Tektronix RSA6106A, RSA6114A, RSA6120A, RSA5103A, RSA5106A Online Help

...
xx
RSA6100B Series Real-Time Signal Analyzers
ZZZ
RSA5100A Series Real-Time Signal Analyzers
Printable Help
*P077051903*
077-0519-03
RSA6100B Series Real-Time Signal Analyzers RSA5100A Series Real-Time Signal Analyzers
ZZZ
Printable Help
077-0519-03
Copyright © Tektronix. All rights reserved. Licensed software products are owned by Tektronix or its subsidiaries or suppliers, and are protected by national copyright laws and international treaty provisions.
Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all previously published material. Specications and p rice change privileges reserved.
TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.
Online help version: 2.7
Contactin
Tektronix, Inc. 14150 SW Karl Braun Drive P. O . B o x 5 0 0 Beaverton, OR 97077 USA
For product information, sales, service, and technical support:
g Tektronix
In North America, call 1-800-833-9200. Worldwide, visit www.tektronix.com to nd contacts in your area.
Table of Contents
Welcome
Welcome............................................................................................................. 1
About Tektronix Analyzers
Your Tektronix Analyzer........................................................................................... 3
Product Description ......... ................................ .................................. ..................... 4
Product Software ...................... ................................ .................................. ........... 5
Accessories
Standard Accessories.......................................................................................... 5
Recommended Accessories................................................................................... 7
Options
Options.......................................................................................................... 8
Documentation and Support
Documentation................................................................................................. 8
Table of Contents
Orientation
Front Panel Connectors ........................... ................................ ................................ 11
Connecting Signals and Selecting the Analysis Channel...................................................... 11
Front-Panel Controls ................................ ................................ .............................. 12
Front-Panel Controls ................................ ................................ .............................. 15
Touch Screen............................. .................................. ................................ ........ 15
Touch-Screen Actions............................................................................................. 15
Elements of the Display........................................................................................... 19
Rear-Panel Connectors............................................ ................................ ................ 23
Setting Up Network Connections . . .... .... . .... . .... ..... ... . . .... . .... . .... .... . .... . .... ..... ... . . .... . .... . .. 23
Operating Your Instrument
Restoring Default Settings.............................. ................................ .......................... 25
Running Alignments ........ .................................. ................................ .................... 25
Presets. ................................ ................................ .................................. ............ 26
Setting Options. . .... . .... .... . .... . .... . .... . .... .... . .... . .... . .... . .... .... . .... . .... . .... . .... .... . .... . .... . ... 32
Using the Measurement Displays
Selecting Displays ............. .................................. ................................ .................. 37
Taking Measurements
Measurements
Available Measurements ........... ................................ .................................. ........ 39
RSA6100B Series & RSA5100A Series Printable Help i
Table of Contents
GeneralSignalViewing
Overview ........................................................................................................... 45
DPX
DPX Primer ................................. ................................ ................................ .. 45
DPX Display Overview ........ ................................ .................................. ............ 68
DPX Display .................... ................................ .................................. ............ 68
DPX Settings .... .... . .... . .... . .... . .... ..... ..... .... . .... . .... . .... . .... ... . . .... . .... . .... . .... ..... ..... .. 77
Time Overview
Time Overview Display...................................................................................... 95
Time Overview Settings ..................................................................................... 97
Spectrum
Spectrum Display................. ................................ .................................. ........ 101
Spectrum Settings.. . .... ..... .... . .... . .... . .... .... . .... . .... ..... ... . . .... . .... . .... .... . .... . .... ..... ... 102
Spectrogram
Spectrogram Display ................. ................................ ................................ ...... 104
Spectrogram Settings . . .... ..... .... . .... . .... . .... . .... ... . . .... . .... . .... . .... ... . . .... . .... . .... . .... .... 106
Amplitude Vs Time
Amplitude Vs Time Display. ................................ .................................. ............ 110
Amplitude Vs Time Settings .......................... ................................ .................... 111
Frequency Vs Time
Frequency Vs Time Display............................................................................... 112
Frequency Vs Time Settings... .... . .... . .... . .... . .... . .... . .... . .... . .... . .... . .... ..... . .... ..... ..... .. 113
Phase Vs Time
Phase Vs Time Display..................................................................................... 114
Phase Vs Time Settings . . .... .... . .... . .... ..... ... . . .... . .... . .... .... . .... . .... ..... ... . . .... . .... . .... .. 115
RF I & Q Vs Time
RF I & Q vs Time Display................................................................................. 116
RF I & Q vs Time Settings..... ..... ..... ..... ..... .... . ..... .... . .... . .... . .... . .... . .... . .... . .... . .... . . 117
Common Controls for General Signal Viewing Displays
General Signal Viewing Shared Measurement Settings .... . .... ..... .... . .... ..... .... . .... . .... .... . . 118
Analog Modulation
Overview ......................................................................................................... 131
AM
AM Display ....................... ................................ .................................. ........ 131
AM Settings ................................................................................................. 132
FM
FM Display .................................................................................................. 138
FM Settings.. . .... . .... ..... ..... .... . .... . .... ..... .... . .... . .... . .... .... . .... . .... . .... ..... .... . .... . .... 140
PM
PM Display .................................................................................................. 146
PM Settings.. . .... . .... ..... ..... .... . .... . .... ..... .... . .... . .... . .... .... . .... . .... . .... ..... .... . .... . .... 148
ii RSA6100B Series & RSA5100A Series Printable Help
RF Measurements
Overview ......................................................................................................... 155
Channel Power and ACPR
Channel Power and A CPR (Adjacent Channel Power Ratio) Displ
Channel Power and ACPR Settings ...................... ................................ ................ 158
MCPR
MCPR (Multiple Carrier Power Ratio) Display . . . .... . .... ... . . .... . .... ..... .... . .... . .... .... . .... . .. 161
MCPR Settings............ ................................ .................................. ................ 164
Occupied BW & x dB BW
Occupied BW & x dB BW Display............. .................................. ........................ 169
Occupied BW & x dB BW Settings ............ ................................ .......................... 172
Spurious
Spurious Display............................................................................................ 173
Spurious Display Settings. ... . . .... . .... . .... . .... . .... ..... ..... .... . .... . .... . .... . .... . .... . .... ..... ... 177
CCDF
CCDF Display............................................................................................... 185
CCDF Settings ... . .... . .... ... . . .... . .... ..... .... . .... . .... .... . .... . .... .... . .... . .... .... . .... . .... ... . . . 186
Phase Noise
Phase Noise Display........................................................................................ 187
Phase Noise Settings . . .... . .... . .... . .... ..... ..... .... . .... . .... . .... . .... . .... . .... ..... ..... .... . .... . .. 191
Settling Time Measurements
Settling Time Measurement Overview .... . .... ..... ... . . .... . .... . .... .... . .... . .... ..... ... . . .... . .... . 194
Settling Time Displays
Settling Time Displays . .... . .... . .... . .... . .... .... . .... . .... . .... ..... .... . .... . .... . .... ..... .... . .... . .. 199
Settling Time Settings ... . .... ..... ..... ... . . .... . .... . .... . .... . .... . .... ..... ..... .... . .... . .... . .... . .... 206
Common Controls for Settling Time Displays
Settling Time Displays Shared Measurement Settings . .... . .... . .... ... . . .... . .... . .... . .... .... . .... . 206
SEM (Spectrum Emission Mask)
SEM Display ................................................................................................ 214
Spectrum Emission Mask Settings .... . .... . .... . .... ..... .... . .... . .... . .... . .... ... . . .... . .... . .... . .... 217
Common Controls for RF Measurements Displays
RF Measurements Shared Measurement Settings... . .... . .... ..... .... . .... . .... . .... .... . .... . .... . ... 224
Table of Contents
ay................................ 155
OFDM Analysis
Overview ......................................................................................................... 233
OFDM Chan Response
OFDM Channel Response Display ....................................................................... 233
OFDM Channel Response Settings ... . .... . .... ..... ..... .... . .... . .... . .... . .... . .... ..... .... . .... . .... 235
OFDM Constellation
OFDM Constellation Display ............................................................................. 236
OFDM Constellation Settings ... . .... . .... . .... . .... ..... ..... .... . ... . . .... . .... . .... . .... . .... . .... . .... 237
OFDM EVM
RSA6100B Series & RSA5100A Series Printable Help iii
Table of Contents
OFDM EVM Display ........................ .................................. ............................ 237
OFDM EVM Settings .... . .... . .... .... . .... . .... ..... ... . . .... . .... ..... .... . .... . .... ... . . .... . .... ..... . 238
OFDM Mag Error
OFDM Magnitude Error Display ......................................................................... 239
OFDM Magnitude Error Settings......................................................................... 240
OFDM Phase Error
OFDM Phase Error Disp
OFDM Phase Error Settings . . . .... . .... . .... .... . .... . .... . .... ..... .... . .... . .... ..... ... . . .... . .... . .... 242
OFDM Power
OFDM Power Display ..................................................................................... 243
OFDM Power Settings . .... .... . .... . .... . .... . .... .... . .... . .... . .... . .... .... . .... . .... . .... ..... .... . ... 244
OFDM Summary
OFDM Summary Display.................................... ................................ .............. 245
OFDM Summary Settings ................................................................................. 247
OFDM Symb Table
OFDM Symbol Table Display............................................................................. 248
OFDM Symbol Table Settings . ..... .... . .... . .... .... . .... . .... ... . . .... . .... ..... .... . .... . .... ..... .... 249
Common Controls for OFDM Analysis Displays
OFDM Analysis Shared Measurement Settings .... . .... . .... ..... .... . .... . .... . .... ..... .... . .... . .... 249
lay ......... ................................ .................................. .... 241
Pulsed RF
Overview ......................................................................................................... 257
Pulse Table Display
Pulse Table Display......................... ................................ ................................ 257
Pulse Table Settings .... ..... ... . . .... . .... . .... .... . .... . .... . .... ..... .... . .... . .... ..... ... . . .... . .... . .. 258
Pulse Trace Display
Pulse Trace Display........................................... .................................. ............ 259
Pulse Trace Settings .... ..... ..... .... . .... . .... ..... ..... .... . .... . .... ..... ... . . .... . .... . .... ..... .... . .. 261
Pulse Statistics
Pulse Statistics Display..................................................................................... 261
Pulse Statistics Settings ................................ ................................ .................... 263
Common Controls for Pulsed RF Displays
Pulsed RF Shared Measurement Settings . .... . .... ..... ... . . .... . .... . .... ... . . .... . .... . .... . .... .... . . 263
Audio Analysis
Overview ......................................................................................................... 275
Audio Spectrum
Audio Spectrum Display ................................................................................... 275
Audio Spectrum Settings. .... .... . .... . .... ..... ... . . .... . .... . .... .... . .... . .... ..... ... . . .... . .... . .... .. 276
Audio Summary
Audio Summary Display................... ................................ ................................ 277
Audio Summary Settings . .... . .... . .... ..... .... . .... . .... . .... ..... .... . .... . .... . .... ..... .... . .... . .... 278
iv RSA6100B Series & RSA5100A Series Printable Help
Common Controls for Audio Analysis Displays
Audio Analysis Measurement Settings................................................................... 279
GP Digital Modulation
Overview ......................................................................................................... 289
Constellation
Constellation Display....................................................................................... 290
Constellation Settings .... .... . .... . .... ..... ... . . .... . .... ..... .... . .... . .... .... . .... . .... ..... ... . . .... . . 291
Demod I & Q vs Time
Demod I & Q vs Time Display............................................................................ 292
Demod I & Q vs Time Settings ........................................................................... 294
EVM vs Time
EVM vs Time Display...... ................................ .................................. .............. 294
EVM vs Time Settings . .... . .... . .... .... . .... . .... . .... ..... .... . .... . .... ..... ..... .... . .... . .... ..... ... 295
Eye Diagram
Eye Diagram Display........................... ................................ ............................ 296
Eye Diagram Settings .... . ... . . .... . .... . .... . .... . .... . .... . .... . .... . .... . .... . .... ..... ..... ..... ..... .. 297
Frequency Deviation vs Time
Frequency Deviation vs Time Display ................................................................... 298
Frequency Deviation vs Time Settings . . .... . .... . .... . .... ..... ..... .... . .... . .... . .... . .... . .... . .... .. 300
Magnitude Error vs Time
Magnitude Error vs Time Display .................................. .................................. .... 300
Magnitude Error vs Time Settings .. ................................ .................................. .... 302
Phase Error vs Time
Phase Error vs Time Display ...... .................................. ................................ ...... 302
Phase Error vs. Time Settings ... . .... . .... ..... ..... .... . .... . .... . .... . .... . .... . .... ..... ..... .... . .... . 304
Signal Quality
Signal Quality Display ................. ................................ ................................ .... 304
Signal Quality Settings .... . .... . .... . .... ..... ..... .... . .... . .... . .... . .... ..... ..... .... . .... . .... . .... . .. 309
Symbol Table
Symbol Table Display.. .................................. ................................ .................. 310
Symbol Table Settings. .... . .... . ... . . .... . ..... .... . ..... ... . . ..... ..... ..... ..... ..... ..... ..... ..... . .... 311
Trellis Diagram
Trellis Diagram Display... ..... .... . .... . .... . .... ..... .... . .... . .... . .... . .... .... . .... . .... . .... . .... ... . 311
Trellis Diagram Settings . .... .... . .... . .... .... . .... . .... .... . .... . .... .... . .... . .... .... . .... . .... ... . . ... 313
Common Controls for GP Digital Modulation Displays
GP Digital Modulation Shared Measurement Settings ................................................. 313
Standard Settings Button........................................... .................................. ...... 314
Symbol Maps
Symbol Maps.............. ................................ .................................. ................ 330
User Filters
Overview: User Dened Measurement and Reference Filters. . .... ..... .... . .... . .... ... . . .... . .... . . 335
Table of Contents
RSA6100B Series & RSA5100A Series Printable Help v
Table of Contents
User Filter File Format ... ..... ..... .... . .... . .... ..... ..... .... . .... . .... ..... ..... .... . .... . .... ..... ..... 336
Marker Measurements
Using Markers
Using Markers............................................................................................... 339
Controlling Markers with the Touchscreen Actions Menu ..... .... . .... . .... ..... ... . . .... . .... . .... .. 340
Measuring Signal Density, Frequency and Power on a DPX Bitmap Trace.......................... 341
Measuring Frequency and Power in the Spectrum Display .......... ................................ .. 342
Common Marker Actions
Marker Action Controls ..... .................................. ................................ ........ 344
Peak................................ ................................ .................................. .... 344
Next Peak ............................................................................................... 344
Marker to Center Frequency.......................................................................... 344
Sync Scope C1/C2 to Active Marker ................................................................ 344
Define Markers Control Panel
Enabling Markers and Setting Marker Properties .... ... . . .... . .... . .... . .... ... . . .... . .... . .... . .. 345
Markers Toolbar
Using the Markers Toolbar.......................... ................................ .................. 346
Noise Markers in the Spectrum Display
Using Noise Markers in the Spectrum Display......... ................................ ............ 347
Search (Limits Testing)
The Search Tool (L
Search (Limits Testing) Settings ..... .... . .... . .... ..... ... . . .... . .... . .... .... . .... . .... . .... ..... .... . .... . .. 351
Dene Tab (Search) ....... ................................ ................................ ...................... 351
Actions Tab......................... .................................. ................................ ............ 356
imits Testing).. ................................ .................................. .......... 351
Analyzing Data
Analysis Settings
Analysis Settings.. ... . . .... . .... ..... .... . .... . .... . .... .... . .... . .... ... . . .... . .... ..... ... . . .... . .... ..... 357
Analysis Time Tab.......................................................................................... 357
Spectrum Time Tab........... .................................. ................................ ............ 359
Frequency Tab............................................................................................... 359
Units Tab............................. ................................ .................................. ...... 363
Analyzing Data Using Replay
Replay Overview ........................................................................................... 363
Replay Menu .............................. ................................ ................................ .. 366
Acq Data......................... ................................ ................................ ............ 366
DPX Spectra................................................................................................. 367
Replay All Selected Records ........................ ................................ ...................... 367
Replay Current Record..................................................................................... 367
Replay from Selected....................................................................................... 367
vi RSA6100B Series & RSA5100A Series Printable Help
Table of Contents
Pause ............. ................................ .................................. .......................... 367
Stop........................................................................................................... 367
Select All .................................................................................................... 368
Select Records from History............................................................................... 368
Replay Toolbar .............................................................................................. 368
Amplitude Correction
Amplitude Settings . . .... . .... ..... .... . .... . .... . .... . .... . .... ..... .... . .... . .... . .... . .... . .... ..... .... . .... . 371
Internal Settings Tab .. .... . .... . .... .... . .... . .... .... . .... . .... ... . . .... . .... ... . . .... . .... ... . . .... . .... ... . . . 371
External Gain/Loss Correction Tab.......................... ................................ .................. 375
External Gain Value ........................................................................................ 376
Apply External Corrections To.................. ................................ .......................... 376
Apply External Corrections To.................. ................................ .......................... 377
External Loss Tables ....................................................................................... 377
External Probe Correction Tab................................................................................. 379
s
Controlling the Acquisition of Data
Acquisition Controls in the Run Menu
Continuous Versus Single Sequence............................ ................................ .......... 381
Run ................. ................................ ................................ .......................... 381
Resume....................................................................................................... 381
Abort ............. ................................ .................................. .......................... 381
Acquisition Controls in the Acquire Control Panel
The Acquire Control Panel .......................... ................................ ...................... 382
Sampling Parameters Tab........ ................................ ................................ .......... 382
Advanced Tab (Acquire)................................................................................... 384
FastSave ..................................................................................................... 385
FastSave Tab ................................................................................................ 387
Acquire....................................................................................................... 388
Vertical ....................................................................................................... 388
IQ Sampling Parameters ................................................................................... 390
Scope Settings... . .... . .... . .... . .... ..... ..... .... . .... . .... . .... . .... ..... ..... .... . .... . .... . .... . .... .... 391
Scope Data Tab............ .................................. ................................ ................ 392
UsingTriggerstoCaptureJustWhatYouWant
Triggering
Triggering............................................................................................... 392
Frequency Mask Trigger .................. ................................ ............................ 396
Mask Editor (Frequency Mask Trigger) ........................... ................................ .. 396
Trigger Settings ............ .................................. ................................ .......... 399
Event Tab ............................................................................................... 400
Time Qualied Tab .................................................................................... 409
Advanced Tab (Triggering) ......... ................................ ................................ .. 410
RSA6100B Series & RSA5100A Series Printable Help vii
Table of Contents
Actions Tab (Triggering).............................................................................. 411
Managing Data, Settings, and Pictures
Saving and Recalling Data, Settings, and Pictures.... ..... ... . . .... . .... . .... . .... . .... . .... . .... . .... ..... . 413
Data, Settings, and Picture File Formats .... . .... . .... .... . .... . .... ... . . .... . .... ..... .... . .... . .... ..... .... 417
Printing Screen Shots ........................................................................................... 420
Reference
Online Help ...................................................................................................... 421
About the Tektronix RTSA..................................................................................... 421
About the Vector Signal Analysis Software ............ ................................ ...................... 422
Connecting Signals
Congure In/Out Settings.. . .... ..... .... . .... ..... .... . .... ... . . .... . .... .... . .... . .... .... . .... . .... .... . 423
Connecting an RF Signal .................................................................................. 423
Connecting a Signal Using a TekConnect Probe .. .................................. .................... 426
Connecting External Trigger Si
Digital I/Q Output ...... .................................. ................................ .................. 427
IQ Outputs ..................... ................................ ................................ .............. 427
Analog IF Output ........................................................................................... 428
Other Outputs ............................................................................................... 429
Menus
Menu Overview............................................................................................. 429
File Menu
File Menu ............................................................................................... 430
More Presets............................................................................................ 435
View Menu
View Menu ............................................................................................. 435
Run Menu
Run Menu......................................... ................................ ...................... 437
Replay
Replay Menu ........................................................................................... 438
Markers Menu
Markers Menu .......................................................................................... 438
Setup Menu
Setup Menu................. ................................ ................................ ............ 439
Tools Menu
Tools Menu ....................... ................................ ................................ ...... 440
Window Menu
Arranging Displays .................................................................................... 442
Help Menu
Help Menu............ ................................ ................................ .................. 442
Troubleshooting
gnals ..................................................................... 427
viii RSA6100B Series & RSA5100A Series Printable Help
On/Standby Switch
Upgrading the Instrument Software
Changing Settings
Glossary
Index
Table of Contents
Error and Information Messages.......................................................................... 443
Displaying the Windows Event Viewer .................................................................. 452
Dealing with S
On/Standby Switch ..................... .................................. ................................ .. 454
How to Find Out If Instrument Software Upgrades Are Available.................................... 455
Settings. .... . .... . .... . .... . .... . .... . .... ..... ..... .... . .... . .... . .... . .... . .... . .... . .... . .... ..... . .... .... 4
luggish Instrument Operation............................................................ 454
55
RSA6100B Series & RSA5100A Series Printable Help ix
Table of Contents
x RSA6100B Series & RSA5100A Series Printable Help
Welc ome Welc ome
Welcome
This help provides in-depth information on how to use the RSA6100B Series Real-Time Spectrum Analyzers and RSA5100A Series Real-Time Signal Analyzers. This help contains the most complete description the RSA6100B Series Real Time Signal Analyzer and RSA5100A Series Real-Time Signal Analyzer Quick Start User Manual. To see tutorial examples of how to use your analyzer to take measurements in different application areas, refer to the RSA6100B Series Real Time Signal Analyzer and RSA5100A Series Real-Time Signal Analyzer Application Examples Reference.
This help provides in-depth information on how to use the SignalVu™ Vector Signal Analysis Software. This help is also available in a PDF format for printing.
NOTE. Most of the screen illustrations in this document are taken from the vector signal analysis software version hardware-based functionality and buttons, such as Trig, that are not present in the SignalVu™ application.
s of how to use the analyzer. For a shorter introduction to the Signal Analyzer, refer to
that runs on the RSA5100A Real-time Signal Analyzers. These instruments support additional
RSA6100B Series & RSA5100A Series Printable Help 1
Welc ome Welcome
2 RSA6100B Series & RSA5100A Series Printable Help
About Tektronix Analyzers Your Tektronix Analyzer
Your Tektronix Analyzer
The RSA6100B Series and RSA5100A Series Analyzers will help you to easily discover design issues that other signal analyzers may miss. The revolutionary DPX display offers an intuitive live color view of signal transients c your design, or instantly displaying a fault when it occurs. This live display of transients is impossible with other signal analyzers. Once a problem is discovered with DPX, the Tektronix Analyzers can be set to trigger on the event, capture a continuous time record of changing RF events and perform time-correlated analysis in all domains. You get the functionality of a wideband vector signal analyzer, a spectrum analyzer and the unique trigger-capture-analyze capability of a Real-Time Analyzer – all in a single package.
Discover
hanging over time in the frequency domain, giving you immediate condence in the stability of
RSA6100B
RSA5000A Series: DPX Minimum Event Time Capture: 24 μs (option 85), 31 μs (option 40), 31 μs (standa
Series: DPX Minimum Event Time Capture: 3.9 μs (standard), 3.7 μs (option 110 ).
rd); 10.3 μs (option 85 + option 200), 24 μs (option 200).
Trigger
RSA6100B Series: Tektronix exclusive 40 MHz and 110 MHz DPX Density and Frequency Mask triggers (Option 02) offer easy event-based capture of transient RF signals by triggering on any change in the frequency domain.
RSA5000A Series: Tektronix exclusive 25 MHz, 40 MHz, and 85 MHz DPX Density and Frequency Mask triggers (Option 52) offer easy event-based c apture of transient RF signals by triggering on any change in the frequency domain.
ture
Cap
RSA6100B Series: All signals within a 110 MHz bandwidth span are captured into memory (Option
0 only, 40 MHz acquisition bandwidth standard).
11
RSA5000A Series: All signals within a 85 MHz bandwidth span are captured into memory (Option 85
nly, 40 MHz acquisition bandwidth with Option 40, and 25 MHz standard).
o
RSA6100B Series: Up to 7 seconds acquisition length at 110 MHz bandwidth provides complete analysis over time without making multiple acquisitions.
RSA5100A Series: Up to 7 seconds acquisition length at 85 MHz bandwidth provides complete analysis over time without making multiple acquisitions.
RSA6100B Series & RSA5100A Series Printable Help 3
About Tektronix Analyzers Product Description
Analyze
Extensive time-correlated multi-domain displays connect problems in time, frequency, phase and amplitude for quicker understanding of cause and effect when troubleshooting.
Power measurements and signal statistics help you characterize components and systems: ACLR, Multi-Carrier ACLR, Power vs. Time, CCDF, Phase Noise, and Spurious.
Advanced Measurement Suite (Opt. 20): Pulse measurements including rise time, pulse width, duty, ripple, power, frequency and phase provide deep insight into pulse train behavior.
General Purpose Digital Modulation Analysis (Opt. 21): Provides vector signal analyzer functionality.
Product Description
SignalVu™ vector signal analysis software helps you easily validate wideband designs and ch wideband spectral events. By combining the signal analysis engine of the RSA6100B Real-Time Analyzer with that of the industry’s widest bandwidth digital oscilloscopes, designers can now evaluate complex signals up to 20 GHz without the need of an external down converter. You get the functionality of a vector signal analyzer, a signal analyzer and the powerful trigger capabilities of a digital oscilloscope, all in a single package. Whether your design validation needs include wideband radar, high data rate satellite links or frequency hopping communications, SignalVu vector signal analysis software c time-to-insight by showing you time variant behavior of these wideband signals.
aracterize
an speed your
Key Features
Tightly integrated software and hardware control allows you to easily switch between SignalVu and oscilloscope user interfaces to optimize triggers and other acquisition parameters. Key features of SignalVu include:
Direct observation of microwave signals to 20 GHz without an external down converter
All signals up to the analog bandwidth of oscilloscope are captured in memory
Customizable oscilloscope acquisition parameters for effective use of capture memory
Four channel acquisitions help you correlate independent RF events
Apply custom math and ltering to acquisition channels
Extensive time-correlated, multi-domain displays connect problems in time, frequency, phase and amplitude for quicker understanding of cause and effect when troubleshooting
Power measurements and signal statistics help you characterize components and systems: ACLR, Multi-Carrier ACLR, Power vs. Time, CCDF, OBW/EBW, and Spur Search
Advanced Signal Analysis Suite (Opt. SVP) provides automated pulse measurements including rise time, pulse width and pulse-to-pulse phase provide deep insight into pulse train behavior
General Purpose Digital Modulation Analysis (Opt. SVM) provides vector signal analyzer functionality
4 RSA6100B Series & RSA5100A Series Printable Help
About Tektronix Analyzers Product Software
Settling Time Measurements (Option SVT) provides Frequency and Phase settling time measurements
Flexible OFDM Analysis (Option SVO) provides measurements for OFDM signals specied by
802.11a/g/j (Wi) and 802.16 (ETSI)
Audio Analysis (Option SVA) provides AM/FM audio measurements
Tektronix OpenChoice® enables easy transfer to a variety of analysis programs such as Excel and Matlab
Product Software
The instrument includes the following software:
RSA6100B Series System Software: The RSA6100B Series product software runs on a specially congured version of Windows 7. As with standard Windows 7 installations, you can install other compatible applications, but the installation and use of non-Tektronix software is not supported by Tektronix. If you need to reinstall the operating system, follow the procedure in the Restoring the Operating System chapter in the RSA6100B Series Real-Time Signal Analyzers Service manual (Tektronix part number 077-0648-XX). You can download a PDF version o f the Service manual at www.tektronix.com/manuals provided by Tektronix for use with your instrument.
. Do not substitute any version of Windows that is not specically
RSA5100A System Software: The RSA5100A Series product software runs on Windows 7. As with standard Windows 7 installations, you can install other compatible applications, but the installation and use of non-Tektronix software is not supported by Tektronix. If you need to reinstall the operating system, follow the procedure in the Restoring the Operating System chapter in the RSA5100A Series Real-Time Signal Analyzers Service manual (Tektronix part number 077-0522-XX). You can download a PDF version of the Service manual at www.tektronix.com/manuals version of Windows that is not specically provided by Tektronix for use with your instrument.
Product Software: The product software is the instrument application. (UI) and all other instrument control functions. You can minimize o r even exit/restart the instrument application as your needs dictate.
Occasionally new versions of software for your instrument may become available at our Web site. Visit
www.tektronix.com/software
Software and Hardware Upgrades
Tektronix may offer software or hardware upgrade kits for this instrument. Contact your local Tektronix distributor or sales ofce for more information.
Standard Accessories
. Do not substitute any
It provides the user interface
for information.
The standard accessories for the RSA6100B Series and RSA5100A Series instruments are shown below. For the latest information on available accessories, see the Tektronix Web site
RSA6100B Series & RSA5100A Series Printable Help 5
.
About Tektronix Analyzers Standard Accessorie s
Quick Start User Manual
English - Option L0, Tektronix part number 071-2838-XX
Japanese - Option L5, Tektronix part number 071-2840-XX
Russian, Option L10, Tektronix part number 071-2841-XX
Simplied C
hinese - Option L7, Tektronix part number 071-2839-XX
Applications Instructions
English – Tektronix part number 071-2834-XX
Simplifie
Japanese - Option L5, Tektronix part number 071-2836-XX
Russian, Option L10, Tektronix part number 071-2837-XX
Product
The Product Documentation CD-ROM contains PDF versions of all printed manuals. The Product Docume PDF format:
RSA61 Instructions manual PDF, Tektronix part number 077-0521-XX
RSA6
RSA5100A Series Service Manual PDF, Tektronix part number 077-0522-XX
d Chinese - Option L7, Tektronix part number 071-2835-XX
Documentation CD-ROM
ntation CD-ROM also contains the following manuals, some of which are available only in
00B Series and RSA5100A Series Real-Time Signal Analyzers Declassication and Security
100B Series Service Manual PDF, Tektronix part number 077-0648-XX
RSA6100B Series and RSA5100A Series Programmer Manual PDF, Tektronix part number 077-0523-XX
RSA6100B Series Specications and Performance Verication PDF, Tektronix part number 077-0647-XX
RSA5100A Series Specications and Performance Verication PDF, Tektronix part number 077-0520-XX
Other related materials
NOTE. To check for updates to the instrument documentation, browse to www.tektronix.com/manuals and search by your instrument's model number.
6 RSA6100B Series & RSA5100A Series Printable Help
About Tektronix Analyzers Recommended Accessories
Important Documents Folder
Certicate of Calibration documenting NIST traceability, 2540-1 compliance, and ISO9001 registration
Power Cords
North America - Option A0, Tektronix part number 161-0104-00)
Universal Euro - Option A1, Tektronix part number 161-0104-06
United Kingdom - Option A2, Tektronix part number 161-0104-07
Australia - Option A3, Tektronix part number 161-0104-05
240V Nort
Switzerland - Option A5, Tektronix part number 161-0167-00
Japan - Option A6, Tektronix part number 161-A005-00
China - Option A10, Tektronix part number 161-0306-00
India - Option A11, Tektronix part number 161-0324-00
No power cord or AC adapter - Option A99
h America - Option A4, Tektronix part number 161-0104-08
Optical Wheel Mouse
Product Software CD
RF Input Connectors (RSA6100B Series)
nar Crown® RF input connector - Type N (RSA6106B, RSA6114B), Tektronix part number
Pla 131-4329-00
anar Crown® RF input connector - 3.5 mm female (RSA6120B), Tektronix part number 131-9062-00
Pl
Recommended Accessories
The recommended accessories for the RSA6100B Series and RSA5100A Series instruments are shown in the following table. For the latest information on available accessories, see the Tektronix Web site
RSA6100B Series & RSA5100A Series Printable Help 7
.
About Tektronix Analyzers Options
Item
Additional Re Series Option 56 (Windows 7 and instrument software installed)
Additional Removable Hard Drive for use with RSA5100A Series Optio installed)
Transit Case
Rackmount I
Additional Quick Start User Manual (paper)
Additional Documents CD (all manuals in PDF format)
xxx
Options
To view a listing of the software options installed on your instrument, select Help > About Your Tektronix Real-Time Analyzer. There is a label on the rear-panel of the instrument that lists installed
hardware options.
To view a listing of the software options installed in your software, select Help > About Your Tektronix Vector Signal Analysis Software.
Options can be added to your instrument. For the latest information on available option upgrades, see the Tektronix Web site
movable Hard Drive for use with RSA6100B
n 56 (Windows 7 and instrument software
nstallation Kit
.
Ordering part n
065-0751-XX
065-0852-00
016-2026-X
RSA56KR
071-2838-
063-4314-
X
XX
XX
umber
Documentation
In addition to the help, the following documents are available:
ck Start User Manual (071-2838-XX - English). The Quick Start User Manual has information
Qui
about installing and operating your instrument. The Quick Start User Manual is also available in Simplied Chinese (071-2839-XX), Japanese (071-2840-XX), and Russian (071-2841-XX).
Application Examples Reference (071-2834-XX). The Application Examples Reference provides examples of specic application problems and how to solve those problems using an RSA6100B Series Signal Analyzer. The Application Examples Reference is also available in Simplied Chinese (071-2835-XX), Japanese (071-2836-XX), and Russian (071-2837-XX).
Programmer Manual (077-0523-XX). The Programmer Manual is provided as a printable PDF le, which is located on the Documents CD. See the Documents CD-ROM for installation information.
Service Manual (RSA6100B Series: 077-0648-XX, RSA5100A Series: 077-0522-XX). The Service manual is provided as a printable PDF le, which is located on the Documents CD. See the Documents CD-ROM for installation information. The Service manual includes procedures to service the instrument to the module level and restore the operating system.
8 RSA6100B Series & RSA5100A Series Printable Help
About Tektronix Analyzers Documentation
Specications and Performance Verication Technical Reference Manual (RSA6100B Series: 077-0647-XX, RSA5100A Series: 077-0520-XX). This is a PDF-only manual that includes both the specication
Declassication and Security Instructions (RSA6100B Series a nd RSA5100A Series: 077-0521-XX memory devices from the instrument. It is located on the Documents CD.
s and the performance verication procedure. It is located on the Documents CD.
) This document helps customers with data security concerns to sanitize or remove
SignalVu Re
of the SignalVu software. It identies elements of the SignalVu screen, elements of different displays andincludesamenutree. TheReferenceManualisprovidedasaprintablePDFle.
SignalVu Programmer Manual (077-0223-XX). This document provides supplementary information about the remote commands for the SignalVu software. The Programmer Manual is provided as a printable PDF le. For detailed descriptions of the remote commands, see the RSA6100B Series
Real-Time Spectrum Analyzers, RSA5100A Series Real-Time Signal Analyzers Programmer Manual (077-0523-XX) and the DPO7000, DPO70000B/C, DSA70000B/C, MSO70000/C, MSO5000, and DPO5000
SignalVu Printable Help Document (PDF) (077-0225-XX). A PDF le version of the help that can eas
The SignalVu documentation PDFs are located on the Optional Applications Software for Windows-Based
loscopes DVD.
Oscil
The most recent versions of the product documentation, in PDF format, can be downloaded from
tektronix.com/manuals
www.
ference (Tektronix part number 077-0224-XX). This document provides a brief overview
Series Digital Oscilloscopes Programmer Manual (077-0010-10 or later).
ily be printed.
. You can nd the manuals by searching on the product name.
Other Documentation
Your instrument includes supplemental information on CD-ROM:
cuments CD (Tektronix part number 063-4314-XX)
Do
RSA6100B Series & RSA5100A Series Printable Help 9
About Tektronix Analyzers Documentation
10 RSA6100B Series & RSA5100A Series Printable Help
Orientation Front Panel Connectors
Front Panel Connectors
Item
1
2TrigIn
3
4
5
xxx
Connector
Trig Out Trigger output connector. 50 , BNC, High > 2.0 V, Low < 0.4 V, (output
USB 2.0 USB 2.0 connector.
USB 2.0 USB 2.0 connector.
RF Input
Description
current 1 mA).
External Trigger input connector, –2.5 V to +2.5 V (user settable).
RF input connector 50 Ω.
Connecting Signals and Selecting the Analysis Channel
SignalVu analyzes signals acquired by the oscilloscope. The SignalVu software analyzes one, two, or four signals at a time, so you need to specify which oscilloscope input channels to use. Math and Ref channels can also be selected.
To specify which oscilloscope channel is analyzed:
1. Select Settings > Acquire to display the Acquire control panel.
2. Select the desired signal type from the Signal Input drop-down list along the left side of the control
panel. Available choices are RF (uses one oscilloscope channel), IQ (uses two channels), and Diff IQ (uses four channels).
3. On the Ve rtic al tab, use the Source drop-down list(s) to select the channels to analyze.
4. Use the oscilloscope controls in the TekScope application to achieve a stable, triggered signal.
For information on the oscilloscope input signal capabilities and how to trigger on a signal, see the oscilloscope's help. Note that SignalVu does not control triggering on the oscilloscope; you will need to use the oscilloscope triggering functions to achieve a stable, triggered signal on the oscilloscope.
RSA6100B Series & RSA5100A Series Printable Help 11
Orientation Front-Panel Controls
Front-Panel Controls
Reference
1 Media DVD-RW or removable hard disk
2 Displays
3
4 Trigger
5
6 Analysis
7
8
9 Amplitude
10
xxx
Item Function Menu Equivalent
drive.
Opens the Displays dialog box enabling you to select which displays to open.
Settings Opens/closes the Settings control
panel for the selected display.
Opens/closes the Trigger control panel. On the RSA5100A Series, this button lights when the trigger mode is set to Triggered.
Acquire
Freq Press to adjust the measurement
Span (Spectrum)
BW (Spectrum)
Opens/closes the Acquire control panel.
Opens/closes the Analysis control panel.
frequency.
Press to adjust the span or press and hold to display the Freq & Span control panel for the General Signal Viewing displays.
Opens/closes the Amplitude control panel.
Press to adjust the bandwidth or press and hold to display the BW control panel for the General Signal Viewing displays.
Setup > Displays
Setup > Settings
Setup > Trigger
Setup > Acquire
Setup > Analysis
Setup > Analysis > Frequency
Setup > Amplitude
12 RSA6100B Series & RSA5100A Series Printable Help
Orientation Front-Panel Controls
Reference
11
12
Item Function Menu Equivalent
Run/Stop Starts and stops acquisitions. Run > Start Run > Stop
Peak (Markers section)
Moves the active marker to the maximum peak of the trace in the selected display. If markers are turned off, the marker reference (MR) will appear at the maximum peak.
13
Select (Markers section)
Selects the next marker. If markers are turned off, the MR m arker (marker reference) will appear.
14
Dene (Markers section)
Opens the Markers control panel. If markers are turned off, the MR marker (reference) will appear.
15
Control knob Changes values in numeric and list
controls. Pressing the knob (clicking it) is the same as pressing the Enter key on a k eyboard.
16 Arrow keys Move the Markers. The Up arrow
moves the selected marker to the next highest peak. The down arrow moves the selected marker to the next lower peak value. The right and left arrows move the selected marker to the next peak.
17
18
Increment/decre­ment keys
Delete, (Markers
Increments or decrements the selected value
Deletes the selected marker
section)
19
Add, (Markers
Add a marker to the selected trace
section)
20 Replay Replays the current acquisition record
21
Single Sets the Run mode to Single
Sequence
xxx
Markers > Peak
RSA6100B Series & RSA5100A Series Printable Help 13
Orientation Front-Panel Controls
Reference
22 Keypad Enters valu
23 Enter
Item Function Menu Equiva
es in numeric controls.
Completes
data entry in controls. Same as pressing the Enter key on an external keyboard.
xxx
Reference
24 Recall
25
26
Item Function Menu Equivalent
Opens the Recall dialog box.
Save Opens the Save As dialog box. File > Save As
Touch Screen Off Turns the touch screen on and off. It
is off when lighted.
27 Help Displays the help.
28 Applic
Sets the instrum ent to the selected Application Preset values.
29 DPX
Sets the instrum ent to the selected DPX Preset values.
30 User
Sets the instrum ent to the selected User Preset values.
31 Preset
Returns the instrument to the default or preset values.
xxx
lent
File > Recall
Help > Online Manual
Setup > More Presets > Application
Setup > More Presets > DPX
Setup > More Presets > User
Setup > Preset
14 RSA6100B Series & RSA5100A Series Printable Help
Orientation Front-Panel Controls
Front-Panel Controls
The front-panel controls remain dedicated to oscilloscope control functions when SignalVu is running. The front-panel buttons and knobs of the oscilloscope do not have any effect on the S ignalVu software settings.
NOTE. One but will halt data acquisition in the SignalVu software.
Touch Scre
You c a n use keyboard. Generally, touch can be used anywhere that click is mentioned in this help.
To disable the touch screen, push the front-p anel TouchScreenOffbutton. When the touch screen is off, the button is lighted. You can still access the on-screen controls with a mouse or keyboard.
You can adjust the touch screen oper ation to your personal preferences. To adjust the touch screen settings, from Windows, select Start > Control Panel > Touch Screen Calibrator.
NOTE. If the instrument is powered on in Windows Safe Mode, the touch screen is inoperative. You will need to use a mouse or keyboard to restore normal operation.
ton that affects the SignalVu software is the Run/Stop button. Pressing the Stop button
en
touch to control the instrument in addition to the front-panel controls, mouse, or extended
Touch-Screen Actions
You can use the touch screen to change marker settings and how waveforms are displayed by using the Touch-screen Actions menu.
RSA6100B Series & RSA5100A Series Printable Help 15
Orientation Touch-Screen Actions
To use the Touch-screen Actions menu, touch the display in a graph area and hold for one second, then remove your nger. You can also use a mouse to display the Touch-screen Action menu by clicking the right mouse button.
16 RSA6100B Series & RSA5100A Series Printable Help
Loading...
+ 468 hidden pages