Tektronix PSM3110, PSM3120, PSM3310, PSM3320, PSM3510 Performance Verification
...
xx
PSM3000, PSM4000, and PSM5000 Series
RF and Microwave Power Sensors/Meters
ZZZ
Specifications and Performance Verification
Technical Reference
*P077060300*
077-0603-00
xx
PSM3000, PSM4000, and PSM5000 Series
RF and Microwave Power Sensors/Meters
ZZZ
Specifications and Performance Verification
Technical Reference
www.tektronix.com
077-0603-00
Copyright © Tektronix. All rights reserved. Licensed software products are owned by Tektronix or its subsidiaries
or suppliers, and are protected by national copyright laws and international treaty provisions.
Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication
supersedes that in all previously published material. Specifications and price change privileges reserved.
TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.
Contacting Tektronix
Tektronix, Inc.
14150 SW Karl Braun Drive
P.O. Box 500
Beaverto
USA
For product information, sales, service, and technical support:
n, OR 97077
In North America, call 1-800-833-9200.
Worl dwid e, v isit www.tektronix.com to find contacts in your area.
Warranty
Tektronix warrants that this product will be free from defects in materials and workmanship for a period of three
(3) years from the date of shipment. If any such product proves defective during this warranty period, Tektronix, at
its option, either will repair the defective product without charge for parts and labor, or will provide a replacement
in exchange for the defective product. Parts, modules and replacement pr oducts used by Tektronix for warranty
work may be n
the property of Tektronix.
ew or reconditioned to like new performance. All replaced parts, modules and products become
In order to o
the warranty period and make suitable arrangements for the performance of service. Customer shall be responsible
for packaging and shipping the defective product to the service center designated by Tektronix, with shipping
charges prepaid. Tektronix shall pay for the return of the product to Customer if the shipment is to a location within
the country in which the Tektronix service center is located. Customer shall be responsible for paying all shipping
charges, duties, taxes, and any other charges for products returned to any other locations.
This warranty shall not apply to any defect, failure or damage caused by improper use or improper or inadequate
maintenance and care. Tektronix shall not be obligated to furnish service under this warranty a) to repair damage
result
b) to repair damage resulting from improper use or connection to incompatible equipment; c) to repair any damage
or malfunction caused by the use of non-Tektronix supplies; or d) to service a product that has been modified or
integrated with other products when the effect of such modification or integration increases the time or difficulty
of servicing the product.
THIS WARRANTY IS GIVEN BY TEKTRONIX WITH RESPECT TO THE PRODUCT IN LIEU OF ANY
OTHER WARRANTIES, EXPRESS OR IMPLIED. TEKTRONIX AND ITS VENDORS DISCLAIM ANY
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
TRONIX' RESPONSIBILITY TO REPAIR OR REPLACE DEFECTIVE PRODUCTS IS THE SOLE
TEK
AND EXCLUSIVE REMEDY PROVIDED TO THE CUSTOMER FOR BREACH OF THIS WARRANTY.
TEKTRONIX AND ITS VENDORS WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL,
OR CONSEQUENTIAL DAMAGES IRRESPECTIVE OF WHETHER TEKTRONIX OR THE VENDOR HAS
ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.
[W4 – 15AUG04]
btain service under this warranty, Customer must notify Tektronix of the defect before the expiration of
ing from attempts by personnel other than Tektronix representatives to install, repair or service the product;
Table of Contents
General Safety Summary ......................................................................................... iii
Preface ............................................................................................................... v
Specifications ...................... .................................. ................................ ............... 1
Performanc
Test Records... ................................ .................................. .............................. 21
eVerification ....................... ................................ .................................. 11
PSM3000, PSM4000, and PSM5000 Series Technical Reference i
Table of Contents
List of Tables
Table i: Related manuals........ ................................ .................................. ................. v
Table 1: H ar
Table 2: Trigger specifications .................................................................................... 8
Table 3: USB interface connector pin definitions.... . ..... . ..... . . ..... . ..... . ..... . ..... . .... . . . ..... . ..... . . 10
Table 4: Mechanical characteristics ..................... ................................ ........................ 10
Table 5: Required equipment............... ................................ .................................. .... 13
Table 6: Level accuracy worksheet.............................................................................. 32
Table 7: L
dware specifications .. .................................. ................................ ............. 1
inearity worksheet ..................................................................................... 34
ii PSM3000, PSM4000, and PSM5000 Series Technical Reference
General Safety Summary
General Safet
To Avoid Fire or Personal
Injury
ySummary
Review the fo
this product or any products connected to it.
To avoid pot
Only qualified personnel should perform service procedures.
While using this product, you may need to access other parts of a larger system.
Read the safety sections of the other component manuals for warnings and
cautions r
Observe all terminal ratings. To avoid fire or shock hazard, observe all ratings
and markings on the product. Consult the product manual for further ratings
information before making connections to the product.
The inputs are not rated for connection to mains or Category II, III, or IV circuits.
Do not apply a potential to any terminal, including the common terminal, that
exceeds the maximum rating of that terminal.
Do not operate without covers. Do not operate this product with covers or panels
removed.
llowing safety precautions to avoid injury and prevent damage to
ential hazards, use this product only as specified.
elated to operating the system.
TermsinThisManual
Do not operate with suspected failures. If you suspect that there is damage to this
product, have it inspected by qualified service personnel.
Avoid exposed circuitry. Do not touch exposed connections and components when
power is present.
Do not operate in wet/damp conditions.
not operate in an explosive atmosphere.
Do
Keep product surfaces clean and dry.
These terms may appear in this manual:
WAR NI NG . Warning statements identify conditions or practices that could result
in injury or loss of life.
CAUTION. Caution statements identify conditions or practices that could result in
damage to this product or other property.
PSM3000, PSM4000, and PSM5000 Series Technical Reference iii
General Safety Summary
Symbols and Terms on the
Product
These terms may
DANGER indicates an injury hazard immediately accessible as you read
the marking.
WARNING indicates an injury hazard not immediately accessible as you
read the mar
CAUTION indicates a hazard to property including the product.
The following symbol(s) may appear on the product:
appear on the product:
king.
iv PSM3000, PSM4000, and PSM5000 Series Technical Reference
Preface
Preface
This documen
t contains the Specifications and the Field Calibration procedure
for the PSM3000, PSM4000, and PSM5000 USB Power Sensors. It contains
procedures suitable for determining that the power sensor functions and is
calibrated properly.
Related Manuals
The following documents relate to the operation or service of the power sensor:
Table i: Related manuals
Title Description Part number
PSM3000/4000/5000 Series Safety
& Installation Manual
PSM3000/4000/5000 Series
English User Manual
PSM3000/4000/5000 Series
French User Manual
PSM3000/4000/5000 Series Italian
User Manual
PSM3000/4000/5000 Series
German User Manual
PSM3000/4000/5000 Series
Spanish User Manual
PSM3000/4000/5000 Series
Portuguese User Manual
PSM3000/4000/5000 Series
Simplified Chinese U ser Manual
PSM3000/4000/5000 Series
Traditional Chinese User Manual
PSM3000/4000/5000 Series
Korean User Manual
PSM3000/4000/5000 Series
Russian User Manual
PSM3000/4000/5000 Series
Japanese User Manual
PSM3000/4000/5000 Series
Specifications and Field Verification
Technical Reference
PSM3000/4000/5000 Series
Declassification and Security
Instructions
PSM3000/4000/5000 Series
Online Help
Describes safety practices to follow while operating a power
sensor and how to install power sensor.
Explains how to use PSM3000/4000/5000 Series USB Power
Sensors with the Power Meter Application software.
French translation of the User Manual.
Italian translation of the User Manual.
German translation of the User Manual.
Spanish translation of the User Manual.
Portuguese translation of the User Manual.
Simplified Chinese translation of the User Manual.
Traditional Chinese translation of the User M anual.
Korean translation of the User Manual.
Russian translation of the User Manual.
Japanese translation of the User Manual.
Lists the Power Sensor specifications and explains how to
perform a fi eld calibration.
Addresses customer data security concerns with information on
how to sanitize or remove memory devices from the power sensor.
Online help in the Power Meter Application software explains
how to use the Power Meter Application software with the power
sensor.
071-2958-XX
077-0592-XX
077-0593-XX
077-0594-XX
077-0595-XX
077-0596-XX
077-0597-XX
077-0598-XX
077-0599-XX
077-0600-XX
077-0601-XX
077-0602-XX
077-0603-XX
PSM3000, PSM4000, and PSM5000 Series Technical Reference v
Preface
vi PSM3000, PSM4000, and PSM5000 Series Technical Reference
Specifications
This section lists the PSM3000, PSM4000, and PSM5000 Series specifications.
Items listed in the Performance Requirement column are generally quantitative,
and are eithe
r tested by the Performance Verification procedure or are guaranteed
by design. Items listed in the Reference Information column are useful operating
parameters that have typical values; information in this column is not guaranteed.
NOTE. This section lists the PSM3000, PSM4000, and PSM5000 Series
specifications. Items listed in the Performance Requirement column are generally
quantitative, and are either tested by the Performance Verification procedure or
are guara
nteed by design. Items listed in the Reference Information column are
useful operating parameters that have typical values; information in this column
is not guaranteed.
Performance Conditions
The performance limits in these specifications are valid with these conditions:
The pow
er sensor must have been calibrated and adjusted at an ambient
temperature between +20 °C and +30 °C.
The po
wer sensor must be in an environment with temperature, altitude,
humidity, and vibration within the operating limits described in these
specifications.
The power sensor must have had a warm-up period of at least 20 minutes.
Table 1: Hardware specifications
Characteristic Description
Frequency range
PSM3110, PSM3120 10 MHz – 8 GHz
PSM3310, PSM3320 10 MHz – 18 GHz
PSM3510 10 MHz – 26.5 GHz
PSM4110, PSM4120 10 MHz – 8 GHz
PSM4320, PSM4410 50 MHz – 18.6 GHz (Type N)
50 MHz – 20 GHz (SMA)
PSM5110, PSM5120 100 MHz – 8 GHz
PSM5320, PSM5410 50 MHz – 18.6 GHz (Type N)
50 MHz – 20 GHz (SMA)
Frequency (Typical)
PSM4110, PSM4120 10 MHz – 10 GHz
PSM4320 50 MHz – 20 GHz (Type N)
PSM5110, PSM5120 100 MHz – 10 GHz
PSM5320 50 MHz – 20 GHz (Type N)
PSM3000, PSM4000, and PSM5000 Series Technical Reference 1
Specifications
Table 1: Hardware specifications (cont.)
Characteristic Description
Dynamic Range
PSM3110, PSM3120,
PSM3310. PSM3320,
PSM3510
PSM4110, PSM4120 -60 dBm to +20 dBm (10 MHz – 6 GHz)
PSM5110, PSM5120 -60 dBm to +20 dBm (100 MHz – 6 GHz)
PSM4320, PSM4410,
PSM5320. PSM5410
Maximum Average Power +20 dBm
Maximum Average Power:
Damage Level
Maximum Pulse Power +20 dBm
Maximum Pulse Power: Damage
Level
Maximum Peak Voltage
Maximum Peak-to-Average Ratio
PSM4110, PSM4120 10 MHz – 6 GHz: 80 dB
5110, PSM5120
PSM
PSM4320, PSM4410,
PSM5320, PSM5410
Video Bandwidth, typical
PSM3110, PSM3120,
PSM3310, PSM3320,
SM3510
P
PSM4110, PSM4120,
PSM4320, PSM4410,
PSM5110, PSM5120,
PSM5320, PSM5410
PSM5110, PSM5120,
PSM5320, PSM5410
Video Transition Time
PSM5110, PSM5120 10% to 90% Rise Time: 54 ns (-70 to -20 dBm pulse at 4 GHz)
PSM5320, PSM5410 10% to 90% Rise Time: 54 ns (-40 to -20 dBm pulse at 4 GHz)
Minimum Pulse Width, typical Average Power measurements: 500 ns
-55 dBm to +20 dBm
-50 dBm to +20 dBm (6 GHz – 8 G Hz)
-50 dBm to +20 dBm (6 GHz – 8 G Hz)
-40 dBm to +20 dBm
+23 dBm
+23 dBm
+25 VDC
z–8GHz: 70dB
6GH
MHz–6GHz: 80dB
100
6GHz–8GHz: 70dB
50 MHz – 20 GHz: 55 dB
Standard: 100 Hz
Standard: 10 MHz
Additional Digital Filters: 100 kHz, 200 kH z, 300 kHz, 500 kHz, 1 MHz, 2 MHz, 3 MHz, 5 MHz,
10 MHz
10% to 90% Fall Time: 44 ns (-70 to -20 dBm pulse at 4 GHz
10% to 90% Fall Time: 44 ns (-40 to -20 dBm pulse at 4 GHz)
Peak Power measurements: 200 ns
2 PSM3000, PSM4000, and PSM5000 Series Technical Reference
Loading...