Page 1
P7313, P7380A, P7360A, and P7340A Probe Accessory Reorder List and Performance Summary
All Tip-ClipRassemblies include 10 Tip-Clips, 3 Tip-Clip Ejectors and 1 strip of Adhesive Tip-Clip Tape (10 pieces), unless otherwise noted.
HBW Straight Flex, 8 mil wire, P/N 020-2639-XX (Qty 10)
Tip-Clip Assembly P/N 020-2657-XX (Qty 5)
Bandwidth: >12.5 GHz (P7313)
TR: 10/90 <40 ps*, 20/80 <25 ps
Loading: Z
>200 Ω to 10 GHz
MIN
Highest bandwidth and best probe loading for HBW Tip-Clip
assemblies. Using the Wire Replacement Kit allows you the
flexibility to solder 8 mil or 4 mil wires to small vias.
*Guaranteed
Short Flex, Large Resistor, 1/8 W P/N 020-2601-XX
Tip-Clip Assembly
Bandwidth: >8.0 GHz (P7380A)
T
: 10/90 <55 ps, 20/80 <35 ps
R
Loading: Z
290 Ω to8GHz
MIN
High bandwidth and good signal fidelity, ideal
for connecting to large features.
HBW Right-Angle Flex, 8 mil
wire,Tip-Clip Assembly
P/N 020-2638-XX (Qty 10)
P/N 020-2656-XX (Qty 5)
Bandwidth: >12 GHz (P7313)
T
: 10/90 <42 ps, 20/80 <27 ps
R
Loading: Z
>150 Ω to 10 GHz
MIN
Provides an alternative connection orientation. Using the Wire
Replacement Kit allows you the flexibility to solder 8 mil or 4 mil
wires to small vias.
Short Flex, Small Resistor, P/N 020-2600-XX
Tip-Clip Assembly
Bandwidth: >8.0 GHz (P7313 and P7380A)
TR: 10/90 <55 ps*, 20/80 <35 ps
Loading: Z
290 Ω to8GHz
MIN
Bandwidth: >6.0 GHz (P7360A) >4.0 GHz (P7340A)
TR: 10/90 <70 ps*, 20/80 <50 ps 10/90 <100 ps*, 20/80 <75 p
Loading: Z
290 Ω to6GHz Z
MIN
290 Ω to4GHz
MIN
Best overall signal fidelity. The small resistors are ideal for
connecting to small vias and fine pitch circuitry.
*Guaranteed
Medium Flex, Large Resistor, 1/8 W P/N 020-2603-XX
Tip-Clip Assembly
Bandwidth: >8.0 GHz (P7380A)
T
: 10/90 <55 ps,20/80 <35 ps
R
Loading: Z
260 Ω to8GHz
MIN
Bandwidth: >5.0 GHz (P7360A) >4.0 GHz (P7340A)
: 10/90 <70 ps, 20/80 <50 ps 10/90 <100 ps, 20/80 <75 ps
T
R
Loading: Z
260 Ω to6GHz Z
MIN
260 Ω to4GHz
MIN
Good compromise between ease-of-use and performance when
attaching to larger devices.
Long Flex, Large Resistor, 1/8 W P/N 020-2605-XX
Tip-Clip Assembly
Bandwidth: >7.0 GHz (P7380A)
: 10/90 <75 ps, 20/80 <40 ps
T
R
Loading: Z
300 Ω to8GHz
MIN
Medium Flex, Small Resistor, P/N 020-2602-XX
Tip-Clip Assembly
Bandwidth: >7.0 GHz (P7313 & P7380A)
TR: 10/90 <55 ps, 20/80 <35 ps
Loading: Z
290 Ω to8GHz
MIN
Bandwidth: >5.0 GHz (P7360A) >4.0 GHz (P7340A)
: 10/90 <70 ps, 20/80 <50 ps 10/90 <100 ps, 20/80 <75 ps
T
R
Loading: Z
290 Ω to6GHz Z
MIN
290 Ω to4GHz
MIN
Good compromise between ease-of-use and maximum performance
when attaching to smaller devices or circuit board vias.
Long Flex, Small Resistor, P/N 020-2604-XX
Tip-Clip Assembly
Bandwidth: >6.0 GHz (P7313 & P7380A)
TR: 10/90 <130 ps, 20/80 <40 ps
Loading:Z
360 Ω to8GHz
MIN
Bandwidth: >4.0 GHz (P7360A) >4.0 GHz (P7340A)
TR: 10/90 <130 ps, 20/80 <60 ps 10/90<100ps, 20/80<75ps
Loading: Z
360 Ω to6GHz Z
MIN
360 Ω to4GHz
MIN
Extended reach with good step response. Useful for connecting
to hard-to-reach circuitry with large features. Conveniently sized
to fit between DIMM modules. Not recommended for signals
faster than 4 GHz.
*P001138904*
001-1389-04
Extended reach with good step response. Useful for connecting to
hard-to-reach small vias and fine pitch circuitry. Conveniently sized
to fit between DIMM modules. Not recommended for signals faster
than4GHz.
Page 2
P7313, P7380A, P7360A, and P7340A Probe Accessory Reorder List and Performance Summary (Con’t)
P7313 020-2636-XX
P7380A 020-2557-XX
P7360A and P7340A 020-2690-XX
Replacement Attachment Kit
Includes 3 each of the Tip-Clip assemblies listed
on the front page (unless noted otherwise), 3 Tip-
Clip Ejectors, Tip-Clip Tape, and Color Marker
Band Kit. Complete with Plastic Accessory Box.
Wire Replacement Kit, P7313 only.
016-1953-XX
Attachment Kit
Velcro fastening
straps and 10 dots
015-0717--XX
HHA Housing
One pair of Handheld Adapter
housings.
016-1948-XX
Color Marker Band Kit
5 colors
020-2644-XX
Wire Replacement Kit
(P7313 Only)
Set of three bobbins, solder, 4 mil wire,
and 8 mil wire. Use to replace wire
leads on the HBW Tip--Clip assemblies.
Note: See your technical reference
manual for additional Tip-Clip performance information and your user
manual for a list of the standard accessories included with the probe.
020-2596-XX
Variable Spacing Tip-Clip
(3 ea)
Bandwidth: >6.0 GHz
: 10/90 <70 ps, 20/80 <50 ps
Variable Spacing Tip-Clip Assembly
Bandwidth: >8.0 GHz (P7313 and P7380A)
TR: 10/90 <55 ps, 20/80 <35 ps
Loading: Z
220 Ω to8GHz
MIN
Bandwidth: >6 GHz (P7360A)
TR: 10/90 <70 ps, 20/80 <50 ps
Loading: Z
220 Ω to6GHz
MIN
T
R
Use the Square Pin Tip-Clip assembly
for probing 0.025-in diameter square
pins spaced 0.1-in on center. Square
pins are not an ideal transmission
path for high-speed electrical signals.
Square pins are not recommended for
signals faster than 100 ps or 3 GHz.
Bandwidth: >4 GHz (P7340A)
TR: 10/90 <100 ps, 20/80 <75 ps
Loading: Z
220 Ω to4GHz
MIN
Use with Handheld Adapter for probing
test points spaced from 0.020-in to 0.180-in apart.
For current product information, visit www.tektronix.com/accessories.
020-2701--XX
Square Pin, Tip-Clip Kit
(3 ea)
Note: All Tip-Clip specifications are
typical unless indicated otherwise, and
all loading is differential. The accessories and quantities in these reorder
kits may differ from those shipped with
the probe.
Loading...