xx
DSA83UP
Instrument Upgrades for the
ZZZ
DSA8300 Digital Serial Analyzer
Instructions
www.tek.com
P075103703*
*
075-1037-03
Copyright © Tektronix. All rights reserved. Licensed software products are owned by Tektronix or its subsidiaries
or suppliers, and are protected by national copyright laws and international treaty provisions.
Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication
supersedes that in all previously published material. Specifications and price change privileges reserved.
TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.
Contacting Tektronix
Tektronix, Inc.
14150 SW Karl Braun Drive
P.O. Box 5 0 0
Beaverto
USA
For product information, sales, service, and technical support:
n, OR 97077
In North America, call 1-800-833-9200.
Worldwide, visit www.tek.com to find contacts in your area.
DSA83UP kit instructions
This kit describes how to install and activate available upgrades for the DSA8300
Digital Serial Analyzer instrument.
Available upgra des:
Option ADDJNB01 (Upgrade 80SJNB Essentials to 80SJNB01)
Option ADVTRIG (Advanced Trigger)
Option JARB (Jitter Analysis on Arbitrary Data)
Kit parts list
Option JN
Option JNB01 (Jitter, Noise and BER Analysis as well as Serial Data Link
Analysi
Option 400G-M4 (4-channel Transmitter and Dispersion Eye Closure
Quatern
Option HDD8 (replacement hard disk drive)
Quantity Description Part number
1
1
1
B (Jitter, Noise and BER Analysis)
s)
ary (TDECQ) analysis software)
DS83UP Kit Instructions (this document)
DSA8300 Jitter Analysis software CD
HDD8 hard disk d rive (Opt HDD8 order only)
075-1
063-
HDD8
037-XX
4393-XX
DSA8300 Instrument Upgrade Instructions 1
DSA83UP kit instructions
Upgrade options
NOTE. Tektronix recommends updating the TekScope application software to the
latest versio
your instrument with the version available from the Tektronix website for your
instrument. If a newer version is available, download and install.
n available. Compare the TekScope application version number of
Option ADDJNB01
Option ADVTRIG
Option JARB
Option ADDJNB01 consists of a keycode to enable the 80SJNB Advanced
software applications.
Option ADDJNB01 upgrades oscilloscopes currently running the 80SJNB
Essentials (Option JNB) Application software to 80SJNB Advance d.
Option ADVTRIG c onsists of a keycode to enable the Advanced Trigger software
functions.
Option ADVTRIG enables advanced triggering for synchronous acquisition
of repetitive patterns with lengths from 2 to 2
need to provide a pattern trigger. The instrument requires this option to use the
clock/pattern trigger source/mode and to run the 80SJNB (Jitter, Noise and BER
Analysis) software applications.
Option JARB consists of a keycode to enable the 80SJARB application software.
Option JARB enables the 80SJARB Basic Jitter Analysis on Arbitrary Data
software application. This application is a basic jitter measurement tool capable
of measuring jitter on any random or repetitive waveform. The acquisition
method uses simple decomposition, which limits analysis. Repeatability is pattern
dependent.
23
(8,388,608) bits, without the
Option JNB
Option JNB01
2 DSA8300 Instrument Upgrade Instructions
Option JNB consists of a keycode to enable the 80SJNB Essentials application
software.
Option JNB enables the 80SJNB Essentials software application for DSA8300
instruments. This application software offers a complete analysis of jitter, noise,
and BER, with decomposition of components for a clear understanding of a
signal’s problems and margins. The acquisition methodology requires a repetitive
pattern and the presence of option ADVTRIG in the DSA8300. Both accuracy
and repeatability are improved relative to the 80SJARB application because the
tool has access to the complete signal pattern. Installing this option on a DSA8300
also enables the 80SJARB application.
Option JNB01 consists of a keycode to enable the 80SJNB01 Advanced
application software.
DSA83UP kit instructions
Option JNB01 en
instruments. This application software offers a complete analysis of jitter,
noise, and BER, with decomposition of components for a clear understanding
of a signal’s problems and margins. In addition, the 80SJNB Advanced option
adds features to the 80SJNB Essentials software for serial data link analysis,
including fixture de-embedding, channel emulation, FFE/DFE equalization, and
is/de-emphasis. Installing this option on a DSA8300 also enables the
tion software. The hard drive capacity will be equal to or greater than
Option 400G-M4
Option HDD8
pre-emphas
80SJARB application.
Option 400G-M4 consists of a keycode to enable the 400G-M4 4-channel
Transmitter and Dispersion Eye Closure Quaternary (TDECQ) analysis PC
software to connect to the DSA8300 instrument.
OptionHDD8isaharddriveassemblyto replace the existing DSA8300 hard
drive. The drive includes the latest in-production instrument operating system and
applica
the drive that shipped with the product.
Installing jitter application software
1. Power on the instrument and wait until the DSA8300 TekScope application is
running.
ables the 80SJNB Advanced software application for DSA8300
2. Insert the DSA8300 Digital Serial Analyzer Jitter Analysis Software CD into
3. Click on the software to install (80SJNB or 80SJARB). Follow on-screen
4. Enable the option functionality (for purchased options). (See page 3, Enabling
Enabling a software option
1. Power on the instrument and wait until the DSA8300 TekScope application is
2. Click Utilities > Option Installation.
3. Click Continue.
4. Enter the option installation key and click Continue.
5. Click Restart Now to restart the instrument. The instrument must be restarted
6. Click Utilities > Option Installation and check that the option is listed in
the instrument media drive. The instrument opens the installation tool.
instructions to complete the installation.
a software option.)
running.
to enable the option.
the Enabled Options pane.
DSA8300 Instrument Upgrade Instructions 3
DSA83UP kit instructions
Installing option HDD8
NOTE. Save any user-generated files, that you want to copy to the new drive,
onto a network
the drive from the instrument
driveormemorydevice(USBmemory device) before removing
1. Power off th
2. Connect the instrument grounding strap to the front panel, and wear the
grounding
3. Loosen the two thumbscrews holding the hard disk drive (HDD) assembly
(located
4. Pull the HDD assembly from the instrument. Refer to your company or
organiz
5. Insert the new HDD8 drive in the instrument. Make sure that the assembly is
fully s
6. Tighten the thumbscrews.
7. Power on the instrument. Verify that instrument passes power-up diagnostics.
End of document
e instrument.
straponyourwrist.
at the upper-left corner of the back of the instrument).
ation requirements for moving, storing, or disposing of the old drive.
eated in the instrument.
4 DSA8300 Instrument Upgrade Instructions
Loading...