Tektronix P6864 User manual

Instructions

P6864
High Density 4X Logic Analyzer
Probe Label

071-1313-00

*P071131300*

071131300

P6864 High Density 4X Logic Analyzer
Probe Label

These instructions provide a detailed description of how to attach
probe labels to your Tektronix P6864 High Density 4X Logic
Analyzer Probe. Tektronix also provides additional labels for
customizing the probe (see Figure 1-1).

Attaching Probe Labels

NOTE. Always use flat-nosed tweezers to remove the labels from the
sheet of labels. Peeling the label can stretch and distort i t. To avoid
stretching the label, always grasp it from the top right corner while
removing it from the sheet of labels.

NOTE. The adhesive on the vinyl labels is extremely strong. Carefully
align the label to the indented outline on the module end and way
stations before attaching it to the probe. Once labels are placed on
the probe, they become very difficult to remove.

You will be attaching labels to both module ends and both sides of
the probe head. Refer to Figure 1 and Figure 2 while attaching the
probe labels.

Copyright © Tektronix, Inc. All rights reserved.

1