Tektronix P6330, P7330 User manual

P6330/P7330 Probe
Prototype Adapter
Instructions

Accessory Adapters

CAUTION. Do not remove the probe tip when

attaching adapters.

TwinFoot adapter (4 each). The TwinFoot adapter

connects to the probe through the square pin
adapter.

071-1030-00

CAUTION. The square pin

adapters shipped with this kit
are prototype versions only.
You may have to reposition or
apply slight pressure to the
square pin adapters to ensure
a reliable connection.

*P071103000*

071103000

CAUTION. Always use a wrist strap

(provided with your probe), and work at a
static-approved workstation when handling
the probe.

Square pin adapter (4 each). Push the square pin

adapter onto the probe tip until it seats against the
probe head. Use the square pin adapter to connect
the probe to other accessories, such as the Y-lead
adapter or TwinFoot adapter.

NOTE. The square pin adapters shipped with

this kit are prototype versions only. You may
have to reposition or apply slight pressure to
the adapter to ensure a reliable connection.

Use the TwinFoot adapter to probe two adjacent
leads on a surface-mount integrated circuit. The
TwinFoot adapter connects to the probe through
the square pin adapter. Flexible fingers adapt to a
range of lead spacings.

Tektronix part number: 016-1785-00
(package of 4)

Y-lead adapter (2 each). The Y-lead adapter connects

to the probe through the square pin adapter.

The socketed ends of the leads may be connected
to accessories, or fitted onto 0.025-inch square
pins.

Tektronix part number: 196-3468-00
(package of 2)

Copyright  Tektronix, Inc.

Seated

against probe

head

CAUTION. To avoid damaging the square pin

connectors, do not insert anything larger
than a 0.025-inch square pin into the
inputs.

The elastomeric contacts inside the adapter
are rated for 50 – 75 insertion cycles with
the probe tip. Replace the adapter after
exceeding these limits to avoid unreliable
operation.

WARRANTY SUMMARY

Tektronix warrants that the products that it
manufactures and sells will be free from defects in
materials and workmanship for a period of one (1)
year from the date of shipment from an authorized
Tektronix distributor. If a product or CRT proves
defective within the respective period, Tektronix
will provide repair or replacement as described in
the complete warranty statement.

To arrange for service or obtain a copy of the
complete warranty statement, please contact your
nearest Tektronix sales and service office.

EXCEPT AS PROVIDED IN THIS SUMMARY
OR THE APPLICABLE WARRANTY
STATEMENT, TEKTRONIX MAKES NO
WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING WITHOUT
LIMITATION THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE. IN NO EVENT
SHALL TEKTRONIX BE LIABLE FOR
INDIRECT, SPECIAL OR CONSEQUENTIAL
DAMAGES.