P5205.
Features
Ordering Information
Pricing Information
Request a Quote
High Voltage Differential
Probes
P5200 * P5205 * P5210
Features
Bandwidths up to 100 MHz
●
Up to 5,600 V Differential (DC + pk AC)●
Up to 2,200 V Common (RMS)●
Overrange Indicator●
Safety Certified●
Switchable Attenuation●
Switchable Bandwidth Limit●
Applications
Floating Measurements
●
Switching Power Supply Design●
Motor Drive Design●
Electronic Ballast Design●
CRT Display Design●
Power Converter Design and Service●
Power Device Evaluation●
The P5200 can be used with any oscilloscope and enables users
to safely make measurements of floating circuits with their
oscilloscope grounded. The P5200 Active Differential Probe
converts floating signals to low voltage ground referenced
signals that can be displayed safely and easily on any ground
referenced oscilloscope.
P5200.
The P5210 is a Differential Probe that is capable of measuring
floating voltages up to 5,600 V (DC + pk AC) safely and has a
bandwidth up to 50 MHz. It is supplied with two sizes of hook
tips and has an overrange visual and oral indicator which warns
the user when they are exceeding the linear range of the probe.
It can be used with Tektronix TEKPROBE
TM
interface
oscilloscopes directly or with any oscilloscope with the use of
the 1103 TEKPROBE Power Supply.
P5210.
The P5205 is a 100 MHz Active Differential Probe capable of
measuring fast rise times of signals in floating circuits. This
1300 V differential probe can measure safely voltages in IGBT
circuits such as motor drives or power converters. It is
specifically designed to operate on Tektronix oscilloscopes with
TEKPROBE interface.
P5200.
P5205.
P5210.
Specifications P5200 P5205 P5210
Differential Voltage
DC + pk AC
1300 V 1300 V 5600 V
Bandwidth (-3 dB) 25 MHz 100 MHz 50 MHz
Common
Mode Voltage DC
+ pk AC
1300 V 1300 V 5600 V
Common
Mode Voltage
RMS CAT II
1000 V 1000 V 2200 V
Common
Mode Voltage
RMS CAT III
600 V 600 V 1000 V
Attenuation
(switchable)
50X/500X 50X/500X 100X/1000X
CMRR @
60 Hz/1 MHz
(typical)
80 dB/50 dB 80 dB/50 dB 80 dB/50 dB
Input R (each
input)
4 megaohm 4 megaohm 8 megaohm
Input C (each
input)
7 pF 7 pF 7 pF
Power Source AC wall adapter
TEKPROBE
®
TEKPROBE
Safety (all) UL3111-1/CSA1010.1/CSA1010.2.031/IEC61010-2-031/EN61010-2-031
Compatible
Products
ALL TDS400/500/600/700/
TDS3000/7054/7104 and
11000 Series
TDS400/500/600/700/
TDS3000/7054/7104 and
11000 Series
Top of Page
Features
Ordering Information
Pricing Information
Request a Quote
Tektronix Measurement products are
manufactured in ISO registered facilities.
49A-10733-4p561, 06/1997, 08/03/2000
© Copyright Tektronix, Inc | webmaster@tek.com | Privacy Policy
Loading...