xx
RSA5UP (Software Options)
RSA5100A Series Real-Time Signal Analyzers
ZZZ
Software Only Upgrades
Instructions
www.tektronix.com
P075107800*
*
075-1078-00
Copyright © Tektronix. All rights reserved. Licensed software products are owned by Tektronix or its subsidiaries
or suppliers, and are protected by national copyright laws and international treaty provisions.
Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication
supersedes that in all previously published material. Speci¿cations and price change privileges reserved.
TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.
Kit description
Products
This kit provides instructions to activate software upgrades to the RSA5100A
Series Real-Time Signal Analyzers.
The option you’ve ordered only requires that you enter a key code to activate
your option.
For a list of available options, see the Tektronix Web site (www.tektronix.com) or
your Tektronix representative.
RSA5103A. All serial numbers
RSA5106A. All serial numbers
RSA5115A. All serial numbers
RSA5126A. All serial numbers
Option kit parts list
Quantity Part number Description
1 ea 075-1078-xx
1ea
Minimum tool and equipment list
Name Description
Keyboard
INSTR
OPTIONS
N/A LABE
LABEL
UCTIONS, UPGRADE: RSA5AUP SOFTWARE
L, MANUFACTURED; OPTION KEY UPGRADE
Standard accessory provided with the
instrument
RSA5100A Series Software Options Upgrades 1
Install option key
Install option key
To activate your new option, you must enter a new option key.
1. Power on the instrument.
2. Select Tools > Install Upgrades... to start the upgrade installation process.
3. Click Continue from the Install Upgrades introduction screen.
2 RSA5100A Series Software Options Upgrades
Install option key
4. Enter the optio
instructions to install the option.
n key provided by Tektronix, and follow the on-screen
5. Power off the instrument, then power back on.
6. In the Help menu, select About Tektronix Real-Time Analyzer.
7. Verify the new option is listed.
RSA5100A Series Software Options Upgrades 3
Verify instrument software version
Attach labels
Please attach all labels provided in this kit on the instrument’s rear panel.
Attach the option key label
Place the new option key label over the existing label on the instrument rear panel.
Verify instrument software version
Tektronix recommends to update to the latest available application software for
your instrument.
1. Select Help > About to check the software version.
2. Use your W
3. Search for your instrument’s model number and follow the link to the software.
4. If the installed software is older than that available, download the software.
5. Follow the instructions on the Web page to install the software.
Ŷ End of Document Ŷ
eb browser to go to: www.tektronix.com/software.
4 RSA5100A Series Software Options Upgrades
Loading...