Tektronix SG5030 Specifications Sheet

The SG 5030 is the only choice for anyone
who needs leveled output amplitude to
calibrate analog or digital scopes with
bandwidth to 550 MHz — under either
local or programmable control. That’ s
because no other programmable leveled
sine wave generator is built specifically to
fill scope calibration requirements. The SG
5030’s leveled output is variable from 0.1
Hz to 550 MHz with a reference frequency
of 50 kHz. Crystal-controlled frequency
accuracy eliminates drift so there’ s no
second-guessing results.

Accurately calibrated output voltage is

provided from 4.5 mV to 5.5 V peak-to­peak into 50 Ω. Absolute amplitude accuracy
is ±1.5% from 0.1 Hz to 50 kHz, with
flatness from ±1.5 to ±4% over the
remainder of the frequency range to
550 MHz.

Aremote leveling head is standard and
plugs directly into the oscilloscope to
ensure that the output signal is level at all
times. All other signal generators are
spec’d at the front-panel BNC connector,
not at the end of the cable going to the
instrument under test.

Easy test setup — either locally or
over the GPIB

The SG 5030’s front panel is simple to
operate, providing complete status and error
information through a bright, 8-digit
display. To simplify manual use and reduce
bus traffic in ATE applications, you can
store up to 20 front-panel settings in non­volatile memory.

Frequency and amplitude along with
front-panel store/recall settings are all fully
programmable. Automating test procedures
makes scope calibration some four times
faster than manual test methods allow — and
virtually eliminates the risk of operator error .

Configure the SG 5030 with a
CG 5011 Programmable Calibration
Generator

As three-wide TM 5000 Series modules,
they conveniently fill a six-slot TM 5006A
mainframe to form a complete, cost-effective
benchtop or rackmount calibration system.

Finally, count on TEGAM to offer more
support of your purchase, including
comprehensive manuals, applications
assistance, updates and a worldwide
service network.

SG 5030 Pro grammab le Leveled
Sine Wa ve Generator for Scope
Calibration

• 0.1 Hz to 550 MHz frequency range
with a reference frequency of 50 kHz

• 4.5 mV to 5.5 V amplitude range

• Amplitude flatness from ±1.5 to ±4%
of 50 kHz reference

• Synthesized frequency accurac y

• Excellent VSWR

• 20 stored front-panel settings
capability with non-volatile memory

• Self-test on power-up

• Easy integration into GPIB systems

• Companion to CG 5011
Programmable Calibration Generator

MODULAR TEST INSTRUMENTS

TM 500 / 5000

THE GLOBAL SOURCE FOR PROVENTEST

AND MEASUREMENT TECHNOLOGY.

Prices and specifications subject to change without notice.

SG 5030 Specifications

Frequency

Range/Resolution

0.1 Hz - 4.9999 kHz 0.1 Hz step
5 kHz - 49.999 kHz 1 Hz step
50 kHz - 550 MHz 10 Hz steps

Accuracy With Internal Timebase
(within 1 year of adjustment)

ppm of Setting + Hz

0.1 Hz - 4.9999 kHz ±(3 + 0.06)
5 kHz - 49.999 kHz ±(3 + 0.3)
50 kHz - 550 MHz ±(3 + 3)

Accuracy With External Timebase
(10 MHz)

0.1 Hz - 4.9999 kHz ±(ext. t.b. error
+ 0.06 Hz)

5 kHz - 49.999 kHz ±(ext. t.b. error

+ 0.3 Hz)

50 kHz - 550 MHz ±(ext. t.b. error

+ 3 Hz)

Amplitude

Range/Resolution

4.5 mV - 55 mV 0.02 mV/step

55.2 mV - 550 mV 0.2 mV/step

552 mV - 5.5 V 2 mV/step

-42.95 dBm -

+18.75 dBm 0.05 dBm/step

Accuracy (within 1 year of adjustment)

0.1 Hz - 50 kHz ±1.5% of setting

Flatness (within 1 year of adjustment)

% of 50 kHz Ref. Freq.
50 kHz - 100 MHz ±1.5%
100 MHz - 250 MHz ±3%
250 MHz - 550 MHz ±4%

Output

Leveling Settling Time Less than 20 ms
Source Resistance 50 Ω, ±1%
DC Offset ±20 mV
VSWR Less than 1.2:1

up to 550 MHz

Harmonic Distortion

0.1 Hz - All Harmonics

49.999 kHz and Spurs less

than -50 dBc

50 kHz- 2nd Harmonic
550 MHz less than -30 dBc

All others
less than -35 dBc
Nonharmonics
less than -40 dBc
Phase noise
less than -85
dBc/Hz at 10
kHz offset

Internal Timebase Output

Frequency 10 MHz
Accuracy ±3 ppm
Amplitude 400 mV p-p

into 50 Ω

Impedance 50 Ω

External Timebase Input

Frequency -10 MHz,

±1.5 ppm

Amplitude l0dBm to

+10dBm (70
to 700 mV rms)

Impedance 50 Ωac,

500 Ω dc

Environmental

Temperature

Operating 0°C to 40°C
Non-operating -40 ° C t o + 71 ° C

Humidity

Operating 95% ±5% RH,

+ 10°C to +30°C
75% ±5% RH,
+30°C to +40°C
RH not controlled
below + 10°C

General

W eight 6.5 lb. (2.4 kg)
Height 5" (12.7 cm)
Width 8" (20.32 cm)
Length 11" (27.94 cm)

MODULAR TEST INSTRUMENTS

TM 500 / 5000

Ordering Information

SG 5030 Prgm. Leveled Sine Wave

Generator
Includes: Operators Manual (070-7705-01),
Instrument Interfacing Guide (070-7704-00),
Reference Guide (070-7706-00), Leveling
Head (015-2350-01).

TM 5003 3 Wide Power Module

Mainframe, GPIB
TM 5003/RI TM 5003 w/Rear Interface

TM 5006A 6 Wide Power Module

Mainframe, GPIB
TM 5006A/R TM 5006A w/Rack Mount
TM 5006A/RI TM 5006Aw/Rear Interface
TM 5006A/R/RI TM 5006A w/Rack Mt &

Rear Interface
TM 5006A/EMC TM 5006A w/EMC Shielding

Mainframe Power Plug Options

Standard 120V North American
UE220 220V Universal Euro

& Switzerland
UK240 240V United Kingdom
A240 240VAustralian
NA240 240V North American
S220 220VSwitzerland

Warranty

One year on materials and workmanship.

Calibration Documentation

Contact TEGAM for OPTION Z540 NIST
Traceable Compliance Certificate and
Test Data.

Calibration & T echnical Services

For warranty and remedial repair, calibration
services and spare parts, or for additional
information on TEGAM sales and service
offices around the world, contact us at
440-466-6100 (ph) or 440-466-6110 (fx).

SG5030.991PG

THE GLOBAL SOURCE FOR PROVENTEST

AND MEASUREMENT TECHNOLOGY.

TEN TEGAM WAY • GENEVA,OHIO 44041

440-466-6100 • FAX [phone]

www.tegam.com • e-mail:[e-mail]