Instructions
RM3000 Rackmount Kit
for TDS3000 Series Oscilloscopes
071-0326-00
Copyright © T ektronix, Inc. All rights reserved.
T ektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supercedes
that in all previously published material. Specifications and price change privileges reserved.
Printed in the U.S.A.
T ektronix, Inc., P.O. Box 1000, Wilsonville, OR 97070–1000
TEKTRONIX and TEK are registered trademarks of T ektronix, Inc.
WARRANTY
T ektronix warrants that the products that it manufactures and sells will be free from defects in materials and
workmanship for a period of one (1) year from the date of purchase from an authorized T ektronix distributor. If
any such product proves defective during this warranty period, T ektronix, at its option, either will repair the
defective product without charge for parts and labor, or will provide a replacement in exchange for the defective
product. Batteries are excluded from this warranty.
In order to obtain service under this warranty, Customer must notify Tektronix of the defect before the expiration
of the warranty period and make suitable arrangements for the performance of service. Customer shall be
responsible for packaging and shipping the defective product to the service center designated by T ektronix,
shipping charges prepaid, and with a copy of customer proof of purchase. Tektronix shall pay for the return of the
product to Customer if the shipment is to a location within the country in which the T ektronix service center is
located. Customer shall be responsible for paying all shipping charges, duties, taxes, and any other charges for
products returned to any other locations.
This warranty shall not apply to any defect, failure or damage caused by improper use or improper or inadequate
maintenance and care. T ektronix shall not be obligated to furnish service under this warranty a) to repair damage
resulting from attempts by personnel other than T ektronix representatives to install, repair or service the product;
b) to repair damage resulting from improper use or connection to incompatible equipment; c) to repair any
damage or malfunction caused by the use of non-T ektronix supplies; or d) to service a product that has been
modified or integrated with other products when the effect of such modification or integration increases the time
or difficulty of servicing the product.
THIS WARRANTY IS GIVEN BY TEKTRONIX WITH RESPECT TO THE LISTED PRODUCTS IN
LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED. TEKTRONIX AND ITS VENDORS
DISCLAIM ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
P ARTICULAR PURPOSE. TEKTRONIX’ RESPONSIBILITY TO REPAIR OR REPLACE DEFECTIVE
PRODUCTS IS THE SOLE AND EXCLUSIVE REMEDY PROVIDED TO THE CUSTOMER FOR
BREACH OF THIS WARRANTY. TEKTRONIX AND ITS VENDORS WILL NOT BE LIABLE FOR ANY
INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES IRRESPECTIVE OF
WHETHER TEKTRONIX OR THE VENDOR HAS ADVANCE NOTICE OF THE POSSIBILITY OF
SUCH DAMAGES.
Contacting Tektronix
Product
Support
Service
Support
For other
information
To write us Tektronix, Inc.
For application-oriented questions about a Tektronix measurement product, call toll free in North America:
1-800-TEK-WIDE (1-800-835-9433 ext. 2400)
6:00 a.m. – 5:00 p.m. Pacific time
Or contact us by e-mail:
tm_app_supp@tek.com
For product support outside of North America, contact your
local Tektronix distributor or sales office.
Contact your local Tektronix distributor or sales office. Or visit
our web site for a listing of worldwide service locations.
http://www.tek.com
In North America:
1-800-TEK-WIDE (1-800-835-9433)
An operator will direct your call.
P.O. Box 1000
Wilsonville, OR 97070-1000
RM3000 Rackmount Kit Instructions
i
Contacting Tektronix
ii
RM3000 Rackmount Kit Instructions
Installation
Unpack
The RM3000 Rackmount kit fits all TDS3000 Series Oscilloscopes. Unpack and
assemble the RM3000 Rackmount as shown in the illustrations on the following
pages.
RM3000 Rackmount Kit Instructions
1
Installation
Install Pads
2
RM3000 Rackmount Kit Instructions
Install Oscilloscope
Rotate the
handle down
Installation
RM3000 Rackmount Kit Instructions
3
Installation
Install Retainers
8-32 Lock nuts (6)
Retainers (2)
8-32 Lock nuts (6)
4
RM3000 Rackmount Kit Instructions
Install Handles and Brace
Brace
Installation
Handles (2)
Pan-head
screws (4)
Lockwashers (4)
Lockwashers (4)
Pan-head
screws (4)
RM3000 Rackmount Kit Instructions
5
Installation
Install Covers or Optional BNCs
Optional BNC (order 103-0070-00)
Covers (5)
6
RM3000 Rackmount Kit Instructions
Mount in Rack
Installation
To mount the completed assembly, select the appropriate size metric or English
screws for the rack.
RM3000 Rackmount Kit Instructions
Washers (4)
Screws (4)
(Select appropriate size)
MetricEnglish
# 12 # 10 M6 M5
7
Installation
Store Properly
8
RM3000 Rackmount Kit Instructions
Environmental Specifications
With the exception of the following characteristics, the environmental specifications listed in the associated user and service manuals apply to the rackmounted
instrument.
Name Description
Temperature Operating: +5_ C to +50_ C, ambient temperature inside rack cabinet
Non-operating: –20_ C to +60_ C, ambient temperature inside rack cabinet
Vibration Operating: 0.26g rms, 5–500Hz, 10 min per axis
Non-operating: 2.3g rms, 5 to 500Hz, 10 min per axis
Shock Operating and non-operating: 30g, 11ms, half-sine, 3 Axis, 3 drops each
Dimensions
Installation
483 mm
(19.000 in)
176 mm
(6.950 in)
152 mm
(5.985 in)
RM3000 Rackmount Kit Instructions
9
Installation
10
RM3000 Rackmount Kit Instructions
Loading...