Tektronix RSA6106A Field Install Instructions

Instructions

RSA6100A Series Real-Time Spectrum Analyzers

Phase Noise and Jitter Measurement (Option 11)
Upgrade

071-2558-00

Warning

The servicing instructions are for use by qualified
personnel only. To avoid personal injury, do not
perform any servicing unless you are qualified to
do so. Refer to all safety summaries prior to
performing service.

www.tektronix.com

*P071255800*

071255800

Copyright © Tektronix. All rights reserved. Licensed software products are owned by Tektronix or its subsidiaries or
suppliers, and are protected by national copyright laws and international treaty provisions.

Tektronix products are covered by U.S. and foreign patent s, issued and pending. Information in this publication superced es
that in all previously published material. Specifications and price change privile ges reserved.

TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.

Contacting Tektronix

Tektronix, Inc.
14200 SW Karl Braun Drive
P.O. Box 500
Beaverton, OR 97077
USA

For product information, sales, service, and technical support:

H In North America, call 1-800-833-9200.

H Worldwide, visit www.tektronix.com to find contacts in your area.

Kit Description

Products

Kit Parts List

This kit describes the installation of the Phase Noise and Jitter Measurement
Upgrade (Option 11) in an RSA6100A Series Real-Time Spectrum Analyzer.

RSA6100A Series All Serial Numbers.

Quantity Part number Description

1ea 071-2558-00 MANUAL, TECH: INSTALLATION, RSA6UP, OPT11

1ea NS DATA SHEET; SOFTWARE OPTION KEY AUTHORIZATION

CERTIFICATE, UPGRADE KITS

1ea NS LABEL, MANUFACTURED; OPTION KEY UPGRADE LABEL

2.100 X 2.700, SAFETY CONTROLLED

NS Not Saleable

RSA6100A Series Phase Noise and Jitter Measurement Installation (Option 11)

1