P7313, P7380A, P7360A, and P7340A Probe Accessory Reorder List and Performance Summary
All Tip-ClipRassemblies include 10 Tip-Clips, 3 Tip-Clip Ejectors and 1 strip of Adhesive Tip-Clip Tape (10 pieces), unless otherwise noted.
HBW Straight Flex, 8 mil wire, P/N 020-2639-XX (Qty 10)
Tip-Clip Assembly P/N 020-2657-XX (Qty 5)
Bandwidth: >12.5 GHz (P7313)
TR: 10/90 <40 ps*, 20/80 <25 ps
Loading: Z
>200 Ω to 10 GHz
MIN
Highest bandwidth and best probe loading for HBW Tip-Clip
assemblies. Using the Wire Replacement Kit allows you the
flexibility to solder 8 mil or 4 mil wires to small vias.
*Guaranteed
Short Flex, Large Resistor, 1/8 W P/N 020-2601-XX
Tip-Clip Assembly
Bandwidth: >8.0 GHz (P7380A)
T
: 10/90 <55 ps, 20/80 <35 ps
R
Loading: Z
290 Ω to8GHz
MIN
High bandwidth and good signal fidelity, ideal
for connecting to large features.
HBW Right-Angle Flex, 8 mil
wire,Tip-Clip Assembly
P/N 020-2638-XX (Qty 10)
P/N 020-2656-XX (Qty 5)
Bandwidth: >12 GHz (P7313)
T
: 10/90 <42 ps, 20/80 <27 ps
R
Loading: Z
>150 Ω to 10 GHz
MIN
Provides an alternative connection orientation. Using the Wire
Replacement Kit allows you the flexibility to solder 8 mil or 4 mil
wires to small vias.
Short Flex, Small Resistor, P/N 020-2600-XX
Tip-Clip Assembly
Bandwidth: >8.0 GHz (P7313 and P7380A)
TR: 10/90 <55 ps*, 20/80 <35 ps
Loading: Z
290 Ω to8GHz
MIN
Bandwidth: >6.0 GHz (P7360A) >4.0 GHz (P7340A)
TR: 10/90 <70 ps*, 20/80 <50 ps 10/90 <100 ps*, 20/80 <75 p
Loading: Z
290 Ω to6GHz Z
MIN
290 Ω to4GHz
MIN
Best overall signal fidelity. The small resistors are ideal for
connecting to small vias and fine pitch circuitry.
*Guaranteed
Medium Flex, Large Resistor, 1/8 W P/N 020-2603-XX
Tip-Clip Assembly
Bandwidth: >8.0 GHz (P7380A)
T
: 10/90 <55 ps,20/80 <35 ps
R
Loading: Z
260 Ω to8GHz
MIN
Bandwidth: >5.0 GHz (P7360A) >4.0 GHz (P7340A)
: 10/90 <70 ps, 20/80 <50 ps 10/90 <100 ps, 20/80 <75 ps
T
R
Loading: Z
260 Ω to6GHz Z
MIN
260 Ω to4GHz
MIN
Good compromise between ease-of-use and performance when
attaching to larger devices.
Long Flex, Large Resistor, 1/8 W P/N 020-2605-XX
Tip-Clip Assembly
Bandwidth: >7.0 GHz (P7380A)
: 10/90 <75 ps, 20/80 <40 ps
T
R
Loading: Z
300 Ω to8GHz
MIN
Medium Flex, Small Resistor, P/N 020-2602-XX
Tip-Clip Assembly
Bandwidth: >7.0 GHz (P7313 & P7380A)
TR: 10/90 <55 ps, 20/80 <35 ps
Loading: Z
290 Ω to8GHz
MIN
Bandwidth: >5.0 GHz (P7360A) >4.0 GHz (P7340A)
: 10/90 <70 ps, 20/80 <50 ps 10/90 <100 ps, 20/80 <75 ps
T
R
Loading: Z
290 Ω to6GHz Z
MIN
290 Ω to4GHz
MIN
Good compromise between ease-of-use and maximum performance
when attaching to smaller devices or circuit board vias.
Long Flex, Small Resistor, P/N 020-2604-XX
Tip-Clip Assembly
Bandwidth: >6.0 GHz (P7313 & P7380A)
TR: 10/90 <130 ps, 20/80 <40 ps
Loading:Z
360 Ω to8GHz
MIN
Bandwidth: >4.0 GHz (P7360A) >4.0 GHz (P7340A)
TR: 10/90 <130 ps, 20/80 <60 ps 10/90<100ps, 20/80<75ps
Loading: Z
360 Ω to6GHz Z
MIN
360 Ω to4GHz
MIN
Extended reach with good step response. Useful for connecting
to hard-to-reach circuitry with large features. Conveniently sized
to fit between DIMM modules. Not recommended for signals
faster than 4 GHz.
*P001138904*
001-1389-04
Extended reach with good step response. Useful for connecting to
hard-to-reach small vias and fine pitch circuitry. Conveniently sized
to fit between DIMM modules. Not recommended for signals faster
than4GHz.
P7313, P7380A, P7360A, and P7340A Probe Accessory Reorder List and Performance Summary (Con’t)
P7313 020-2636-XX
P7380A 020-2557-XX
P7360A and P7340A 020-2690-XX
Replacement Attachment Kit
Includes 3 each of the Tip-Clip assemblies listed
on the front page (unless noted otherwise), 3 Tip-
Clip Ejectors, Tip-Clip Tape, and Color Marker
Band Kit. Complete with Plastic Accessory Box.
Wire Replacement Kit, P7313 only.
016-1953-XX
Attachment Kit
Velcro fastening
straps and 10 dots
015-0717--XX
HHA Housing
One pair of Handheld Adapter
housings.
016-1948-XX
Color Marker Band Kit
5 colors
020-2644-XX
Wire Replacement Kit
(P7313 Only)
Set of three bobbins, solder, 4 mil wire,
and 8 mil wire. Use to replace wire
leads on the HBW Tip--Clip assemblies.
Note: See your technical reference
manual for additional Tip-Clip performance information and your user
manual for a list of the standard accessories included with the probe.
020-2596-XX
Variable Spacing Tip-Clip
(3 ea)
Bandwidth: >6.0 GHz
: 10/90 <70 ps, 20/80 <50 ps
Variable Spacing Tip-Clip Assembly
Bandwidth: >8.0 GHz (P7313 and P7380A)
TR: 10/90 <55 ps, 20/80 <35 ps
Loading: Z
220 Ω to8GHz
MIN
Bandwidth: >6 GHz (P7360A)
TR: 10/90 <70 ps, 20/80 <50 ps
Loading: Z
220 Ω to6GHz
MIN
T
R
Use the Square Pin Tip-Clip assembly
for probing 0.025-in diameter square
pins spaced 0.1-in on center. Square
pins are not an ideal transmission
path for high-speed electrical signals.
Square pins are not recommended for
signals faster than 100 ps or 3 GHz.
Bandwidth: >4 GHz (P7340A)
TR: 10/90 <100 ps, 20/80 <75 ps
Loading: Z
220 Ω to4GHz
MIN
Use with Handheld Adapter for probing
test points spaced from 0.020-in to 0.180-in apart.
For current product information, visit www.tektronix.com/accessories.
020-2701--XX
Square Pin, Tip-Clip Kit
(3 ea)
Note: All Tip-Clip specifications are
typical unless indicated otherwise, and
all loading is differential. The accessories and quantities in these reorder
kits may differ from those shipped with
the probe.
Loading...