Tektronix PPG3000 Series, PPG3002, PPG3004, PPG3200 Series, PED3200 Series Declassification And Security Instructions

PPG3000/PPG3200/PED3200 Series
Declassification and Security

ZZZ

Instructions

xx

www.tektronix.com

*P077077600*

077-0776-00

Copyright © Tektronix. All rights reserved. Licensed software products are owned by Tektronix or its subsidiaries or suppliers, and are protected by
national copyright laws and international treaty provisions.

Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all previously published
material. Specifications and price change privileges reserved.

TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.

Contacting Tektronix

Tektronix, Inc.
14150 SW Karl Braun Drive
P.O. B ox 5 00
Beaverton, OR 97077
USA

For product information, sales, service, and technical support:

In North America, call 1-800-833-9200.
Wor l d w i de, v isit www.tektronix.com to find contacts in your area.

Table of Contents

Preface... .................................. ................................ .................................. ....................................................... iii

Clear and sanitize procedures . . . . . . . .. .. ....... . . . . . . . . . .. ....... . . . . . . . . . .. ....... . . . . . . . . . .. ....... . . . . . . . . . .. ....... . . . . . . . . . .. ................................ 1

Memory devices ....... .................................. ................................ .................................. .................................... 1

Media and data export devices ............................................................................................................................... 5

Troubleshooting........... .................................. ................................ .................................. ...................................... 7

Clear or sanitize a nonfunctional instrument ... . . . . . . . . .. ....... . . . . . . . . . . . ....... . . . . . . . . . ....... . . . . . . . . . ....... . . . . . . . . . ....... . . ....................... 7

Change log ........................................................................................................................................................ .. 8

PPG3000/PPG3200/PED3200 Series Declassification and Security Instructions i

Table of Contents

ii PPG3000/PPG3200/PED3200 Series Declassification and Security Instructions

Preface

This document helps customers with data security concerns to sanitize or remove memory devices from the PPG3000 or
PPG3200 Series Programmable Pattern Generators or the PED3200 Series Programmable Error Detectors.

These products have data storage (memory) devices and data output devices (USB ports). These instructions tell how to
clear or sanitize the memory devices and disable the data output devices. The instructions also tell how to declassify a
non functioning instrument.

Reference

The procedures in this document are written to meet the requirements specified in:

NISPOM, DoD 5220.22–M, Chapter 8

ISFO Process Manual for Certification & Accreditation of Classified Systems under NISPOM

Products

The following Tektronix products are covered by this document:

PPG3001, PPG3002, PPG3004 Programmable Pattern Generators

PPG3201, PPG3202, PPG3204 Programmable Pattern Generators

PED3201, PED3202 Programmable Error Detectors

Terms

The following terms may be used in this document:

Clear.

This removes data on media/memory before reusing it in a secured area. All reusable memory is cleared to

deny access to previously stored information by standard means of access.

Erase.

This is equivalent to clear.

Instrument declassification.

A term that refers to procedures that must be undertaken before an instrument can be
removed from a secure environment. Decla ssification procedures include memory sanitization and memory removal,
and sometimes both.

PPG3000/PPG3200/PED3200 Series Declassification and Security Instructions iii