Tektronix P7313, P7380A, P7360A, P7340A User manual

P7313, P7380A, P7360A, and P7340A Probes
Accessory Reo

Accessory Description/specifications

HBW Straight Flex, 8 mil wire, Tip-Clip assembly

Bandwidth: >12.5 GHz (P7313)
TR: 10/90 <40 ps

HBW Right-Angle Flex, 8 mil wire, Tip-Clip assembly

Bandwidth: >12 GHz (P7313)
TR: 10/90 <42 ps

Quick C onnect, Short Flex solder tip assembly

Bandwidth: >10 GHz (P7313)
TR: 10/90 <45 ps

Quick Connect, Short Flex solder tip assembly
for use with DRAM interposers

Performance is determined by the probe and tip used
with the square pin adapter.

Quick Connect, Medium Flex solder tip assembly

Bandwidth: >10 GHz (P7313)
TR: 10/90 <45 ps

rder List and Summary

2

2

2

2

1

Recommended use Part number

Highest bandwidth and best probe
loading.

Provides an alternate orientation for
solder connection.

High bandwidth and good signal
fidelity, ideal for connecting to test
points in tight spaces.

Damping resistors matched to
memory interposers with embedded
resistors.

High bandwidth and good signal
fidelity, ideal for connecting to test
points in tight spaces.

020-2639-xx
(Qty 10)

020-2657-xx
(Qty 5)

020-2638-xx
(Qty 10)

020-2656-xx
(Qty 5)

020-3148-xx
(Qty 3)

020-3147-xx
(Qty 3)

020-3149-xx
(Qty 3)

Square Pin, Tip-Clip assembly for use with
Quick Connect Flex solder tips

Square Pin, Tip-Clip Kit for use with square pins

Bandwidth: >6.0 GHz
TR: 10/90 <70 ps

Short Flex, Large Resistor, 1/8 W Tip-Clip assembly

Probe model

P7313 & P7380A

Short Flex, Small Resistor, Tip-Clip assembly

Probe model Bandwidth

P7313 & P7380A >8.0 GHz

P7360A

P7340A

www.tektronix.com
Copyright © Tektronix

2

Bandwidth

>8.0 GHz

>6.0 GHz

>4.0 GHz

Rise time 10/90

2

<55 ps

Rise time 10/90

2

<55 ps

2

<70 ps

<100 ps

2

Square pin adapter without damping
resistors. For use with Quick
Connect, Flex solder tips.

Use when probing lower-speed
signals with square pin connections
(0.025-in square pins spaced 0.1-in
on center).

High bandwidth and good signal
fidelity, ideal for connecting to large
features.

Best overall signal fidelity with leaded
resistors. The small resistors are
ideal for connecting to small vias and
fine pitch circuitry.

020-3150-xx
(Qty 3)

020-2701–xx
(Qty 3)

020-2601-xx
(Qty 10)

020-2600-xx
(Qty 10)

*P001138905*

001-1389-05

P7313, P7380A, P7360A, and P7340A Probes Accessory Reorder List and Summary

Accessory Description/specifications

Medium Flex, Large Resistor, 1/8 W Tip-Clip assembly

Probe m odel Bandwidth

P7380A

P7360A

P7340A

>8.0 GHz

>5.0 GHz

>4.0 GHz

Medium Flex, Small Resistor, Tip-Clip assembly

Probe m odel Bandwidth

P7313 & P7380A >7.0 GHz

P7360A

P7340A

>5.0 GHz

>4.0 GHz

Medium Flex, Square Pin Tip-Clip assembly

Probe m odel Bandwidth

P7313, P7380A,

>5 GHz

& P7360A

P7340A

>4 GHz

Long Flex, Large Resistor, 1/8 W Tip-Clip assembly

Probe m odel Bandwidth

P7380A

>7.0 GHz

1

Rise time 10/90

<55 ps

Recommended use Part number

Good compromise between
ease-of-use and performance when
attachingtol

arger devices.

020-2603-xx
(Qty 10)

<70 ps

<100 ps

020-2602-xx
(Qty 10)

Rise time 10/90

<55 ps

Good compromise between
ease-of-us

e and small resistors for
attaching to smaller devices or circuit
board vias.

<70 ps

<100 ps

020-3116-xx
(Qty 10)

Rise time 10/90

<80 ps

This tip provides a compliant
connection to 0.025 in. (0.63 mm)
square p

ins that are spaced 0.10 in.

(2.54 mm) apart.

<100 ps

020-2605-xx
(Qty 10)

Rise time 10/90

<75 ps

Extended reach for connecting to
hard-to-reach circuitry with large
features. Sized to fit between DIMM
modules.

Flex, Small Resistor, Tip-Clip assembly

Long

Probe m odel Bandwidth

13 & P7380A

P73

P7360A

P7340A

riable Spacing Tip-Clip

Va

>6.

>4.

>4

0GHz

0GHz

.0 GHz

Probe m odel Bandwidth

7313 & P7380A

P

P7360A

P7340A

8.0 GHz

>

>6 GHz

>4 GHz

time 10/90

Rise

<130 ps

<130 ps

<130 ps

ise time 10/90

R

<55 ps

<70 ps

<100 ps

nded reach for connecting to

Exte
hard-to-reach small vias and fine
pitch circuitry. Sized to fit between

modules.

DIMM

e with Handheld Adapter for

Us
probing test points spaced from

0.020-in to 0.180-in apart.

Attachment Kit with (2) Velcro® fastening straps and (10) adhesive dots

Color Marker Band Kit (5 pairs of colors)

Handheld Probing Adapter (HHA)

Wire Replacement Kit (4 mil, 8 mil, and solder)

Replacement Probe Accessory Kits

1

All Tip-Clip specifications are typical unless indicated otherwise. The accessories and quantities in these reorder kits may differ from those shipped with the
probe. See your technical reference manual for additional Tip-Clip performance information and your user manual for a list of the standard accessories
included with the probe.

2

Guaranteed specification

P7313: 020-2636-xx, P7380A: 020-2557-xx, P7360A & P7340A: 020-2690-xx

020-2604-xx

10)

(Qty

020-2596-xx

ty 3)

(Q

016-1953-xx

016-1948-xx

015-0717-xx

020-2644-xx

2