Tektronix RSA6106A, RSA6120A Field Install Instructions

xx
RSA6100A Series Real-Time Spectrum Analyzers, RSA6100B Series Real-Time Signal Analyzers, and RSA5100A Series Real-Time Signal Analyzers Option 21 General Purpose Digital Modulation Analysis
ZZZ
Upgrade
Instructions
P071285501*
*
071-2855-01
Copyright © Tektronix. All rights reserved. Licensed software products are owned by Tektronix or its subsidiaries or suppliers, and are protected by national copyright laws and international treaty provisions.
Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all previously published material. Specications and price change privileges reserved.
TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.
Contacting Tektronix
Tektronix, Inc. 14150 SW Karl Braun Drive P.O . B ox 5 00 Beaverto USA
For product information, sales, s ervice, and technical support:
n, OR 97077
In North America, call 1-800-833-9200. Worl d wi de, visi t www.tektronix.com to nd contacts in your area.
Table of Contents
Kit Description....................... ................................ .................................. ............. 1
Products............ .................................. ................................ ........................... 1
Kit Parts List .......... .................................. ................................ ....................... 2
Installati
on Instructions ............................................................................................ 2
Updating the Instrument Application Software ..... ................................ ....................... 2
Install Option Key ...................... ................................ ................................ ....... 3
Installing the Option Key Label. . ... ... . ... ... . ... ... . ... ... . ... ... . ... ... . ... ... . ... ... . ... ... . ... ... . ... ... 4
RSA6100A, RSA6100B, and RSA5100A Series Option 21 Upgrade i
Table of Contents
ii RSA6100A, RSA6100B, and RSA5100A Series Option 21 Upgrade
Kit Description
Products
This kit describes the installation of the Option 21 General Purpose Digital Modulation Analysis Upgrade in RSA6100A Series, RSA6100B, and RSA5100A Series instruments.
RSA6100A Series. All serial numbers
RSA6100B S
RSA5100A Series. All serial numbers
eries. All serial numbers
RSA6100A, RSA6100B, and RSA5100A Series Option 21 Upgrade 1
Installation Instructions
Kit Parts List
Quantity Part number Description
1 ea 071-2855-01
1ea
1ea
1
NS — Not saleable
Installation Instructions
The software that takes General Purpose Digital Modulation Analysis measurements is include d in all analyzers running current application software
n 2.5.0080 or higher. However, you need an option installation key to
versio activate it. To activate the Advanced Signal Analysis Measurements capability, you must enter the new option installation key supplied with this kit into the analyzer application. If your analyzer is running an earlier version of the application software, download and install the latest software before entering the option key that enables the General Purpose Digital Modulation Analysis
urements.
meas
MANUAL, TECH: INSTALLATION, RSA5K/6K GENERAL PURPOSE DIGITAL MODULATION ANALYSIS
1
NS
NS LABEL, MANUFACTURED; OPTION KEY
DATA SHEET; SOFTWARE OPTION KEY AUTHORIZATION CERTIFICATE, UPGRADE KITS
UPGRADE LABEL 2.100 X 2.700, SAFETY CONTROLLED
Updating the Instrument Application Software
ect Help > About from the analyzer software menu bar to check the version of
Sel your analyzer’s software. The software version appears at the top-right corner of the About box. If your analyzer is not running version 2.5.0080 or later software, download and install the latest version of the application software. If your analyzer is running version 2.5.0080 or later software, proceed to Install Option Key.
To install the latest version of the analyzer application software:
1. Use your Web browser to go to: www.tektronix.com/software.
2. Enter your instrument model number in the Search by keyword text box and click Go.
3. Follow the link for the analyzer software and download the software.
4. Follow the instructions on the Web page to install the software.
2 RSA6100A, RSA6100B, and RSA5100A Series Option 21 Upgrade
Installation Instructions
Install Optio
nKey
To activate the General Purpose Digital Modulation Analysis Measurements option:
1. In the analyzer application, select Tools > Install Upgrades.TheInstall Upgrade wizard will start. Click Continue.
The Install Upgrade Enter Key screen appears.
RSA6100A, RSA6100B, and RSA5100A Series Option 21 Upgrade 3
Installation Instructions
2. Type the option An Install Upgrade Success dialog box opens.
3. Click Close.E feature.
4. In the Help m
5. Look in the Installed Options listing and verify that General Purpose Modulation
Installing the Option Key Label
Place the
This completes the installation of the Option 21 General Purpose Digital Modulat
End of Document
ion Analysis upgrade kit.
installation key into the empty text box and click Continue.
xit and restart the analyzer application to enable the new
enu, select About Tektronix Real-Time Analyzer.
Analysis (Opt 21) appears in the listing.
new option key label over the existing label on the instrument rear panel.
4 RSA6100A, RSA6100B, and RSA5100A Series Option 21 Upgrade
Loading...