Tektronix P5910 User manual
xx
P5910
ZZZ
General Purpose Logic Analyzer Probe
Instruction Manual
www.tektronix.com
P077063501*
*
077-0635-01
Copyright © Tektronix. All rights reserved. Licensed software products are owned by Tektronix or its subsidiaries
or suppliers, and are protected by national copyright laws and international treaty provisions.
Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication
supersedes that in all previously published material. Specifications and price change privileges reserved.
TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.
Contacting Tektronix
Tektronix, Inc.
14150 SW Karl Braun Drive
P.O. Box 500
Beaverto
USA
For product information, sales, service, and technical support:
n, OR 97077
In North America, call 1-800-833-9200.
Worl dwid e, visi t www.tektronix.com to find contacts in your area.
Warranty
Tektronix warrants that this product will be free from defects in materials and workmanship for a period of one (1)
year from the date of shipment. If any such product proves defective during this warranty period, Tektronix, at its
option, either will repair the defective product without charge for parts and labor, or will provide a replacement
in exchange for the defective product. Parts, modules and replacement products used by Tektronix for warranty
work may be n
the property of Tektronix.
ew or reconditioned to like new performance. All replaced parts, modules and products become
In order to o
the warranty period and make suitable arrangements for the performance of service. Customer shall be responsible
for packaging and shipping the defective product to the service center designated by Tektronix, with shipping
charges prepaid. Tektronix shall pay for the return of the product to Customer if the shipment is to a location within
the country in which the Tektronix service center is located. Customer shall be responsible for paying all shipping
charges, duties, taxes, and any other charges for products returned to any other locations.
This warranty shall not apply to any defect, failure or damage caused by improper use or improper or inadequate
maintenance and care. Tektronix shall not be obligated to furnish service under this warranty a) to repair damage
result
b) to repair damage resulting from improper use or connection t o incompatible equipment; c) to repair any damage
or malfunction caused by the use of non-Tektronix supplies; or d) to service a product that has been modified or
integrated with other products when the effect of such modification or integration increases the time or difficulty
of servicing the product.
THIS WARRANTY IS GIVEN BY TEKTRONIX WITH RESPECT TO THE PRODUCT IN LIEU OF ANY
OTHER WARRANTIES, EXPRESS OR IMPLIED. TEKTRONIX AND ITS VENDORS DISCLAIM ANY
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
TRONIX' RESPONSIBILITY TO REPAIR OR REPLACE DEFECTIVE PRODUCTS IS THE SOLE
TEK
AND EXCLUSIVE REMEDY PROVIDED TO THE CUSTOMER FOR BREACH OF THIS WARRANTY.
TEKTRONIX AND ITS VENDORS WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL,
OR CONSEQUENTIAL DAMAGES IRRESPECTIVE OF WHETHER TEKTRONIX OR THE VENDOR HAS
ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.
[W2 – 15AUG04]
btain service under this warranty, Customer must notify Tektronix of the defect before the expiration of
ing from attempts by personnel other than Tektronix representatives to install, repair or service the product;
Table of Contents
General safety summary ...................... ................................ .................................. .. iii
Service safety summary............................................................................................ v
Compliance information .......................................................................................... vi
Safety comp
Environmental considerations .............................................................................. vii
Preface .............................................................................................................. ix
Related documentation......................... ................................ .............................. ix
Operating basics ..................... ................................ ................................ ............... 1
Product description ..................... ................................ ................................ ....... 1
P5910 pr
Probe label overview ................. .................................. ................................ ....... 3
Apply the labels to the probe .............. ................................ .................................. . 4
Accessory kit information ........... ................................ .................................. ....... 5
Install the probe grouper ..... .................................. ................................ ............... 7
Connect the probe to the instrument................ .................................. ....................... 8
ect the probe to the SUT ........... .................................. ................................ ... 9
Conn
Reference ............... .................................. ................................ .......................... 11
Probe footprints............................................................................................... 11
Load model .................................................................................................... 12
Probe dimensions ......... ................................ ................................ .................... 13
Specifications........................ ................................ ................................ .......... 14
intenance........................................................................................................ 17
Ma
P5910 probe calibration information ............. .................................. ........................ 17
P5910 probe service strategy information ........... ................................ ...................... 17
Perform the functional check .................... ................................ ............................ 17
Inspect or clean the probe................ .................................. ................................ .. 18
Repackage the probe ......................................................................................... 18
Replaceable parts .................................................................................................. 19
Parts ordering information ................................................................................... 19
Glossary
Index
liance ............................................................................................ vi
obe accessory information ......................................................................... 2
P5910 General Purpose Probe Instruction Manual i
Table of Contents
List of Figure
Figure 1: Example of a sheet of P5910 probe labels .............. .................................. ........... 3
Figure 2: At
Figure 3: Accessory kit contents..................................... ................................ ............. 6
Figure 4: Install the probe leads through the probe grouper .............................. ..................... 7
Figure 5: Align the probe leads...... .................................. ................................ ........... 7
Figure 6: Slide the probe grouper over the leads and engage the retention tangs into the notches . ..... . . 7
Figure 7: Connect the probe to the logic analyzer . ................................ ............................. 8
Figure 8:
Figure 9: Dimensions of 8-channel probe footprint with probe grouper attached........................ .. 11
Figure 10: P5910 grouping footprint (16-data channels plus one clock).................................... 12
Figure 11: P5910 probe loading and equivalent circuit ........... ................................ ............ 12
Figure 12: P5910 probe dimensions....... ................................ ................................ ...... 13
List o
fTables
taching the probe labels ........ ................................ .................................. ... 5
Pin spacing between 8-channel groups and clock/qualifier leads................................. 11
s
Table 1: Accessory kit contents.............................. .................................. ................... 6
le 2: Mechanical and electrical s pecifications............ ................................ .................. 14
Tab
Table 3: Environmental specifications ........ ................................ .................................. 15
Table 4: Service options ............ ................................ ................................ .............. 17
ii P5910 General Purpose Probe Instruction Manual
General safety summary
General safet
To avoid fire or personal
injury
y summary
Review the fo
this product or any products connected to it.
To avoid pot
Only qualified personnel should perform service procedures.
While using this product, you may need to access other parts of a larger system.
Read the safety sections of the other component manuals for warnings and
cautions r
Ground the product. This product is indirectly grounded through the grounding
conductor of the mainframe power cord. To avoid electric shock, the grounding
conductor must be connected to earth ground. Before making connections to
the input or output terminals of the product, ensure that the product is properly
ground
Observe all terminal ratings. To avoid fire or shock hazard, observe all ratings
and ma
information before making connections to the product.
The i
ed.
nputs are not rated for connection to mains or Category II, III, or IV circuits.
llowing safety precautions to avoid injury and prevent damage to
ential hazards, use this product only as specified.
elated to operating the system.
rkings on the product. Consult the product manual for further ratings
Connect the probe reference lead to earth ground only.
Do not apply a potential to any terminal, including the common terminal, that
exceeds the maximum rating of that terminal.
Do not operate without covers. Do not operate this product with covers or panels
removed.
Do not operate with suspected failures. If you suspect that there is damage to this
product, have it inspected by qualified service personnel.
Avoid exposed circuitry. Do not touch exposed connections and components when
power is present.
P5910 General Purpose Probe Instruction Manual iii
General safety summary
Termsinthismanual
Symbols and terms on the
product
Do not operate i
Do not operate in an explosive atmosphere.
Keep product surfaces clean and dry.
These terms
WARNING. Warning statements identify conditions or practices that could result
in injury or loss of life.
CAUTION. Caution statements identify conditions or practices that could result in
damage to this product or other property.
These terms may appear on the product:
DANGER
the marking.
WARNI
read the marking.
CAUT
n wet/damp conditions.
may appear in this manual:
indicates an injury hazard immediately accessible as you read
NG indicates an injury hazard not immediately accessible as you
ION indicates a hazard to property including the product.
The following symbol(s) may appear on the product:
iv P5910 General Purpose Probe Instruction Manual
Service safety summary
Service safet
ysummary
Only qualifie
safety summary and the General safety summary before performing any service
procedures.
Do not service alone. Do not perform internal service or adjustments of this
product unless another person capable of rendering first aid and resuscitation is
present.
Disconnect power. To avoid electric shock, switch off the instrument power, then
disconnect the power cord from the mains power.
Use care when servicing with power on. Dangerous voltages or currents may exist
in this p
test leads before removing protective panels, soldering, or replacing components.
To avoi
d personnel should perform service procedures. Read this Service
roduct. Disconnect power, remove battery (if applicable), and disconnec t
d electric shock, do not touch exposed connections.
P5910 General Purpose Probe Instruction Manual v
Compliance information
Compliance in
Safety compliance
Equipment type
Safety class
Pollution
degree
description
formation
This section
instrument complies.
Test and measuring equipment.
Class 1 – grounded product.
A measure of the contaminants that could occur in the environment around
and within a product. Typically the internal environment inside a product is
considered to be the same as the external. Products should be used only in the
environ
Pollution Degree 1. No pollution or only dry, nonconductive pollution occurs.
Produc
located in clean rooms.
lists the safety and environmental standards with which the
ment for which they are rated.
ts in this category are generally encapsulated, hermetically sealed, or
ollution degree
P
tion Degree 2. Normally only dry, nonconductive pollution occurs.
Pollu
Occasionally a temporary conductivity that is caused by condensation must
be expected. This location is a typical office/home environment. Temporary
condensation occurs only when the product is out of service.
Pollution Degree 3. Conductive pollution, or dry, nonconductive pollution
that becomes conductive due to condensation. These are sheltered locations
where neither temperature nor humidity is controlled. The area is protected
from direct sunshine, rain, or direct wind.
Pollution Degree 4. Pollution that generates persistent conductivity through
conductive dust, rain, o r snow. Typical outdoor locations.
Pollution Degree 2 (as defined in IEC 61010-1). Note: Rated for indoor use only.
vi P5910 General Purpose Probe Instruction Manual
Environmental considerations
This section provides information about the environmental impact of the product.
Compliance information
Product end-of-life
handling
Restriction of hazardous
substances
Observe the f
Equipment recycling. Production of this equipment required the extraction and
use of natural resources. The equipment may contain substances that could be
harmful to the environment or human health if improperly handled at the product’s
end of life. To avoid release of such substances into the environment and to
reduce the
an appropriate system that will ensure that most of the materials are reused or
recycled appropriately.
This pr
scope of the 2002/95/EC RoHS Directive.
ollowing guidelines when recycling an instrument or component:
use of natural resources, we encourage you to recycle this product in
This symbol indicates that this product complies with the applicable European
Union re
on waste electrical and electronic equipment (WEEE) and batteries. For
information about recycling options, check the Support/Service section of the
Tekt r on
oduct is classified as Monitoring and Control equipment, and is outside the
quirements according to Directives 2002/96/EC and 2006/66/EC
ixWebsite(www.tektronix.com).
P5910 General Purpose Probe Instruction Manual vii
Compliance information
viii P5910 General Purpose Probe Instruction Manual
Loading...