Tektronix HCTEK54 User manual

xx HCTEK54 Transit Case

The HCTEK54 is a ruggedized transit case specifically
designed to provide travel and storage protection. The case
protects instruments from shock, vibration, and moisture with
room for accessories, such as probes, adapters, and manuals.

The HCTEK54 case accommodates the following product
series:

MSO4000B, D PO4000B Series

MSO5000, DPO5000 Series

Other features include an air pressure equalization control valve
for use during air transport and
(locks not included).

The HCTEK54 consists of a heavy duty outer shell and an inner
layer of foam. The inner foam consists of a permanent ring of
foam and one removable foam piece.

HCTEK54
Transit Case

ZZZ

Instructions

HCTEK54 specifications

Material/Color: Ultra-High Impact Polypropylene/Black, Polyurethane
foam lining

Shipping Weight (with foam) 24.62 lbs. (11.17 kg)

Length Width HeightExterior

24.64 inches
(62.6 cm)

*P07

071-2828-00

x

1282800*

Dimensions

security rings for use with locks

19.39 inches
(49.2 cm)

13.78 inches
(35 cm)

Warranty

Tektronix warrants that the product will be free from defects
in materials and workmanship for a period of three (3) months
from the date of original purchase from an authorized Tektronix
distributor. If the product proves defective during this warranty
period, Tektronix, at its option, either will repair the defective
product without charge for parts and labor, or will provide a
replacement in exchange for the defective product. Batteries are
excluded from this warranty. Parts, modules and replacement
products used by Tektronix for warranty work may be new or
reconditioned to like new performance. All replaced parts,
modules and products become the property of Tektronix.

In order to obtain service under this warranty, Customer
must notify Tektronix of the defect before the expiration of
the warranty period and make suitable arrangements for the
performance of service. Customer shall be responsible for
packaging and shipping the defective product to the service
center designated by Tektronix, shipping charges prepaid, and
with a copy of customer proof of purchase. Tektronix shall pay
for the return of the product to Customer if the shipment is to
a location within the country in which the Tektronix service
center is located. Customer shall be responsible for paying
all shipping charges, duties, taxes, and any other charges for
products returned to any other locations.

This warranty shall not apply
caused by improper use or improper or inadequate maintenance
and care. Tektronix shall n
under this warranty a) to repair damage resulting from attempts
by personnel other than Tek
repair or service the product; b) to repair damage resulting
from improper use or connec
c) to repair any damage or malfunction caused by the use of
non-Tektronix supplies; o
modified or integrated with other products when the effect of
such modification or inte
of servicing the product.

THIS WARRANTY IS GIVEN BY TEKTRONIX WITH
RESPECT TO THE PRODUCT IN LIEU OF ANY
OTHER WARRANTIES, EXPRESS OR IMPLIED.
TEKTRONIX AND ITS VENDORS DISCLAIM ANY
IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. TEKTRONIX’
RESPONSIBILITY TO REPAIR OR REPLACE DEFECTIVE
PRODUCTS IS THE SOLE AND EXCLUSIVE REMEDY
PROVIDED TO THE CUSTOMER FOR BREACH OF
THIS WARRANTY. TEKTRONIX AND ITS VENDORS
WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES
IRRESPECTIVE OF WHETHER TEKTRONIX OR THE
VENDOR HAS ADVANCE NOTICE OF THE POSSIBILITY
OF SUCH DAM AGES.

[W14 – 15AUG04]

to any defect, failure or damage

ot be obligated to furnish service

tronix representatives to install,

tion to incompatible equipment;

r d) to service a product that has been

gration increases the time or difficulty

Contacting Tektronix

Tektronix, Inc.

14150 SW Karl Braun Drive

P.O. Box 500

Beaverton, OR 97077

USA

For product information, sales, service, and technical support:

In North America, call 1-800-833

Worldwide, visit www.tektronix.com to find contacts in your
area.

-9200.

Using the HCTEK54 with MSO5000 and DPO5000 Series
Oscilloscopes

1. Open the transit case by unsnapping the four latches.

2. Fold the oscilloscope handle down.

3. With the oscilloscope pouch facing forward, place the

oscilloscope into the transit case.

4. Close the transit case and snap the four latches closed.

5. To secure the transit case, fasten a lock through the

security rings.

6. If the instrument is to be transported via aircraft, open
the air pressure control valve to allow for pressure
equalization.

Using t he HCTEK54 with MSO4000B and DPO4000B Series
Oscilloscopes

1. Open the transit case by unsnapping the four latches.

2. Remove the foam piece from the transit case.

3. With the oscilloscope handle in its

the oscilloscope into its soft case.

NOTE. The soft case (ACD4000B) is a

this system, and must be purchased separately.

4. Place the oscilloscope (and soft c

5. Close the transit case and snap the four latches closed.

6. To secure the transit case, fasten a lock through the

security rings.

7. If the instrument is to be trans
the air pressure control valve to allow for pressure
equalization.

up-right position, place

required component of

ase) into the transit case.

ported via aircraft, open

Copyright © Tektronix, Inc. All rights reserved. www.tektronix.com