Tektronix HC5 User Manual

xx

HC5
Transit Case

ZZZ

Instructions

*P071354501*

071-3545-01

x

HC5 Transit Case

The HC5 is a ruggedized, waterproof and dust tight
(MIL-C-4150J) transit case specifically designed to provide
travel and storage protection for the 5/6 Series MSO
instruments. The case protects instruments from shock,
vibration, and moisture. The case also has room for the
accessories pouch (for probes, adapters, and manuals).

Other features include an automatic air pressure equalization
control valve for use during air transport, and security rings for
use with locks (locks not included).

The HC5 consists of a heavy duty outer shell and an inner layer
of foam. The inner foam consists of a permanent ring of foam
and one removable foam piece.

HC5 specifications

Material/Color: Ultra-High Impact Polypropylene/Black, Polyurethane
foam lining

Shipping Weight (with foam) 24.62 lbs. (11.17 kg)

Exterior
Dimensions

Length Width Height

25.63 inches
(65.09 cm)

19.50 inches
(49.53 cm)

15.63 inches
(39.69 cm)

Warranty

Tektronix warrants that the product will be free from defects
in materials and workmanship for a period of three (3) months
from the date of original purchase from an authorized Tektronix
distributor. If the product proves defective during this warranty
period, Tektronix, at its option, either will repair the defective
product without charge for parts and labor, or will provide a
replacement in exchange for t he defective product. Batteries are
excluded from this warranty. Parts, modules and replacement
products used by Tektronix for warranty work may be new or
reconditioned to like new performance. All replaced parts,
modules and products become the property of Tektronix.

In order to obtain service under this warranty, Customer
must notify Tektronix of the defect before the expiration of
the warranty period and make suitable arrangements for the
performance of service. Customer shall be responsible for
packaging and shipping the defective product to the service
center designated by Tektronix, shipping charges prepaid, and
with a copy of customer proof of purchase. Tektronix shall pay
for the return of the product to Customer if the shipment is to
a location within the country in which the Tektronix service
center is located. Customer shall be responsible for paying
all shipping charges, duties, taxes, and any other charges for
products returned to any other locations.

This warranty shall not apply to any defect, failure or damage
caused by improper use or improper or inadequate maintenance
and care. Tektronix shall not be obligated to furnish service
under this warranty a) to repair damage resulting from attempts
by personnel other than Tektronix representatives to install,
repair or service the product; b) to repair damage resulting
from improper use or connection to incompatible equipment;
c) to repair any damage or malfunction caused by the use of
non-Tektronix supplies; or d) to service a product that has been
modified or integrated with other products when the effect of
such modification or integration increases the time or difficulty
of servicing the product.

THIS WARRANTY IS GIVEN BY TEKTRONIX WITH
RESPECTTOTHEPRODUCTINLIEUOFANY
OTHER WARRANTIES, EXPRESS OR IMPLIED.
TEKTRONIX AND ITS VENDORS DISCLAIM ANY
IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. TEKTRONIX'
RESPONSIBILITY TO REPAIR OR REPLACE DEFECTIVE
PRODUCTS IS THE SOLE AND EXCLUSIVE REMEDY
PROVIDED TO THE CUSTOMER FOR BREACH OF
THIS WARRANTY. TEKTRONIX AND ITS VENDORS
WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES
IRRESPECTIVE OF WHETHER TEKTRONIX OR THE
VENDOR HAS ADVANCE NOTICE OF THE POSSIBILITY
OF SUCH DAMAGES.

Contacting Tektronix

Tektronix, Inc.

14150 SW Karl Braun Drive

P.O. Box 500

Beaverton, OR 97077

USA

For product information, sales, service, and technical support:

In North America, call 1-800-833-9200.

Worldwide, visit www.tektronix.com to find contacts in your
area.

Rotating the handle

CAUTION.

instrument. Do not hold the handle from the sides and
rotate, as this can pinch the base of your thumb between the
handle and the case.

If you have routed any cables between the handle and the
case, be careful when rotating the handle so that you do
not pinch the cables.

Hold the top of the handle to carry the

Remove the pouch from the front cover, install the cover Pack the oscilloscope in the transit case

Unpack the oscilloscope

To remove the oscilloscope from the case, grab the handle and
pull and rotate the oscilloscope up and out from the foam liner.

Copyright © Tektronix, Inc. All rights reserved. www.tek.com