Tektronix RSA6106A, RSA6114A, RSA6120A, RSA6106B, RSA6114B Field Install Instructions

...
xx
RSA6100A Series (Serial Numbers B020000 and Above) RSA6100B Series Real-Time Analyzers
ZZZ
110 MHz Real-Time Capture Bandwidth
Instructions
www.tektronix.com
P071256401*
071-2564-01
Copyright © Tektronix. All rights reserved. Licensed software products are owned by Tektronix or its subsidiaries or suppliers, and are protected by national copyright laws and international treaty provisions.
Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all previously published material. Specications and price change privileges r eserved.
TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.
Contacting Tektronix
Tektronix, Inc. 14150 SW Karl Braun Drive P.O . B ox 5 0 0 Beaverto USA
For product information, sales, service, and technical support:
n, OR 97077
In North America, call 1-800-833-9200. Worl d wide , vi s it www.tektronix.com to nd contacts in your area.
Table of Contents
Kit Description......... ................................ ................................ ............................. 1
Products.................. ................................ ................................ ....................... 1
Kit Parts List .............. .................................. ................................ ................... 1
Installati
on Instructions ............................................................................................ 2
Install Option Key .... .................................. ................................ ....................... 2
Installing the Option Key Label. . ... ... . .. . ... ... . ... ... . . .. . ... ... . ... ... . . .. . ... ... . ... ... . . .. . ... ... . ... .. 4
RSA6100A and RSA6100B Series Option 110 Upgrade i
Table of Contents
ii RSA6100A and RSA6100B Series Option 110 Upgrade
Kit Description
Products
This kit describes the installation of the 110 MHz Real-Time Capture Bandwidth Upgrade (Option 110) in an RSA6100A Series Real-Time Spectrum Analyzer and RSA6100B Series Real-Time Signal Analyzer.
RSA6100A Series. Serial numbers B020000 and above.
Kit Parts List
RSA6100B S
Quantity Part number Description
1 ea 071-2564-01
1ea
1ea
1
NS — Not saleable
eries. All serial eumbers.
MANUAL, TECH: INSTALLATION, RSA6UP, OPT110
1
NS
NS LABEL, MANUFACTURED; OPTION KEY
DATA SHEET; SOFTWARE O PTION KEY AUTHORIZATION CERTIFICATE, UPGRADE KITS
UPGRADE LABEL 2.100 X 2.700, SAFETY CONTROLLED
RSA6100A and RSA6100B Series Option 110 Upgrade 1
Installation Instructions
Installation Instructions
The hardware that enables 110 MHz real-time capture bandwidth is included in all real RSA6100A Series analyzers with serial numbers above B020000 and all RSA6100B to activate the hardware. To activate the 110 MHz real-time capture bandwidth, you must enter the new option installation key supplied with this kit into the spectrum analyzer application. If your RSA6100A Series spectrum analyzer has a serial number of B01XXXX, this kit will not work for your instrument. You need the RSA6UP Option 110L kit to upgrade your instrument to 110 MHz real-tim
Install Option Key
e capture bandwidth.
Series analyzers. However, you need an option installation key
To activ
1. In the analyzer application, select Tools > Install Upgrades.TheInstall
ate the 110 MHz real-time capture bandwidth:
Upgrad
e wizard will start. Click Continue.
2 RSA6100A and RSA6100B Series O ption 110 Upgrade
Installation Instructions
2. The Install Upg
3. Type the option installation key into the empty text box and click Continue.
An Install Upgrade Success dialog box opens.
rade Enter Key screen appears (see Figure 2).
RSA6100A and RSA6100B Series Option 110 Upgrade 3
Installation Instructions
4. Click Close.Ex
5. To verify the new option is enabled, select Help > About Tektronix
Real-Time Ana
6. Look in the Installed Options listing and verify that 110 MHz Capture
BW (Opt 110)
Installing the Option Key Label
Place the n
This completes the installation of the 110 MHz real-time capture bandwidth (Option 1
End of Document
it and restart the RSA application to enable the new feature.
lyzer.
appears in the listing.
ew option key label over the existing label on the instrument rear panel.
10) upgrade kit.
4 RSA6100A and RSA6100B Series O ption 110 Upgrade
Loading...