HFS Series.
Features
Specs
Programmable Stimulus System
HFS9003 * HFS9009 * HFS9DG1 *
HFS9DG2
This product is discontinued.
View
alternative products
Check product support
Characteristics
Level Resolution - 0.01 V.
HIGH Level Accuracy - ±2% of level ±50 mV.
LOW Level Accuracy
of amplitude
Output Aberrations (200 ps after 50% pt.)
Overshoot: +15% +20 mV. Undershoot: 20 mV.
Time Base Performance
Frequency Range - 50 kHz to 630 MHz.
±50 mV.
status.
- ±
.
2% of HIGH level ±2%
-
10%
-
Frequency Resolution
value.
Frequency Accuracy
RMS Jitter - 15 ps ±0.05% of interval.
PHASE LOCK IN Frequency Range - 6 MHz to
630 MHz.
PHASE LOCK IN Amplitude Range
1.0 V
Output Frequency Range -
submultiple of PHASE LOCK IN frequency. Must
remain inside the allowed frequency range for
installed cards.
FRAME SYNC IN
PHASE LOCK IN external frequency reference.
p-p
.
- <
0.1% of programmed
- ±
1% of programmed value.
- 0.8 V to
Any 2n multiple or
- Initiates a burst when using
Output Edge Placement Performance
Channel Deskew Range - Minus 60 ns to 2.0 µs.
Channel Deskew Resolution -
1 ps.
DELAY Adjust Range
-
0 to 20
µ
s.
DELAY Adjust Resolution -
DELAY Accuracy - 1% ±50 ps.
WIDTH Adjust Range - 0 to 65,536 x one period.
WIDTH Adjust Resolution - 1 ps.
WIDTH Accuracy - HFS9DG1: 1% of width
±
50 ps; HFS9DG2: 1% of width +50 ps -250 ps.
Output Performance
HFS9DG1 HFS9DG2
Outputs
Maximum HIGH
level
Minimum LOW
level
Max p-p amplitude
4 differential
+5.00 V +5.50 V
1 ps.
4 single-ended
-
2.50 V
3.00 V 5.50 V
-
2.00 V
Min p-p amplitude
Output transition
time (20% to 80%)
Trigger Input Performance
Input Resistance - 50 Ohm.
Input Voltage Range
Programmable Threshold Range - 4.70 V to
+4.70 V.
Programmable Threshold Resolution - 100 mV.
Programmable Threshold Accuracy
±5% of level.
Minimum Input Pulse Width -
0.01 V
(10 mV)
< 250 p
(<
1 V
- ±
5 V maximum.
p-p
)
1 ns.
0.01 V
(10 mV)
variable
(800 ps to 6 ns)
- ±100 mV
Input Rise/Fall Time Requirement - <
Sensitivity
Power Requirements
Line Voltage Ranges
RMS, and 180 V AC to 250 V AC RMS; range
switched automatically for HFS9003 (factory
configured for HFS9009).
- <500 mV.
- 90 V AC to 130 V AC
10 ns.
Loading...