................... 371
The Acquire Control Panel ............................ ................................ .................... 372
Sampling Parameters Tab.................. .................................. .............................. 372
Advanced Tab (Acquire)................................................................................... 374
FastSave ..................................................................................................... 375
FastSave Tab ................................................................................................ 377
Table of Contents
Managing Data, Settings, and Pictures
Saving and Recalling Data, Settings, and Pictures. . . .... . .... ..... .... . .... . .... .... . .... . .... ... . . .... . .... 379
Data, Settings, and Picture File Formats .... . .... . .... .... . .... . .... ..... .... . .... . .... ..... .... . .... . .... .... 381
Printing Screen Shots ..................... ................................ ................................ ...... 385
Reference
Online Help .................. .................................. ................................ .................. 387
About the Tektronix RTSA ..................................................................................... 387
Connecting Signals
Configure In/Out Settings.. . .... ... . . .... ..... .... . .... ..... .... . .... ..... .... . .... ..... .... . .... ... . . .... . 388
Connecting an RF Signal .................................................................................. 388
Connecting a Signal Using a TekConnect Probe .............. .................................. ........ 390
Connecting External Trigger Signals... .................................. ................................ 390
Digital I/Q Output ........ ................................ .................................. ................ 391
SPECMON3 & SPECMON6 Printable Help vii
Table of Contents
IQ Outputs ..................... ................................ ................................ .............. 391
Other Outputs ............................................................................................... 392
Mapping Measurements
Mapping Measurements.......................... ................................ .......................... 392
Menus
Menu Overview............................................................................................. 393
File Menu
View Menu
Run Menu
Replay
Markers Menu
Setup Menu
Tools Menu
Window Menu
Help Menu
Troubleshooting
Error and Information Messages ............ ................................ .............................. 405
Displaying the Windows Event Viewer .................................................................. 411
Dealing with Sluggish Instrument Operation............................................................ 413
On/Standby Switch
On/Standby Switch ....................... ................................ ................................ .. 413
Upgrading the Instrument Software
How to Find Out If Instrument Software Upgrades Are Available.................................... 414
Changing Settings
Settings. .... . .... . .... . .... . .... . ..... .... . ..... ... . . ..... ..... ..... ..... ..... ..... ..... ..... . .... ..... . .... .. 414
File Menu ............................................................................................... 394
More Presets............................................................................................ 398
View Menu ............................................................................................. 398
Run Menu......................................... ................................ ...................... 400
Replay Menu ........................................................................................... 401
Markers Menu .......................................................................................... 401
Setup Menu................. ................................ ................................ ............ 401
Tools Menu ....................... ................................ ................................ ...... 402
Arranging Displays .................................................................................... 404
Help Menu .......... ................................ .................................. .................. 405
Glossary
Index
viii SPECMON3 & SPECMON6 Printable Help
Welc ome Welc ome
Welcome
This help provides in-depth information on how to use the SPECMON3 and SPECMON6 Real-Time
Spectrum Analyzers. This help contains the m ost complete descriptions of how to use the analyzer. For
ashorterint
SPECMON6 Series Real-Time Signal Analyzer Quick Start User Manual. To see tutorial examples of how
to use your analyzer to take measurements in different application areas, refer to the SPECMON3 Real
Time Spectrum Analyzer and SPECMON6 Real-Time Spectrum Analyzer Application Examples Reference.
roduction to the Signal Analyzer, refer to the SPECMON3 Real Time Signal Analyzer and
SPECMON3 & SPECMON6 Printable Help 1
Welc ome Welcome
2 SPECMON3 & SPECMON6 Printable Help
About Tektronix Analyzers Your Tektronix Analyzer
Your Tektronix Analyzer
The SPECMON3 and SPECMON6 Analyzers will help you troubleshoot the toughest transient
interference issues by eliminating the guess work when using conventional instrument. Built-in mapping
supports bot
live color view of signal transients changing over time in the frequency domain, giving you immediate
confidence in the stability of your design, or instantly displaying a fault when it occurs. This live display
of transients is impossible with other signal analyzers. Once a problem is discovered with DPX, the
Tektronix Analyzers can be s et to trigger on the event, capture a continuous time record of changing RF
events and perform time-correlated analysis in all domains. You get the functionality of a wideband vector
signal ana
Analyzer – all in a single package.
Discover
DPX Minimum Event Time Capture: 3.7 μs (Option 110), 3.7 μs (Option 85), 3.9 μs (Option 40),
4 μs (standard).
h manual and automatic “drive test”. The revolutionary DPX display offers an intuitive
lyzer, a spectrum analyzer and the unique trigger-capture-analyze capability of a Real-Time
Trigger
Patented DPX Density Trigger (Option 200), Frequency Mask Trigger (Option 52) and advanced
triggering allows signal capturing with as short as 3.7 μs in frequency domain and 9.1 ns in time
in, best in its class
doma
Capture
All signals within a 110 MHz b andwidth span arecapturedintomemory(Option110only,85MHz
acquisition bandwidth with Option 85, 40 MHz acquisition bandwidth with Option 40, and 25 MHz
standard)
Analyze
Extensive time-correlated m ulti-domain displays connect problems in time, frequency, phase and
amplitude for quicker understanding of cause a nd effect when troubleshooting.
Power measurements and signal statistics help you characterize components and systems: ACLR,
Multi-Carrier ACLR, Power vs. Time, CCDF, Phase Noise, and Spurious.
SPECMON3 & SPECMON6 Printable Help 3
About Tektronix Analyzers Product Software
Advanced Measurement Suite (Option 20): Pulse measurements including rise time, pulse width, duty,
ripple, power, frequency and phase provide deep insight into pulse train behavior.
General Purpose Digital Modulation Analysis (Option 21): Provides vector signal analyzer
functionality.
Product Software
The instrument includes the following software:
SPECMON System Software: The SPECMON product software runs on Windows 7. As with
standard Windows 7 installations, you can install other compatible applications, but the installation
and use of non-Tektronix software is not supported by Tektronix. If you need to reinstall the operating
system, f
Real-Time Spectrum Analyzer and SPECMON6 Real-Time Spectrum Analyzer Quick Start User
Manual (Tektronix part number 071-3064-XX, English). You can download a PDF version of the
Quick Start User Manual at www.tektronix.com/manuals
that is not specifically provided by Tektronix for use with your instrument.
ollow the procedure in the Restoring the Operating System chapter in the SPECMON3
. Do not substitute any version of Windows
Product Software: The product software is the instrument application. It provides the user interface
(UI) and all other instrument control functions. You can minimize or even exit/restart the instrument
application as your needs dictate.
Occasionally new versions of software for your instrument may become available at our Web site. Visit
www.tektronix.com/software
Software and Hardware Upgrades
tronix may offer software or hardware upgrade kits for this instrument. Contact your local Tektronix
Tek
distributor or sales office for more information.
Standard Accessories
The standard accessories for the RSA6100B Series and RSA5100A Series instruments are shown below.
or the latest information on available accessories, see the Tektronix Web site
F
Quick Start User Manual
English - Option L0, Tektronix part number 071-3064-XX
Japanese - Option L5, Tektronix part number 071-3068-XX
for information.
.
Russian, Option L10, Tektronix part number 071-3070-XX
Simplified Chinese - Option L7, Tektronix part number 071-3066-XX
4 SPECMON3 & SPECMON6 Printable Help
About Tektronix Analyzers Standard Accessories
Applications Instructions
English – Tektronix part number 071-3065-XX
Simplified Chinese - Option L7, Tektronix part number 071-3067-XX
Japanese - Option L5, Tektronix part number 071-3069-XX
Russian, Option L10, Tektronix part number 071-3071-XX
Product Documentation CD-ROM
The Product Documentation CD-ROM contains PDF versions of all printed manuals. The Product
Documentation CD-ROM also contains the following manuals, some of which are available only in
PDF format:
SPECMON3 Real-Time Spectrum Analyzer and SPECMON6 Real-Time Spectrum Analyzer
Declassification and Security Instructions manual PDF, Tektronix part number 077-0754-XX
RSA5100A Series and SPECMON Series Service Manual PDF, Tektronix part number 077-0755-XX
SPECMON3 Real-Time Spectrum Analyzer and SPECMON6 Real-Time Spectrum Analyzer
Programmer Manual PDF, Tektronix part number 077-0741-XX
SPECMON3 Real-Time Spectrum Analyzer and SPECMON6 Real-Time Spectrum Analyzer
Specifications and Performance Verification PDF, Tektronix part number 077-0742-XX
Other related materials
NOTE. To check for updates to the instrument documentation, browse to www.tektronix.com/manuals
and search by your instrument's model number.
Important Documents Folder
Certificate of Calibration documenting NIST traceability, 2540-1 compliance, and ISO9001 registration
Power Cords
North America - Option A0, Tektronix part number 161-0104-00)
Universal Euro - Option A1, Tektronix part number 161-0104-06
United Kingdom - Option A2, Tektronix part number 161-0104-07
Australia - Option A3, Tektronix part number 161-0104-05
240V North America - Option A4, Tektronix part number 161-0104-08
Switzerland - Option A5, Tektronix part number 161
Japan - Option A6, Tektronix part number 161-A005-00
China - Option A10, Tektronix part number 161-0306-00
SPECMON3 & SPECMON6 Printable Help 5
-0167-00
About Tektronix Analyzers Recommended Accessories
India - Option A11, Tektronix part number 161-0324-00
No power cord or AC adapter - Option A99
Optical Wheel Mouse
Product Software CD
Recommend
The recomm
the latest information on available accessories, see the Tektro nix Web si te
Item
Additional Removable Hard Drive (Windows 7 and
instrument software installed)
Transit Case
Rackmount Installation Kit
Additional Quick Start User Manual (paper)
Additional Documents CD (all manuals in PDF format)
xxx
ed Accessories
ended accessories for the SPECMON Series instruments are shown in the following table. For
.
Ordering part number
065-0924-00
016-2026-XX
RSA56KR
071-3064-XX
063-4468-XX
6 SPECMON3 & SPECMON6 Printable Help
About Tektronix Analyzers Options
Options
To view a listing of the software options installed on your instrument, select Help > About Your
Tektronix Real-Time Analyzer. There is a label on the rear-panel of the instrument that lists installed
hardware opt
Options can be added to your instrument. For the latest information on available option upgrades, see
the Tektron
ions.
ix Web site
.
Documentation
In addition to the help, the following documents are available:
Quick Start User Manual (071-3064-XX - English). The Quick Start User Manual has information
about installing a nd operating your instrument. The Quick Start User Manual is also available in
Simplified Chinese (071-3066-XX), Japanese (071-3068-XX), and Russian (071-3070-XX).
Application Examples Reference (071-3065-XX). The Application Examples R eference provides
examples of specific application problems and how to solve those problems u sing a SPECMON
Signal Analyzer. The Application Examples Reference is also available in Simplified Chinese
Series
(071-3067-XX), Japanese (071-3069-XX), and Russian (071-3071-XX).
Progra
which is located on the Documents CD. See the Documents CD-ROM for installation information.
Servi
provided as a printable PDF file, which is located on the Documents CD. See the Documents CD-ROM
for installation information. The Service manual includes procedures to service the instrument to the
module level and restore the operating system.
Specifications and Performance Verification Technical Reference Manual (SPECMON Series:
077-0742-XX). This is a PDF-only manual that includes both the specifications and the performance
verification procedure. It is located on the Documents CD.
Declassification and Security Instructions (SPECMON Series: 077-0754-XX) This document helps
customers with data security concerns to sanitize or remove memory devices from the instrument.
It is located on the Documents CD.
The most recent versions of the product documentation, in PDF format, can be downloaded from
www.tektronix.com/manuals
mmer Manual (077-0741-XX). The Programmer Manual is provided as a printable PDF file,
ce Manual (RSA5100A Series and SPECMON Series: 077-0755-XX). The Service manual is
. You can find the manuals by searching on the product name.
Other Documentation
Your instrument includes supplemental information on CD-ROM:
Documents CD (Tektronix part number 063-4468-XX)
SPECMON3 & SPECMON6 Printable Help 7
About Tektronix Analyzers Documentation
8 SPECMON3 & SPECMON6 Printable Help
Orientation Front Panel Connectors
Front Panel Connectors
Fron
Item
1
2TrigIn
3
4
5
xxx
Connector
Trig Out Trigger output connector. 50 Ω, BNC, High > 2.0 V, Low < 0.4 V, (output
USB 2.0 USB 2.0 connector.
USB 2.0 USB 2.0 connector.
RF Input
t-Panel Controls
Descripti
current 1 mA).
External Trigger input connector, –2.5 V to +2.5 V (user settable).
RF input connector 50 Ω.
on
SPECMON3 & SPECMON6 Printable Help 9
Orientation Front-Panel Controls
Reference
Item Function Menu Equivalent
1 Media DVD-RW or removable hard disk
drive.
2 Displays
Opens the Disp
lays dialog box
enabling you to select which
displays to open.
3
4 Trigger
Settings Opens/closes the Settings control
panel for th
Opens/clos
e selected display.
es the Trigger control
panel. On the RSA5100A Series,
this button lights when the trigger
mode is set
5
Acquire
Opens/cl
to Triggered.
oses the Acquire control
panel.
6 Analysis
Opens/closes the Analysis control
panel.
7
Freq Press to adjust the measurement
frequency.
8
Span (Spectrum)
Press to adjust the span or press
and hold to display the Freq & Span
l panel for the General Signal
contro
Viewing displays.
9Amplit
ude
Opens/closes the Amplitude control
panel.
10
BW (Spectrum)
Press to adjust the bandwidth or
press and hold to display the BW
rol panel for the General Signal
cont
Viewing displays.
xxx
Setup > Displa
ys
Setup > Settings
Setup > Trig
Setup > Ac
ger
quire
Setup > Analysis
Setup > Analysis > Frequency
Setup > Amplitude
10 SPECMON3 & SPECMON6 Printable Help
Orientation Front-Panel Controls
Reference
11
12
Item Function Menu Equivalent
Run/Stop Starts and sto
Peak (Markers
section)
Moves the active marker to the
maximum peak o
ps acquisitions.
f the trace in the
selected display. If markers are
turned off, the marker reference (MR)
t the maximum peak.
next marker. If markers
13
Select (Mar
section)
kers
will appear a
Selects the
are turned off, the MR marker (marker
reference) will appear.
14
Define (Markers
section)
Opens the Markers control panel.
If markers
are turned off, the MR
marker (reference) will appear.
15
Control knob Changes values in numeric and list
controls. Pressing the knob (clicking
it) is the
same as pressing the Enter
key on a keyboard.
16 Arrow ke
ys
Move the
Markers. TheUparrow
moves the selected marker to the
next highest peak. The down arrow
moves th
e selected marker to the
next lower peak value. The right and
left arrows move the selected marker
ext peak.
to the n
17
18
ment/decre-
Incre
ment keys
Delete, (Markers
Increments or decrements the
ted value
selec
es the selected marker
Delet
section)
19
Add, (Markers
ion)
sect
Add a marker to the selected trace
20 Replay Replays the current acquisition record
21
xxx
Single Sets the Run mode to Single
uence
Seq
Run > Start Run
Markers > Peak
>Stop
SPECMON3 & SPECMON6 Printable Help 11
Orientation Front-Panel Controls
Reference
Item Function Menu Equivalent
22 Keypad Enters values in numeric controls.
23 Enter
Completes data entry in controls.
Same as pressi
ng the Enter key on
an external keyboard.
xxx
Reference
24 Recall
25
26
Item Function Menu Equivalent
Opens the Recall dialog box.
Save Opens the Save As dialog box. File > Save As
Touch Screen Off Turns the touch screen on and off. It
is off when lighted.
27 Help Displays the help.
28 Applic
Sets the instrument to the selec ted
Application Preset values.
29 DPX
Sets the instrument to the selec ted
DPX Preset values.
30 User
Sets the instrument to the selec ted
User Preset values.
31 Preset
Returns the instrument to the default
or preset values.
xxx
File > R ecall
Help > Online Manual
Setup > More Presets > Application
Setup > More Presets > DPX
Setup > More Presets > User
Setup > Preset
12 SPECMON3 & SPECMON6 Printable Help
Orientation Touch Screen
Touch Screen
You can use touch to control the instrument in addition to the front-panel controls, mouse, or extended
keyboard. Generally, touch can be used anywhere that click is mentioned in this help.
To disable the touch screen, push the front-panel TouchScreenOffbutton. When the touch screen is off,
the button is lighted. You can still access the on-screen controls with a mouse or keyboard.
You can adjust the touch screen operation to your personal preferences. To adjust the touch screen settings,
from Windows, select Start > Control Panel > Touch Screen Calibrator.
NOTE. If th
need to use a mouse or keyboard to restore normal operation.
Touch-S
You can u
Touch-screen Actions menu.
e instrument is powered on in Windows Safe Mode, the touch screen is inoperative. You will
creen Actions
se the touch screen to change marker settings and how waveforms are displayed by using the
To use the Touch-screen Actions menu, touch the display in a graph area and hold for one second, then
remove your finger. You can also use a mouse to display the Touch-screen Action menu by clicking
the right mouse button.
SPECMON3 & SPECMON6 Printable Help 13
Orientation Touch-Screen Actions
Icon Menu Description
Select Selects markers and adjusts their position.
Span Zoom
CF Pan Adjusts the Center Frequency according to horizontal movement.
Zoom
Pan
-
-
-
-
-
-
xxx
ch-Screen Menu for Spurious Display
Tou
Reset Scale
Marker to peak
Next Peak
Add marker
Delete marker Removes the last added marker.
All markers off
Trigger On This Use to visually define trigger parameters in the DPX display
Zooms the graph area about the selected point. Touch the graph
display at a point of interest and drag to increase or decrease the
span about the point of interest. Span Zoom adjusts the span
control and can affect the acquisition bandwidth.
Adjusts horizontal and vertical scale of the graph. The first
direction with enough movement becomes the primary scale of
adjustment. Adjustment in the secondary direction does not occur
until a threshold of 30 pixels of movement is crossed.
Dragging to the left or down zooms out and displays a smaller
waveform (increases the scale value). Dragging to the right or up
zooms in and displays a larger waveform (decreases the scale
value).
Adjusts horizontal and vertical position of the waveform. The first
direction with enough movement becomes the primary direction of
movement. Movement in the secondary direction does not occur
until a threshold of 30 pixels of movement is crossed.
Returns the horizontal and vertical scale and position settings
to their default values.
Moves the selected marker to the highest peak. If no marker is
turned on, this control automatically adds a marker.
Moves the selected marker to the next peak. Choices are Next
left, Next right, Next lower (absolute), and Next higher (absolute).
Defines a new marker located at the horizontal center of the graph.
Removes all markers.
(present only in the DPX Spectrum display).
The Touch-screen actions menu in the Spurious display has some minor changes compared to the standard
rsion used in other displays.
ve
14 SPECMON3 & SPECMON6 Printable Help
Orientation Elements of the Display
Icon Menu Description
-
-
-
xxx
Single-range Changes the current multi-range display to a single range display.
The displayed range is the range in which you display the
touchscreen-actions menu. Selecting Single-range from the menu
is equivalent to selecting Single on the Settings > Parameters tab.
Multi-range
Marker -> Sel Spur
Changes the current single-range display to a multi-range display.
Selecting Multi-range from the menu is equivalent to selecting
Multi on the Settings > Parameters tab.
Moves the selected marker to the selected spur.
Elements of the Display
The main areas of the application window are shown in the following figure.
SPECMON3 & SPECMON6 Printable Help 15
Orientation Elements of the Display
Specific
elements of the display are shown in the following figure.
16 SPECMON3 & SPECMON6 Printable Help
Orientation Elements of the Display
SPECMON3 & SPECMON6 Printable Help 17
Orientation Elements of the Display
Ref
Setting
number
1 Displays
2Markers
3
Settings Opens the Settings control panel for the selected display. Each display has
4 Trigger
5
Acquire
6 Analysis
7
8
Frequenc
Reference Level Displays the reference level. To change the value, click the text and enter a
y
9 Amplitude
10 Repla
y
11 Ru n
12
13 Re
14
5
1
xxx
ck mark indicator
Che
call
Save Opens the Save As dialog in order to save setup files, pictures (screen
reset
P
Description
Opens the Select Displays dialog box so that you can select measurement
displays.
Opens or closes the Marker toolbar at the bottom of the window.
its own cont
Opens the Tr
Opens the A
Opens the
rol panel.
igger control panel so that you can define the trigger settings.
cquire control panel so that you can define the acquisition settings.
Analysis control panel so that you can define the analysis settings
such as frequency, analysis time, and units.
Displays the frequency at which measurements are made. For spectrum
displays, this is called “Center Frequency”. To change the value, click the
text and
use the front panel knob to dial in a frequency. You can also enter
a frequency with the front panel keypad or use the front panel up and down
buttons.
number
Opens
from the keypad or use the front panel up and down buttons.
the Amplitude control panel so that you can define the Reference Level,
configure internal attenuation, and enable/disable the (optional) Preamplifier.
new measurement cycle on the last acquisition data record using any
Runs a
new settings.
Starts and stops data acquisitions. When the instrument is acquiring data, the
button label has green lettering. When stopped, the label has black lettering.
an specify the run conditions in the Run menu. For example, if you
You c
select Single Sequence in the Run menu, when you click the Run button,
the instrument will run a single measurement cycle and stop. If you select
tinuous, the instrument will run continuously until you stop the acquisitions.
Con
check mark indicator in the upper, left-hand corner of the display indicates
The
the display for which the acquisition hardware is optimized.
Displays the Open window in order to recall setup files, acquisition data files,
or trace files.
aptures), acquisition data files, or export measurement settings or acquisition
c
data.
Recalls the Preset (Main)
(see page 402) preset.
18 SPECMON3 & SPECMON6 Printable Help