Tektronix DSA73304D Data Sheet

Digital and Mixed Signal Oscilloscopes

DPO/DSA/MSO70000 Series Data Sheet

Pinpoint®Triggering– Minimize time spent trying to acquire problem
signalsfor efficient troubleshootingand shortened deb ug time

Visual Trigger – Precisely qu alify triggers andfind unique events in
complex waveforms

6.25 Gb/s Real-time Serial Trigger – Assures triggering on the first
specified NRZ or 8b/10b pattern to allow isolation of

2

C, SPI, RS-232/422/485/UART, USB 2.0, andMIPI

upplies, and Memory – Enables standard-specific

SO70000 Series only)

Features & Benefits

Uncompromised Bandwidth– Up to 33 GHzand risetime as fast as
9 ps onall 4 channelsenables measurement on thelatest high-speed

andards

serial st
Industry-leading Sample Rateand Timing Resolution

100GS/s on 2Channels (33, 25, 20,16, and 12.5 GHzmodels)

instance of a
pattern-dependent effects

Search & Mark –Provides waveform orserialbus pattern matchingand
software triggers forsignals of interest

Automated Serial Triggeringand Decode Optionsfor 8b10b Encoded
Serial Data, I
D-PHY

P7500 TriMode™ Probing System – Perfectly matched signal
connectivity

ApplicationSupport for High-speedSerial Industry Standards, wideband
RF, Power S
certification, measurement automation,and ease ofuse

P6780,P6750, and P6717AHigh-performance 17-channel Logic Probes
with Bandwidths upto 2.5 GHzfor Connections toToday's Fast Digital
Signals (M

®

On All FourChannels Simultaneously

33, 25, 20, 16,12.5, 8, 6,and 4 GHzBandwidth Models
Up to 50GS/s Real-time Sample Rate
Up to 250 Megasample Record Length with MultiView Zoom™
Feature for Quick Navigation
FastestWaveform Capture Rate with>300,000 wfms/s Maximumper
Channel

Superior Signal Integrity andExcellent Signal-to-Noise Ratio –Observe
the truest representationof your waveform

16Logic Channels with80ps Timing Resolution forDebug of Digital and
Analog Signals (MSO70000Series only)

Applications

DesignVerificationincludingSignalIntegrity,Jitter,andTimingAnalysis
DesignCharacterization for High-speed,Sophisticated Designs
CertificationTestingof SerialData Streams forIndustryStandards
Memory Bus Analysisand Debug
Prototype Turn-on and PowerSupply Verification
Research and Investigation of TransientPhenomena
Production Testingof Complex Systems
Spectral Analysis of TransientorWide-bandwidth RF Signals

Data Sheet

P7500TriModeprobes simplify complex measurement setups.

P6780DifferentialLogic probes provide high-bandwidthconnectionsforup to 16 digital
signals.

Tools for Your Complete Design Cycle

Tektronix understands thatengineers rely on an oscilloscopethroughout
their design cycle, from prototype turn-on to production testing. The
DPO/DSA/MSO70000 Series oscilloscopes' uniquecapabilities combined

h exceptional signal acquisition performanceand analysisaccelerate

wit
your measurement tasks.

Unmatched Acquisition and Signal-to-Noise
Performance

The superior signal integrity and excellent signal-to-noise ratio ofthe
DPO/DSA/MSO7
results.

Highbandwidth, up to33 GHz, matchedacross 4 channels
Bandwidth enhancement eliminates imperfections in frequency

response all theway to the probe tip. User-selectable filters for each
channel prov
representation of extremely fast signals. In addition, only Tektronix
allowsthe user to disable the bandwidth enhancement forapplications
needing the

Simultaneous high sample rate onall channels captures more signal
details (transients, imperfections, fast edges)

100 GS/s on2 channels and50 GS/s on all analogchannels for the

12.5 through 33 GHz models
25GS/s on allanalogchannels for the4,6, and 8GHzmodels

12.5 GS/s on alllogic channels intheMSO70000 Series

Lowestjitter noise floorand highest verticalaccuracy provide additional
margin in your measurements

Long record length provides high resolution and extended-duration
waveform capture

Standard 10 MS per channel on the DPO70000 and MSO70000
Series and 31MS on theDSA70000 Series
Optional up to125 M S on all fourchannels forthe 4, 6, and 8GHz
models
Optional up to 250 MS on all four channels for the 12.5 through
33 GHz models
On the MSO70000 Series, the record length of logic channels
matches the analogrecord lengthsfor uncompromised analog and
digital acquisition
MultiView Zoom helps youmanage long records, compare and
analyze multiple waveform segments

With h
DPO/DSA/MSO70000 Series enable you to perform precise
characterization measurements. When debugging aDUT,alow noise

and maximum signal fidelityof the measurementinstrumentallows

floor
you to find the smallestanomalies affectingthe DUT's performance.
For RF signals, a lower noise floor translates into a higher dynamic

ge, opening the DPO/DSA/MSO70000 Seriesto a wider range of

ran
applications

WidestRange of ProbingSolutions – Whetheryou need tomeasure 8 Gb/s
serial data, fast digital logic, or switchingcurrents fromyour new power
supply design, Tektronixoffersa vast arrayof probing solutions, including

ive single-ended, differential,logic, high voltage,current, optical, anda

act
wide range ofprobe and oscilloscopeaccessories.

0000 Series ensuresconfidence inyour measurement

ides magnitude and phase correctionfor more accurate

highest measurement throughput

igh signal-to-noise ratio and low internal noise floor, the

2 www.tektronix.com

Digital and Mixed Signal Oscilloscopes —DPO/DSA/MSO70000Series

Quick Selection Guide

Model Analog Bandwidth

DPO70404C 4 GHz 25 GS/s 10 MS
DSA70404C 4 GHz 25 GS/s 31 MS
MSO70404C 4 GHz 25 GS/s 10 MS
DPO70604C 6 GHz 25 GS/s 10 MS
DSA70604C 6 GHz 25 GS/s 31 MS
MSO70604C 6 GHz 25 GS/s 10 MS
DPO70804C 8 GHz 25 GS/s 10 MS
DSA70804C 8 GHz 25 GS/s 31 MS
MSO70804C 8 GHz 25 GS/s 10 MS
DPO71254C 12.5 GHz 100 GS/s / 50 GS/s 10 MS
DSA71254C 12.5 GHz 100 GS/s / 50 GS/s 31 MS
MSO71254C 12.5 GHz 100 GS/s / 50 GS/s 10 MS
DPO71604C 16 GHz 100 GS/s / 50 GS/s 10 MS
DSA71604C 16 GHz 100 GS/s / 50 GS/s 31 MS
MSO71604C 16 GHz 100 GS/s /50 GS/s 10 MS
DPO72004C 20 GHz 100 GS/s / 50 GS/s 10 MS
DSA72004C 20 GHz 100 GS/s / 50 GS/s 31 MS
MSO72004C 20 GHz 100 GS/s /50 GS/s 10 MS
DPO72504D 25 GHz 100 GS/s / 50 GS/s 10 MS
DSA72504D 25 GHz 100 GS/s / 50 GS/s 31 MS
DPO73304D 33 GHz 100 GS/s / 50 GS/s 10 MS
DSA73304D 33 GHz 100 GS/s / 50 GS/s 31 MS

Analog Sample Rate

2/4 Channels

Standard Memory –

Analog + D igit al

Analog Channels Logic Channels

4
4
416
4
4
416
4
4
416
4
4
416
4
4
416
4
4
416
4
4
4
4

System Turn-on and Verification

Fromthetimeadesignisfirst powere d up through the initial operational
checks,the DPO/DSA/MSO70000 Seriesprovidethe features you need.

Uncompromised Four-channel Acquisition

With the industry's lowest noise and up to 50 GS/ssample rateon all
four channels theDPO70000 Series ensures that signal integrity checks
and timing analysis can bedone withoutworrying aboutnoise and jitter
in the scopedistorting the measurements. Single-shot bandwidths up to
>20 GHz on all four channels ensure that you'llcapture yoursignals of

st without worrying about undersampling whenusing more than1 or

intere
2 channels.

lications requiring the lowest internal noise and jitter, 100 GS/s

For app
performance f urther reduces noise and jitter andprovides additional
measurement headroom.

16-channel Digital Acquisition (MSO70000 Series only)

When you have many interfaces to verify, the MSO70000 Series with
4analog and 16logic channels enablesefficient channel-to-channel timing
checks. With timing resolution of 80 ps, the MSO7000 0 Series' digital

tionsystem enables you tomakeprecise timing measurements onas

acquisi
many as 20 channels simultaneously.

iCapture – One Connection for Analog and Digital
(MSO70000 Series only)

The number ofsignals that mustbe verified can oftenmake the checkout
of a design long and involved. Byusing the iCapture digital-to-analog
multiplexer feature, you can easily verifythe analog characteristicsof any
of the 16 signals connected to the MSO70000 Series' digital channels.

Capture, you can quicklyviewthe analog characteristicsofany input

Usingi
channel. If the signal isworking as expected, relegate it to adigital-only
view and continue testing otherlines.

www.tektronix.com 3

Data Sheet

Symbolicbu

10msdurationcapture of synchronoushigh-speedand low-speed signalsat25GS/s.

Bus Decoding and Triggering

Verifyingyour system operation often requiresthe abilityto see specific
system states on a key bus such as the DDR SDRAM interface. The
DPO/DSA/MSO70000 Series includes parallel and serial busdecoding
that provides deeper insight into the system's behavior. Using the bus
trigge
state needed orfind invalid bussequences isas easy asdefining the bus
and choosing the bit patternor symbolic word that describesthe desired
state. In addition, serial busdecoding for8b10b encoded data, I
RS-232/422/485/UART,USB, and M IPI
toidentify where controland data packet s beginand end aswellas identify
subpa

Deep R

Longer duration events such as power supply sequencing and system
statu
the long memory depths available on all four analog channels in the
DPO/DSA70000 Series as wellas the 16logic channels oftheMSO70000
Series. Optional memorydepths up to125 MS (Option10XL) on the4, 6,
and8 GHz modelsand 250 MS (Option20XL) on the12.5 through 33 GHz
models are available.

sformatssimplify identifying systemstatesand setting up bus triggers.

ringcapability of the DPO/DSA/MSO70000Series to isolate theexact

2

C,SPI,

®

DSIand CSI2 busesenables you

cket components suchas address, data, CRC,etc.

ecord Length Available on All Channels

s words can be analyzedwithout sacrificing timing resolutionusing

Visual Trigger.

Powersupplies can be acriticalfailure point in anysystem. Careful testing
ofthe power deliverysystem'spower on sequencecan be time consuming.
The MSO70000 Series provides independent logic thresholds for each
logic channel enablingmultiple logicvoltages to be set upand observed
simultaneously for quick verificationof the system'spower rails.

Protocol and Serial Pattern Triggering

Toverify serial architectures, the serial patterntriggeringfor NRZ serialdata
streams with built-in clock recovery in the DPO/DSA/MSO70000 Series
allowscorrelating events across physical andlink layers. The instruments
can recover the clocksignal, identify transitions, and all

ow you to set
the desired encoded words forthe s erial pattern trigger to capture. This
feature comes standard on theDSA70000 Series and is available on the
DPO70000 and MSO70000 Series as Option ST6G.For higherbit rate
standards like USB 3.0,the 8b10b serialpatterntrigger and decodecovers
data rates up to 6.25 Gb/s.

Pattern lock triggering adds an extra dimension to NRZ serial pattern
triggering by enablingthe o scilloscope to take synchronizedacquisitions
of a longserial test pattern with outstanding time baseaccuracy. Pattern
lock triggering can be used to remove random jitter fro m long serial
data patterns. Effects ofspecific bit transitions can be investigated, and
averaging can be used with ma sk testing. Pattern lock triggeringsupports
upto 6.25 Gb/sNRZ serial datastreams and is standardon the DSA70000
Seriesinstruments, or isincludedas part of OptionST6Gon the DPO70000
and MSO70000 Series.

Visual Trigger – Find the Signal of Interest Quickly

Finding the right cycleof a complex buscan require hoursof collecting and
sorting through thousands of acquisitions forthe event ofinterest. Defining
atrigger that isolates thedesired event and showsdataonly when theevent
occurs speeds up this process. Visual Triggermakes theidentification

desired waveform events quick and easy. Visual Triggerqualifies

of the
TektronixPinpoint Triggers by scanning through allwaveform acquisitions
and comparing them toon-screen areas (geometricshapes). With intuitive
on-screen controls, up to 8areas with a choice of shapes canbe dra wn
on-screen and combined in a trigger expression to find only the events
needed for verification and analysis.

4 www.tektronix.com

Digital and Mixed Signal Oscilloscopes —DPO/DSA/MSO70000Series

System Characterization and Margin Testing

Whena design isworking correctly andthenext task istofully characterize
its performance, the DSA70000 Series offers the industry's most
comprehensive setof analysis and certification tools, such as math
expressions,waveform mask testing,pass/fail testing, event searching,and
event marking
processof making hundredsof characterization measurements.

Advanced Waveform Analysis

Fullanalysis of thepower,voltage,and temperature cornersof your system
under test can bevery time consuming. TheDPO/DSA/MSO70000 Series
offera wide ran ge ofbuilt-in advanced waveformanalysistools.

Waveform cursors make it easy to measure trace-to-trace timing
characteristics, while cursorsthat link b etween YT and XYdisplay modes
make it easyto investigate phaserelationships and Safe Operating Area
violations. Select from 53 automatic measurements using a graphical
palette that logically organizes measurements into Amp litude, Time,
Histogram,
measurementresults with statisticaldata such as mean,min, max, standard
deviation, and population.

Define and a
in terms that you can use. Access common waveform math function s
with the touchof a button. Or,foradvanced applications, create algebraic
expressions consisting of live waveforms, reference waveforms, math
functions,measurement values, scalars,and user-adjustable variableswith
an easy-to-use calculator-style editor.

With deep acquisition memory, margin testing can be done over many
cycles and long duration trendsin the data can beobserved. Plus, data
from the oscilloscope canbecaptured into Microsoft Excelusing the unique
Excel tool
provided with the DPO/DSA/MSO70000 Series.

Automated Tools to Increase Measurement Throughput

Ease of useand measurement throughput are keywhen alarge number
of measurements must be completed with aperformance oscilloscope.

. Toolsforautomation redu ce the tedium andspeed up the

andCommunications categories. Gather furtherinsight into your

pplymath expressions towaveform data foron-screen results

bar,and formatted into custom reportsusing the Word toolbar

DPOJET Jit

concerns,
highestse

ter and Eye Diagram Analysis – Simplifyidentifyingsignalintegrity
jitter,and their related sourceswithDPOJETsoftware. DPOJET provides the
nsitivityandaccuracy available for real-timeoscilloscopes.

The DSA70000 Series comes standard withthe DPOJET AdvancedJitter
and Eye Diagrammeasurement application, providing thetools you need
to quickly performa high volume of measurements and collectstatistics.
DPOJET Essentials is standard on the DPO70000 and MSO70000
Series wi

th the DPOJET advanced version available as an opt ion.
Application-specific measurement packagesare also available thatextend
DPOJET and perform the extensive set of tests required by industry
standard groups.

RF and Vector Signal Analysis

When vector signal analysis of RF or baseband signals are needed
the optiona l SignalVu application enables measurements in multiple
domains (frequency, time, phase,modulation) simultaneously. SignalVu
measurements are fully correlatedwith the scope's timedomain acquisition

gering. Time domain events, such as commands to a RF

and trig
subsystem, can be usedas trigger events, whilethe subsystem's RF signal
can be seen in thefrequency dom ain.

www.tektronix.com 5

Data Sheet

TekExpres

USB 3.0 pro
and receiv
Universal
selection
selectio
USB-TXle

3.0 solut

TekExpress SATA Automated Compliance Test Software – Complete support forSATA
Gen1 and SATAGen2definedtestsuitesfortransmittersand receivers. Reduce your
compliancetesttime by approximately70%withsimple, efficientautomationof all required
testsuiteswith TekExpresssoftware. Alsoincludedis auto-recognition of allrequiredtest
equipment,preciseDUT/Hostcontrol, and one-button testing.

s USB 3.0 Automated Test Software (Option USB-TX) – TekExpress

videsanautomated,simple,andefficientwaytotestUSB3.0transmitter

er hosts and devices consistentwith the requirementsofthe SuperSpeed

SerialBusElectrical Compliance Test Specification. The applicationautomates

ofappropriateCTLE and reference channel emulationfiltersandmeasurement

ns basedondevicetype,test type, test points, and selectedprobes. In addition,

veragesDPOJETallowingfordebug and advanced characterization of USB

ions.

TekExpress®Software Automation Framework

ekExpress software automationframework has been developed for

The T
automated one-button testing of high-speed serial datastandards. Built
on top ofNational Instruments TestStand product, TekExpressefficiently
executes the required testsfor many serialstandards such asSATA,SAS,

SDLA - Serial Data Link Analysis (Option SLE and SLA) – Offers the capabilityto
emulatetheserialdata channel, de-embed a fixtureorothernetwork, and add or remove
equalization. Option SLA addsprocessingofwaveforms with FFE and DFEequalizations
and automaticequalizertraining. DPOJET provides advanced measurement and jitter
analysisof the resultingwaveforms.

MIPI®D-PHY,USB3.0, DisplayPort, and10GBASE-T Ethernet. Run onan
externalWindows PC, theTekExpresssoftware orchestrates theinstrument
setup and controlsequences to providecomplete testresultsfor complete
design validation.

Beyond using the TekExpressframework, custom applications that you
develop yourself using application development environments such as
MATLAB

®

can further extend the tool set of the DPO/DSA/MSO70000

Series.
Characterization measurements depend upon accuracy and

repeatability. The wide bandwidth and unmatched signal fidelity of the
DPO/DSA/MSO70000 analog front end ensuresthat your signal quality
measurements such as rise timesare faithful and amplitude correctwith
flatness of ±0.5dB.

Custom Filter and De-embed Capability

ate your own filters or use the filters provided as standard with the

Cre
DPO/DSA/MSO70000 Series toenhance your abilityto isolate orremove
a component of your signal (noise or specific harmonics of the signal).
Thesecustomizable FIR filterscan be usedto implement signal-processing
techniques,such as removingsignalpre-emphasis or minimizing theeffects
offixtures and cables connectedto the device undertest. Usingthe optional

ial Data LinkAnalysis (SDLA) application,you can gainfurther insight

Ser
into serial datalinks with thecapability to emulatethe serial datachannel
from its S-parameters, de-embed a fixture or other network, and addor
removetransmitter or receiverequalization(de-emphasis/pre-emphasis).

6 www.tektronix.com

Digital and Mixed Signal Oscilloscopes —DPO/DSA/MSO70000Series

Certification

Beforeaproductcangotomarket,youoftenneedtocompleteaseriesof
certification tests onthe industry-standard high-speed serialbuses in your
design. These tests caninvolve many hoursof wrestling withtest fixtures,
reading certifi
that your systempasses the required tests.

Application-specific Solutions – Enable
Standard-specificCertification, Measurement
Automation, and Extended Signal Analysis

Accurate,Simple,and Customizable Physical Layer CertificationTesting –
For designers with industry-standard certification needs,standard-specific
compliance a
mask and measurement limit testing are available as options on the
DPO/DSA/MSO70000 Series. Modules a re available for PCIExpress
DDR Memory, Serial ATA and SAS, InfiniBand, HDMI, Ethernet,
DisplayPort, DVI, UWB,MIPI
USB.

See the following list for highlights of the available application-specific
solutions.

cation documents, and collecting sufficientdata to validate

nd analysis modules that configurethe pass/fa il waveform

®

D-PHY and M-PHY, Power Supplies, and

®

,

USB 3.0 Transmitter Test Solution (Option USB3) – Perform verification,
characterization,anddebugofUSB3.0devices. Measurementsareimplementedin
DPOJETandarecomplianttotheUSB3.0specification. For compliance and automation,
USB-TX is available.

DDR Memory Bus Analysis (Option DDRA) – Automatically identify DDR1, LPDDR1,
LPDDR2,DDR2,DDR3,and GDDR3 Reads and WritesandmakesJEDEC conformance
measurementswithpass/failresults on all edges in everyReadandWriteburst. DDRA
providescapabilitiesfor measurements ofclock,address,and control signals. Inaddition
toenablingconformance testing DDRA withDPOJETisthe fastest way todebugcomplex
memory signalingissues. DDRAcanalsousetheCommand/Addresslinestotrigger
on specific read/write states when running on the MSO70000 SeriesMixedSignal
Oscilloscope,whichoffers 16 channels of digitallogicprobing.

PCI Express Analysis Test Solution (Option PCE3) – Analyze the performanceofyour
PCI ExpressRev1.0,2.0,or3.0(draftspec)designwith comprehensive test support.
UsingDPOJET, Option PCE3 enablesteststhatconform to PCI-SIG standards.

www.tektronix.com 7

Data Sheet

Ethernet C

Ethernetv
integrate
software,

MIPI

Verifyto the D-PHYspecificationby rapidly characterizinganddiscoveringsources of jitter
andsignalintegrityconcerns using the fully flexible and customizabletestsetup. Using
DPOJET, Option D-PHY enablestransmitterhigh-speed data-clock timingmeasurements,
alongwitha full range of electricalcharacteristics in high-speedorlow-power modes.

ompliance Test Solution (Option ET3) – Receive full PHY layer supportfor

ariants10BASE-T, 100BASE-TX, and 1000BASE-T with the comprehensive,

d Tektronix Ethernet tool set. Analog verification,automatedcompliance

anddevicecharacterizationsolutions are all included.

®

D-PHY Characterization and Analysis Solution Solution (Option D-PHY) –

MIPI®M-PHY Debug, Analysis, Characterization and Conformance Test Solution
(Option M-PHY) –VerifytotheM-PHYspecification by rapidly characterizing and

discoveringsourcesof jitter and signalintegrityconcerns. UsingDPOJET, Option M-PHY
enablestransmittersignaling and timing measurementssuchasdifferential transmiteye
diagrams,riseand fall times, slewrate,amplitude parameters, commonmodevoltageson
eachlaneforboth the large and smallamplitudeconfigurations,as well as theterminated
and unterminated cases.

0GBASE-T Automated Compliance Software – Quickly perform 10GBASE-T

XGbT 1

urementspertheIEEE802.3an-2006standard including Power Spectral Density

meas

), Power Level, and Linearity,with a simplified instrument configuration. XGbT

(PSD

idesflexiblecontrolover test configurations andanalysisparameters, enabling more

prov

epth device characterization.

in-d

8 www.tektronix.com

Digital and Mixed Signal Oscilloscopes —DPO/DSA/MSO70000Series

SFF-8431 SFP+ Compliance and Debug Solution (Option SFP-TX) – A comprehensive
automatedanddebugsolutionfor SFF-8431 SFP+ PHY and SFP+ Direct Attach Cable
Specifications “10GSFP+CU.”This option enables both an automated solution for
complianceandaDPOJETplug-infor debug. Testsetup and all measurements can be
donewithasinglebuttonclick, reducing test time. User-defined mode enables flexible
parametercontrolfor characterization and margin analysis.

DVI Compliance Test Solution (Option DVI) – Obtain quick and dependable results
withtheDVIcompliancetestsoftware. Automated testing based on pass/faildetection
dramaticallyenhancesproductivity.

HDMI Compliance Test Solution (Option HT3) –Afast,efficient solution for HDMI
compliancemeasurementchallenges, no matter if you are workingonaSource,Cable,
or Sink solution. Thisapplicationprovides all the HDMI compliance test solutions you
need to ensure qualityandinteroperability.

DisplayPort Compliance Test Solution (Option DSPT) – Supports DisplayPort
ComplianceTest Standard (CTS)sourcetestwith four-line simultaneoustestingusing the
TektronixP7300SMASeriesprobes and DisplayPort software. Detailedtest reports with
waveformplots,pass/failresults, and margin analysisareincluded.

www.tektronix.com 9

Data Sheet

Power Measurement and Analysis Software (Option PWR) –Improvetheefficiencyof
switchingpowersupplieswith increased power densities. Measureandanalyzepower
dissipationinpower supply switching devices and magneticcomponents,andgenerate
detailedtestreportsincustomizableformats.

®

SignalVu

as wideband radar,high data-rate satellite links, or frequency-hopping radios and
characterizewidebandspectral events. SignalVucombinesthefunctionality of a vector
signal analyzer,a spectrum analyzer, and the powerful triggering capabilities of the
DPO/DSA/MSO70000Series–allinasinglepackage.

Vector Signal Analysis – Easily verify wide-bandwidth designs such

DSA70000 – A Dedicated Solution Configured for
Today's High-speed Serial Design Challenges

TheDSA70000 Digital SerialAnalyzers are speciallyconfigured to address
high-speed serial data designsby encapsulating manyof the serial domain
features needed for high-speed serial verification and characterization.
These standard features on the DSA70000 Series are options o n the
DPO7000

0 and MSO70000 Series.

Communica

Serial Pattern Triggering – Real-time s erial pattern triggering andprotocol

tions Mask Testing.

decode with built-in clock recovery recovers the clock signal, identifies
the transitions, anddecodes characters and other protocoldata. Youcan
see the 8b/10b bit sequences decoded into their words for convenient

, or youcan set the desired encodedwords for the serial pattern

analysis
trigger to capture. With pattern lock triggering, theDSA70000 Series can
synchronizeto long serialtest patterns withdata rates upto 6.25 Gb/s and
remove random jitter.

DPOJET Ji

tter, Timing, and Eye Diagram Analysis –

TheDSA70000 Series
features the highest-accuracy jitter andtiming measurements as well as
comprehensive analysis algorithms. Tighttiming margins demand stable,
low-jitter designs. Youcan make jitter measurements over contiguous
clock cycles on every valid pulse in a single-shot acquisition. Multiple
measurements and trendplots quickly showsystem timing undervariable

ons, including Random,Deterministic, and Bounded Uncorrelated

conditi
Jitter separation.

Communications Mask Testing – Provides a complete portfolioofmasks for

verifyingcompliance to serialcommunications standards. Over 150 masks

ngthe following standardsare supported – PCIExpress,ITU-T/ANSI

includi
T1.102, Ethernet IEEE802.3, ANSIX3.263, Sonet/SDH, Fibre Channel,
InfiniBand, USB, Serial ATA, Serial AttachedSCSI, IEEE 1394b,RapidIO,
OIFStandards, Open BaseStationArchitecture Initiative (OBSAI),Common
Public Radio Interface (CPRI).

31 MS Record Length – 31MS on allfour channels providesa longer time

sequenceat high resolution. Optionalrecordlengths up to125 MS for the4,
6, and 8 GHzmodels, 250 MSfor the 12.5through 33 GHz modelsextend
the acquisition time sequence.

With standard fe atures that extend the functionality of the Tektronix
DPO70000 Series to address high-speed serial signal analysis and
certification, the DSA70000 Series offers a specialized instrument that

ntly addresses yourdesign challenges.

efficie

10 www.tektronix.com

Digital and Mixed Signal Oscilloscopes —DPO/DSA/MSO70000Series

DSA Feature Set in the M S O 7 00 0 0

If you need to combine the functionality of the DSA70000 and the
MSO70000 Series, theDSA options for theMSO70000 Series providethe
DSA's high-speed serial test features in anMSO (see Option DSAH or
DSAUin the Orde

ring Information sectionbelow).

User-selectable Bandwidth Limit Filters

While wide bandwidth is needed to characterizeyour high-speedserial
designs, certification testing can require a specificinstrument bandwidth
appropriate for the signal's data rate in order to correlate test results
between diffe
user-selectable bandwidt h limiting filters. Using these bandwidth limit
filters which range from 500 MHz to 32 GHz, you will ensure that your
measurement is done using the bandwidth specified by the industry
standard.

rent test labs. The DPO/DSA/MSO70000 Series feature

Debugging

Throughout the designcycle, DPO/DSA/MSO70000 Seriesoscilloscopes
provide the a
cause. Using FastAcq'shigh waveform capture rate, you can qu ickly
identifysignal anomalies thatoccur intermittently –saving minutes, hours,
or even days by quickly revealing the n ature of faults so sophisticated
trigger modes can be applied toisolate them. Using Pinpoint triggers,
infrequent events such asglitches or signal runtscaused by bus contention
orsignal in

bility to debug malfunctioning subsystems and isolate the

tegrityissues can becaptured, analyzed, and theneliminated.

B EventScanidentifiesspecificevents to build an eye diagram.

FastAcq – Expedites Debugging by Clearly Showing
Imperfecti

Morethan just colorgradingor event scanning,FastAcq'sproprietary DPX
acquisiti
persecond on allfour channels simultaneously, dramatically increasing the
probability of discovering infrequentfault events. Andwith a simpleturn of
theintensity knob youcan clearly “see aworld others don'tsee”, displaying
thecomplete picture ofyour circuit's operation. Someoscilloscope vendors
claim high waveform capture rates for short bursts of time, but only
DPO/DSA/M
candeliver these fastwaveform capture rateson a sustainedbasis.

ons

on technology capturessignals at morethan 300,00 0 waveforms

SO70000 Series oscilloscopes,enabled by DPXtechnology,

Pinpoint®Trigger

Whether you're tryingto find aproblem signal or need toisolate a section
of a complexsignal forfurther analysis, like a DDRRead orWrite burst,

x Pinpoint triggering provides the solution. The Pinpoint trigger

Tektroni
system uses SiliconGermanium (SiGe)technology to provide very high
trigger sensitivity withvery low trigger jitter andthe ability tocapture very
narrow glitches. Pinpoint triggering allowsselection of virtually all trigger
types on bothA and B trigger eventsdelivering the fullsuite of advanced
trigger types for finding sequential trigger events. Pinpoint triggers provide

eset capabilities that begin the triggersequence again after a

trigger r

®

Use B Event Scan triggeronDDRDQSedgesusedtoconstructaneyediagramof all
bits in a burst.

specified time, s tate,or transition sothat even eventsin the mostcomplex
signals can becaptured. Other oscilloscopes typicallyoffer less than20
trigger combinations; Pinpoint triggering offersover 1400 combinations,
all at full performance.

With Enhanced Triggering, trigger jitteris reduced to <100 fs. With this
stabilityat the triggerpoint,the trigger pointcanbe used asameasurement
reference.

B Scan Event Trigger

Users who wishto create eyediagrams from databursts synchronized or
initiated by an Aevent will findthe B EventScan trigger functionespecially
useful. B Event Scanis an A to B trigger sequence that willtrigger and
capture burst event data ofinterest defined by the B Eventsetup menu.
Captured bits can be scanned ina sequential or randomized fashion,

ivelythe trigger can togglebetweentwo successive B triggerevents.

alternat

www.tektronix.com 11

Data Sheet

IntegratedLogicChannels – Provide time-correlatedanalog and digitalvisibilityfor system
debugging.

UsingVisu

al Triggerto view DDR3 DQ and DQS signals.

Visual Trigger for Debug

The Visual Triggeroption adds an additional dimension to the Pinpoint
Triggeringsystem that providesan intuitive method of triggering based on
shapesin the oscilloscope’sgraticule. It enables theuser to d efine shapes
on the oscilloscope’sdisplay that qualify trigger events for theincoming
signals. Areas can be createdusing a varietyof shapes includingtriangles,

es, hexagons, ortrapezoids to fit the a rea to the particulartrigger

rectangl
behavior desired. Onceshapes are created on the oscilloscope’sdisplay,
they can be positioned and/or re-sizeddynamicallywhile the oscilloscope
is in Run mode tocreate idealtrigger cond itions. Visual Triggercan be
combined with the Tektronix PinpointTriggersystemand act asa Boolean
logic qualifier for “A” an d “B” events.

VisualTriggercan speed upcomplex d ebuggingsituations forhigh-speed
serialsignaling with 8 shapesto define a seriesofones and zeros. For DDR

ngsituations, Visual Triggercanbehelpful for accuratelycapturing

debuggi
bursty read/write traffic. It also can detect patterns in the memorydata
buses using thedynamic shapingof Visual Triggerto localize thecause
of reduced setupand holdmargins.

Logic Pattern Triggering

Logicpattern triggering allowslogic qualification thatcontrols when tolook
for faults and ignore events thatdo not occurduring the desiredstate. On
the MSO70000 Series,up to 20-bitwide logic patterntriggering enhances
the Pinpoint triggercapabilities by helpingyou isolate the specificsystem

d analog eventsthat are causingsystem failure.

state an

Digital A then Analog B Triggering
(MSO70000 Series only)

Advanced triggering capabilities include DigitalA thenAnalog B to help
youto identify aspecific digital pattern orsystem state andthen wait for an
analog event such as a runt pulseto trigger theacquisition.

Integrated Logic C

hannels (MSO70000 Series only)

The MSO70000 Series extends the debug capabilities of a 4-channel
oscilloscopewith an additional 16logicchannels that can beused to provide
systemlevel context whenthe fault occurs. Thiscontext, such asanillegal
system state or error,maybe the cluethat leads tothe root cause. When
otheroscilloscopes require youtouse a logic analyzerto see the digitaldata
you need tosolve your debugging challenge, the MSO70000 Seriescan
effectivelydebug and verify manydigitaltiming issues inthe system more
quickly and easily. With 80 pstiming resolution and channel-to-ch annel
skewsof as littleas 160 ps, theintegrated logic channelsallow you toview
and measure time-correlated digital andanalog data in the samedisplay
window.

iCapture (MSO70000 Series only)

When an anomaly is seen on digitallines, iCapture delivers new insight
intothe analog behaviorof the digitalsignals. With iCapture, youcan route
any 4 of the16 logic channelsto the MSO70000 Series' analog acquisition
systemso that these signalscan be viewed infinerdetail. iCapture's unique
multiplexer circuitry provides simultaneous digital and analog views of

withouthaving to move thelogic probe or doubleprobe the circuit.

signals

12 www.tektronix.com

Digital and Mixed Signal Oscilloscopes —DPO/DSA/MSO70000Series

AdvancedS
navigates

FastFrame

When the key events you are interested in are widelyspaced in time,such
as bursts of activity on abus, the FastFramesegmented memory feature
on the D PO/DSA/MSO70000 Series enables youto capture theevents of
interestwhile conserving acquisitionmemory. Using multipletrigger events,
FastFrame captures andstores short burstsof signals andsaves them as
framesfo
andbus or logictriggeringenable you tocaptureyour fastest, burstysignals
on the analog channels atthe highest samplerate while thelogic channel
triggerrecognizes the buscycle of interest. Capturingthousands of frames
is possible, so long-term trends andchanges in thebursting signal canbe
analyzed.

earchandMark–Highlightsimportant events, skips unimportantones,and

between eventsofinteresteffortlessly.

rlater viewing and analysis. On theMSO70000 Series, FastFrame

Thelow-costsolder tips availablefortheP7500 TriMode probesallowquick connection so
movingtheprobetovarioussolderpoints is fast and easy.

Advanced Search and Mark

Isolating the key eventcausing your systemfailure can oftenbe a tedious
task. With theAdvanced Event Search and Markfeature standard on the
DPO/DSA

/MSO70000 Series, examiningdata and highlighting important
events, skipping the unimportant ones, andenhancing the comprehension
of event relationshipsis made easy. With ASM, you'llbe able to navigate
between the events ofinterest effortlessly anduncover that rareevent you
have been trying to find.

Embedded Serial Bus (I2C, SPI, RS-232/422/485/UART,
USB) De

coding and Triggering

The DPO/DSA/MSO70000 Seriesinstruments provide integratedsupport

oad range ofserial buses – I

for a br

2

C, SPI, RS-232/422/485/UART, and
USB.This support for upto 16 separate serialbusesenables you tomonitor
or debug subsystemsand components, such asfrequency synthesizers,
D/A converters, and FlashMemory that a re controlledor monitored through
serial control buses. While monitoring or debugging these serial buses
alone is relatively easy,decodingevents on theserial bus canalso enable

mplex system-level debugging. W hen you experience an issue

more co
witha higher-speed serialinterface, the clue towhat is going wrongmay be

Soldertipaccessoriesdesigned for the P6780 differentiallogic probes p
signalsontightlyspacedvias and fine-pitched components.

rovideaccessto

found by usingthe serial bus decode featureto observe the data onyour

2

I

C, SPI, RS-232/422/485/UART, orUSB interface.

Probing – Analog And Digital

Often the biggest challengein debugging asystem is gettingaccess to the
requiredsignals. Tektronixoffersawidearray of probing solutions,including
the P7500 TriMode probing system with bandwidths that are perfectly
matched to the DPO/DSA/MSO70000 Series. The P7500 TriModeprobes
allow you toswitch among differential,single ended, and common-mode
measurements without movingthe probe from its connectionpoints. The
P7500 Series offersprobes with performancefrom 4 GHzto 20 GHzand
offersseveral low-cost soldertips with quick connectionfeatures that allow
moving the probeto various solderpoints fast andeasy.

On the MSO70000 Series, the P6780 differential, P6750 high-density

®

D-Max

,and P6717A general-purposelogic probes provideconnectivity to

eedand high-speed digitalsignals with low loading,small size, anda

low-sp
range of accessoriesfor soldering orbrowsing.

www.tektronix.com 13

Data Sheet

Production Testing

In addition to assisting engineers with design tasks, the
DPO/DSA/MSO70000 Series can provide testengineers withthe ability
to test analog and digital signals with a wide range of clock speeds
and data rates.
DPO/DSA/MSO70000 Series into anEIA standard 19inch (487 mm)rack.
AnIEEE 488.2 standardGPIB interface isstandard on all models.

LXI Class C

Usingthe LXI WebInterface,you can connecttothe DPO/DSA/MSO70000
Series through a standard web browser by simply entering the
oscilloscope’s IP address in the address bar of the browser. The web
interface enables viewing ofinstrument status andconfiguration, as wellas
statusand modification ofnetwork settings. All webinteraction conforms to
the LXI Class

OpenChoice

The OpenChoice Software allows you to customize your test and
measurement
networking features of the OpenChoice software add more flexibility to
Tektronix DPO/DSA/MSO70000 Series oscilloscopes: Using the fast
embedded bus, waveformdata c an be moved directlyfrom acquisition to
analysisapplications on theWindows desktop at much faster speedsthan
conventional GPIB transfers.

Implementation by Tektronix of industry-standard protocols, s uch as
TekVISA™ interface and ActiveX controls, are included for using and
enhancing W
instrument drivers are included to enable easy communication with the
oscilloscope using GPIB,RS-232, andLAN connections from programs
running on theinstrument or anexternal PC.

The Application Development Kit (ADK) extends the OpenChoice
framework to support custom end-user and third-party application
development. ADK documentation describes howto implement the Data
Store Public Interfaceto speed internaltransfer of waveformdata through
user-crea
time on theoscilloscope screen. The DataStore Public Interface is >2X
faster than traditional GPIB-based data transfer techniques. The Data
Store Public Int erface is accessible through MathWorks MATLAB or .NET
languages such asC# or VisualBasic. Other fe atures of the ADKinclude
a DPOJET plug-in that enables users to add custom measurements to
this marke
comprehensive documentation and coding examples to aid the user in
developingtheir own uniqueanalysis tool kit toquickly capture andanalyze
their signals.

Rackmount options are available for mounting the

Cspecification.

®

Analysis Tools

system with familiar analysistools. The analysis and

indowsapplications for dataanalysis and documentation. IVI

ted data processing algorithms and display the results in real

t-leading timing and jitteranalysis tool. The ADK provides

Research

With industry-leading acquisition speed and signal-to-noise ratio
performance, the DPO/DSA/MSO70000 Series can provide researchers
with tools that allowthem to capture,display,and analyze high-speedand
transient sign

Full Control of Acquisition and Display Parameters

You have full control ofthe instrument's acquisition modes. Choose the
mode you need to doyour jobthe fastest: Automatic, Constant Sample
Rate, or Manualsettings. When youare doing signalexploration and want
a lively signa
display update rate. If you want the highest real-time sample rate that
will give youthe most measurementaccuracy,then the ConstantSample
Rate mode isfor you. Itwill maintain the highest samplerate and provide
the best real-timeresolution. Finally theManual mode ensuresdirect and
independent control ofthe sample rateand record length for applications
requiring sp

Tek Link

When you need to capture a large number of signals simultaneously,
TekLink allows you to synchronize multiple DPO/DSA/MSO70000Series
oscilloscopesand acquire morethanfour analog channels. TekLinkenables
synchroniz

Document Tools

The OpenChoice architecture provides a com prehensive software
infrastructure for faster,moreversatile operations. Data transfe r utilities,
suchas the Excelor Word toolbar plug-inscan be usedto simplify analysis
anddocume

als with unmatchedprecision.

l, the defaultAutomatic mode provides you withthe liveliest

ecific settings.

®

edcapture on upto4 oscilloscopes withone trigger event.

ntation on the Windowsdesktop or on anexternal PC.

14 www.tektronix.com

Digital and Mixed Signal Oscilloscopes —DPO/DSA/MSO70000Series

This view in the floating license system identifies thelicense'scurrentuser and location
allowingyoutoeasilymanage your floating license inventory.

Unmatched Usability

The DPO/DSA/MSO70000 Series instruments excel in usability with a
suiteof productivity features,such as atouch screen, flatmenu structures,
intuitive graphical icons, knob-per-channel vertical controls, rightclicks,
mousewheel operation , andfamiliar Windows-based controls.

Remote Desktop

When your oscilloscope is connected toa network, use the Windows
Remote Desktop utilityto access youroscilloscope from acrossthe lab or
across the globe.

MyScope®– Create Your Own Control Windows

Easily create your own personalized"toolbox" of oscilloscope features
in a matter of minutes usinga simple, visual, drag-and-drop process.
Oncecreated, these custom control windows are easily accessed through
a dedicated MyScope button and menu selection on the oscilloscope

button/menu bar, justlike anyother controlwindow. You can make an
unlimited number ofcustom control windows, enabling each person who
uses the oscill
control window. MyScope control windows will benefit all oscilloscope
users,eliminating the ramp-up timethat many face whenreturningto the lab
afternot using an oscilloscopefor a while, andenables the power usertobe
farmore efficient. Everything yo u needisfound in onecontrolwindow rather
than navigating throug h multiplemenus to repeatsimilar tasks.

oscope in ashared environmentto have their own unique

Option Asset Management: Floating or Fixed

Many Tektronixapplication solutions and hardware optionsare enabled
with an encrypted license keythat is entered through the oscilloscope's
Utilitiesmenu. Younowhave two options. The first option isa fixed license
applied to aspecific scope serial number andis permanently enabled. A
fixed license

The second option isa floating license. Floating licenses provide the
capability t
another. This capability helps users with distributedteams andseveral
Tektronix DPO/DSA/MSO70000, or DPO7000, andMSO/DPO5000 Series
oscilloscopesto better managetheirassets and deployapplications or othe r
options such as extendedmemory to the oscilloscopewhereit is needed.

Managing and deploying floating licensesuses aneasy online licensing
management s ystem. All floating license management functions are
maintained on Tektronixsecure servers and noinfrastructure or your
company IT d
your myTek account to access, track, and deploy your oscilloscope
floating-license enabled options.

cannot be moved fromone oscilloscope toanother.

o move alicense-key enabled option from oneoscilloscope to

epartment involvement is necessary. Simply utilize

Performance You Can Count On

Dependon Tektronixtoprovide you with performanceyou can count on. All
Tektronix productsarebacked with industry-leadingserviceand support.

www.tektronix.com 15

Data Sheet

Characteristics

Vertical System

Characteristic DPO70404C

Bandwidth

DSA70404C
MSO70404C

4GHz 6GHz 8GHz 12.5GHz 16GHz 20GHz 25GHz 33GHz

DPO70604C
DSA70604C
MSO70604C

DPO70804C
DSA70804C
MSO70804C

DPO71254C
DSA71254C
MSO71254C

DPO71604C

DSA71604C

MSO71604C

(User-selectable
DSPenhance)

Hardware Analog

4 GHz 6 GHz 8 GHz 12.5 GHz 16 GHz (typical) 16 GHz (typical) 25 GHz 33 GHz

Bandwidth(–3dB)
InputChannels
Logic Channels

44444444

16 16 16 16 16 16
(MSO70000
Seriesonly)

Rise Time 10% to

98 ps 65 ps 49 ps 32 ps 24.5 ps 18 ps 16 ps 12.5 ps

90% (Typical)
Rise Time 20% to

68 ps 45 ps 34 ps 22 ps 17 ps 14 ps 12 ps 9 ps

80% (Typical)
Vertical Noise

(% of full scale)

1

(Typical)*
BandwidthLimits

0.28% 0.32% 0.35% 0.36% 0.36% 0.56% 0.58% 0.58%

Depending on instrument model: 32 GHz to 1 GHz in 1 GHz steps, or 500 MHz

Hardware-only bandwidth settings at 33, 25, 20, and 16 GHz

Channel-to-Channel
Isolation (Any two
channels at equal

≥120:1 (for input frequency 0 to 10 GHz) ≥80:1 (for input frequency >10 GHz to 12 GHz)

≥50:1 (for input frequency >12 GHz to 15 GHz) ≥25:1 (for input frequency >15 GHz)

≥20:1 (for input frequency >20 GHz to 33 GHz)

vertical scale
settings)

DCGainAccuracy ±2% (of reading)
Delay between

≤10 ps for any two channels with equal V/div and coupling settings
AnyTwoChannels
(Typical)

EffectiveNumber

5.5 bits*

2

ofBits(Typical)
Signal to Noise

34 dB

Ratio(Typical)
InputCoupling DC (50 Ω), GND
InputImpedance

50 Ω ±3%, 1 MΩ with TCA-1MEG adapter

InputSensitivity

18 GHz and

10 mV/div to 500 mV/div (100 mV to 5 V full scale)

below
20 GHz and

20 to 500 mV/div (200 mV to 5 V full scale)

19 GHz
33 GHz and

below

MaxInputVoltage,

3

50 Ω*
Offset Accuracy

<5.0 V

for ≥100 mV/div; 1.0 V

RMS

for <100 mV/div

RMS

±(0.35% (offset value-position) + 1.5 mV + 1% of full scale)

10 mV/div –

99.5mV/div
100 mV/div –

±(0.35% (offset value-position) + 7.5 mV + 1% of full scale)

500 mV/div.

set Range

Off

V/div: ±450 mV

10 m

V/div: ±400 mV

20 m

V/div: ±250 mV

50 m

mV/div: ±2.0 V

100

mV/div: ±1.5 V

200

0mV/div: ±0.0V

50

Termination
VoltageRange

Passband

±0.5 dB to 50% of nominal bandwidth
Flatness (20, 50,
100, 250 mV/div)
(Typical)

DPO72004C

DSA72004C

MSO72004C

DPO72504D
DSA72504D

DPO73304D
DSA73304D

6.25 mV/div to 120 mV/div (62.5 mV
to 1.2 V full scale)

1.2 V

RMS

+3.4Vto–3.4V

+3.4Vto–3.4V

16 www.tektronix.com

Digital and Mixed Signal Oscilloscopes —DPO/DSA/MSO70000Series

Characteristic DPO70404C

DSA70404C
MSO70404C

DPO70604C
DSA70604C
MSO70604C

DPO70804C
DSA70804C
MSO70804C

DPO71254C
DSA71254C
MSO71254C

DPO71604C

DSA71604C

MSO71604C

DPO72004C

DSA72004C

MSO72004C

DPO72504D
DSA72504D

DPO73304D
DSA73304D

PositionRange ±5 div
VerticalResolution

*150 mV/div,bandwidth filter on, max samplerate.

2

*

3

*

andwidth filter on, maxbandwidth upto 13GHz, max sample rate.

50 mV/div,b
Also determinedby TekConnectaccessory.

8 bit (11 bit with averaging)

Logic Channels (MSO70000 Series only)

Characteristic MSO70404C MSO70604C MSO70804C MSO71254C MSO71604C MSO72004C

InputChannels
TriggerClock/Qualifier

Input
Analog Bandwidth

With P6780 logic
probe

With P6750 or
P6717Alogicprobe

edance

InputImp

80 logic

With P67

20 kΩ to ground per side or 40 kΩ differential mode ± 2.0%, 0.5 pF

probe
With P6750 or

P6717Alogicprobe
VerticalResolution 1 bit
ThresholdLevels
Threshold Accuracy

One per channel, independently set

±75 mV + 3% of threshold setting
ThresholdResolution 5 mV
LogicThresholdRange

With P6780 logic
probe

With P6750 or
P6717Alogicprobe

Minimum Voltage
Swing

MaximumInputVoltage ±15 V nondestruct

16

1

2.5 GHz
1GHz

20 kΩ ±1.0%,3pF

–2 to +4.5V

–1.5 to +4.0V

300 mV

p-p

www.tektronix.com 17

Data Sheet

Horizontal Time Base System

Characteristic DPO70404C

DSA70404C
MSO70404C

Time Base Range
Time Resolution

(inET/ITmode)
Channel-to

-Channel

Deskew
Delta Time

1.48 ps 1.33 ps 1.24 ps 1.23 ps 1.15 ps 1.43 ps
Measurement
Accuracy RMS
over <100 ns
Duration; Single
Shot; with Signal
Rise Time = 1.2 ×
ScopeRiseTime*

Jitter No

l) (With

(Typica
BW bandw
enhance

ise Floor

idth

enabled)

4

340 fs 300 fs 300 fs 270 fs 270 fs 290 fs <250 fs <250 fs

Time Base
Accuracy

Time Base Delay
TimeRange

Trigger Jitter
(RMS)

*4100 mV/div,bandwidth filteron, max sample rate.

Acquisition System

DPO70604C
DSA70604C
MSO70604C

DPO70804C
DSA70804C
MSO70804C

DPO71254C
DSA71254C
MSO71254C

DPO71604C

DSA71604C

MSO71604C

DPO72004C

DSA72004C

MSO72004C

20 ps/div to 1000 s/div 10 ps/div to 1000 s/div

200 fs 100 fs

Range ±75 ns

±1.5 ppm initial accuracy, aging <1 ppm per year

–5.0 ks to 1.0 ks

(typical) with enhanced triggering off

1ps

RMS

<100 fs

with enhanced triggering on

RMS

DPO72504D
DSA72504D

330 fs 347 fs

DPO73304D
DSA73304D

Characteristic DPO70404C

DSA70404C
MSO70404C

Sample Rates

Real-timeMode1,

DPO70604C
DSA70604C
MSO70604C

DPO70804C
DSA70804C
MSO70804C

DPO71254C
DSA71254C
MSO71254C

DPO71604C

DSA71604C

MSO71604C

DPO72004C

DSA72004C

MSO72004C

00 GS/s*

1

2Channel(Max)
Real-timeMode1,

25 GS/s 50 GS/s
2, 3, or 4 Channel
(Max)

ET/IT Mode (Max) 5 TS/s 10 TS/s

Maximum Record Length per Channel

With Standard
Configuration

With Record

10M on all four channels (DPO70000 and MSO70000 Series)

31.25M on all four channels (DSA70000 Series only)

31.25M on all four channels (DPO70000 and MSO70000 Series)

LengthOption2XL
With Record

62.5M on all four channels

LengthOption5XL
With Record

125M on all four channels
Length Option
10XL

With Record

N/A 250M on all four channels
Length Option
20XL

5

DPO72504D
DSA72504D

DPO73304D
DSA73304D

18 www.tektronix.com

Digital and Mixed Signal Oscilloscopes —DPO/DSA/MSO70000Series

Characteristic DPO70404C

Maximum Duration at Highest Real-time Resolution

Timing Resol

0.4msDPO70000

DSA70404C
MSO70404C

ution

0.4 ms DPO70000 and MSO70000 Series

and MSO70000

DPO70604C
DSA70604C
MSO70604C

DPO70804C
DSA70804C
MSO70804C

DPO71254C
DSA71254C
MSO71254C

DPO71604C

DSA71604C

MSO71604C

40 ps (25 GS/s) 10 ps (100 GS/s)

0.1 ms DPO70000 and MSO70000 Series

1.25 ms for DSA70000 Series

0.31 ms for DSA70000 Series

DPO72004C

DSA72004C

MSO72004C

DPO72504D
DSA72504D

DPO73304D
DSA73304D

Series
Max Duration with

1.25 ms (DPO70000 and MSO70000Series) 0.31 ms (DPO70000 and MSO70000 Series)

Option2XL
Max Duration with

2.5 ms 0.63 ms

Option5XL
Max Duration with

5.0 ms 1.3 ms

Option10XL
Max Duration with

N/A

2.5 ms

Option20XL

*5Maximumsample rate is50 GS/s ondigital channelsrouted to ananalog channelthrough the iCaptureanalog mux.

Logic Channels (MSO70000 Series only)

Characteristic MSO70404C MSO70604C MSO 70804C MSO71254C MSO71604C MSO72004C

SampleRate–All
Channels (Max)

TimingResolution 80 ps
Displayed

Channel-to-Channel
TimingUncertainty

mum Record

Maxi

thperChannel

Leng

125M on all channels (Option 10XL) 250M on all channels (Option 20XL)

Minimum Detectable
Pulse Width

Maximum Number of
Buses

Number of Channels

Up to 24 (16 logic, 4 analog, 4 math)

per Bus

12.5 GS/s

<160 ps

<400 ps

16

Acquisition Modes

Mode Description

Averaging
Envelope
FastAcq
MaximumFastAcqWaveformCapture Rate >300,000 wfms/s on all4 channels simultaneously
FastFrame™

Hi-Res Real-timeboxcar averaging reduces random noise andincreases resolution
Peak Detect

Roll Mode
Sample

Waveform Database Accumulates waveform data providingathree-dimensional array of amplitude,time, and counts

From2to10,000waveformscanbeincludedinanaveragewaveform

9

From 1 to 2×10

waveforms included inmin-max envelope

FastAcq optimizes the instrumentfor analysis of dynamic signalsand capture of infrequent events

Acquisitionmemory divided into segments; maximum trigger rate >310,000 waveforms per second. Time of arrival
recordedwitheach event. Frame finder tool helps to visually identify transients

Capturesand displays narrow glitches at all real-time sampling rates. Glitchwidths: 1ns at ≤125 MS/s; 1/sample
rate at ≥250 MS/s

Scrolls sequential waveform points across the display inaright-to-left rolling motion. Works atsample rates up to
10 MS/s with a maximum record length of 40 MS

Acquires and displays sampled values

www.tektronix.com 19

Data Sheet

Pinpoint®Trigg er Syst em

Sensitivity DPO and MSO Models DSA Models

Internal DC Coupled 4% of full scale from DC to 5 0 MHz

External (Auxiliary Input) 50 Ω 250 mV from DC to 50 MHz, increasing to 350 mV at 1.0 GHz

Trigger Characteristics

AEventand Delayed B Event TriggerTypes

Edge, Glitch, Runt, Width, Transition Time, Timeout,Pattern, State, Setup/Hold, Window – all except

Edge, Pattern, and State can be Logic State qualified by up to two channels
Main TriggerModes
TriggerSequences Main,DelayedbyTime,Delayed by Events, Reset by Time,ResetbyState,ResetbyTransition. Allsequences can

includea separate horizontal delay after the trigger event topositiontheacquisition window in time

TriggerCoupling DC, AC (attenuates <100 Hz)

TriggerHoldoffRange
TriggerLevelRangeInternal
Clock Recovery System Requires Option ST6G or Option MTH Standard
ClockRecoveryPhaseLockedLoopBandwidth Fixed at FBaud/1600
Clock Recovery Jitter (RMS) <0.25% bit period + 2 ps

<0.25% bit period + 1.5 ps

MinimumSignalAmplitudeneededfor Clock Recovery 1 div
Tracking/AcquisitionRange ±2% of requested baud

ClockRecoveryFrequencyRange 1.5 MBaud to 3.125 GBaud
Serial Pattern Trigger

Requires Option ST6G Standard

Up to 64 bit serial word recognizer, bits specified in binary (high, low, don't care) or hex format.

Trigger on NRZ-encoded data up to 1.25 GBaud

Trigger on 8b/10b-encoded data from 1.25 to 6.25 GBaud (40 bits)

8b10b Max Baud Rate

Requires Option ST6G Standard

PatternLength 1-4 valid, 10-bit characters
Alignment Character K28.5 (either disparity)

Requires Option MTH StandardCommunications-relatedTriggers

Support for AMI, HDB3, BnZS, CMI, MLT3,andNRZ encoded communications signals. Select amongisolated

positive or negative one, zero pulse form, or eye patterns as applicable to the standard

Logic Pattern Trigger (MSO70000 Series)

Threshold Range

P6780 –2 to +4.5 V

P6717A/P6750
Threshold Accuracy
Bus Trigger Maximum ToggleRate

I2C, SPI, RS-232/422/485/UART 10 Mb/s
USB Low-speed, full-speed
Enhanced Triggering

User-selectable; enhanced triggering corrects the difference in timing between the trigger

path and the acquired data path (supports all Pinpoint trigger types on both A- and B-Events

except pattern trigger); Not available in FastAcq mode

Line

Visual Trigger

Trigger on power line signal. Level fixed at 0 V

Max Number of Areas
Area Shapes
Compatibility Visual Trigger qualification is compatible with all trigger types andall trigger sequences

10% of full scale at 4 GHz
20% of full scale at 8 GHz

50% of full scale at 11 GHz

Auto, Normal, and Single

HF Rej (attenuates >20 kHz)

LF Rej (attenuates <200 kHz)

Noise Reject (reduces sensitivity)

250 ns min to 12 s max

±120% of full scale from center of screen

for PRBS data patterns

RMS

for repeating "0011”data pattern

RMS

up to 1.25 Gbaud

p-p

1.5 div

above 1.25 Gbaud

p-p

6.25 GBaud

–1.5 to +4 V

±100 mV + 3% of threshold setting

Requires Option VET

8

Rectangle, Triangle, Trapezoid, Hexagon

20 www.tektronix.com

Digital and Mixed Signal Oscilloscopes —DPO/DSA/MSO70000Series

Trigger Types

Trigger Analog

Comm
Bus X X

I2C
SPI
RS-232/422/485/UART
USB

Edge X X
B Event Scan

Glitch
Pattern X X

Runt X
SerialPattern

Setup/Hold
State
Timeout X X

Transition X
TriggerD elay by Events X X 1 to 2 billion events

TriggerDelay by Time X X 3.2 ns to 3 million seconds
Visual Trigger X
Width X X
Window X

Channels

X

XX
XX
XX
XX

X

XX

X

X
XX

MSO Logic

Channels

SupportforAMI,HDB3,BnZS,CMI,MLT3, and NRZ encoded signals. Standard featureontheDSA70000

Series, provided as partof Option MTH onthe DPO70000 and MSO70000Series

Triggeron a parallel or serial bus when the specific bus value is found

TriggeronStart,RepeatedStart, Stop, Missing ACK, Address (7 or 10 bit), Data, or Address and Data

Trigger on Start Bit, End of Packet, Data, and Parity Error

Low-speed or Full-speed: Trigger on Sync, Reset, Suspend, Resume, End of Packet, Token

(Address) Packet, Data Packet, Handshake Packet, Special Packet, Error

Positive or negative slope on any channel or front-panel auxiliary input. Coupling includes

DC, AC, noise reject, HF reject, and LF reject

B Event Scan is an AtoB trigger sequence that will trigger and captureburstevent data of interest as

definedin the B Event Scan setup menu. Capturedbitscanbe scanned in a sequential or randomized

fashion,and alternativelythetriggercantogglebetweentwo successiveB trigger events. Eye diagrams

canbeconstructedwithburstdataacquired as a result of scanning B Event

Trigger on or reject glitches of positive, negative, or either polarity. Minimum glitch

width is 150 ps (typical) with rearm time of 300 ps

Trigger when pattern goes false or stays true for specified period of time. Pattern (AND, OR,

NAND, NOR) specified for four input channels (and 16 logic channels on the MSO70000

Series) defined as high, low, or don't care

Trigger on a pulse that crosses one threshold but fails to cross a second threshold before

crossing the first again. Event can be time- or logic-qualified

Trigger on NRZ-encoded data up to 6.25 Gbaud; above 1.25 Gbaud requires 8b/10b

encoded data. Extended with pattern lock triggering to capture repeated acquisitions

of long serial test patterns up to 6.25 Gb/s

Trigger on violations of both setup time and hold time between clock and data

present on any two input channels

Any logical pattern of channels (1, 2, 3) (and 16 logic channels on the MSO70000 Series) clocked

by edge on channel 4. Trigger on rising or falling clock edge

Triggeron an event which remains high, low,oreither,for a specified time period. Selectablefrom300ps

Trigger on pulse edge rates that are faster or slower than specified. Slope

may be positive, negative, or either

Trigger when the Visual Trigger expression is satisfied

Triggeronwidthof positive or negative pulse either withinoroutofselectable time limits (down to 150 ps)

Trigger on an event that enters or exits a window defined by two user-adjustable

thresholds. Event can be time or logic qualified

Description

Trigger on SS or data

Search and Mark Events

Searchforglitchesorrunts,aswellastransitionrate,pulsewidth,setupand hold,
timeout, window violations, or find anylogicorstate pattern on any number of
channels. Anyeventsfoundmatchingthesearchcriteriaaremarkedandplaced
in the Event table. The search can use positive/negative slopes or both on any
channels.

SearchDDR Read or Write bursts with Option DDRA.
The Event table summarizes all foundevents. All events are time stamped in

referencetotriggerposition. Users can choose to stop acquisitions when an event
is found.

Waveform Analysis

Waveform Measurements

rement

Measu

atic

Autom

rements

Measu

AmplitudeRelated Amplitude, High, Low, Maximum, Minimum,

Combination Area, Cycle Area, Phase, Burst Width
Eye-pattern Related

Histogram Related

TimeRelated Rise Time, Fall Time, Positive Width, Negative Width,

iption

Descr

53, of which 8 can bedisplayedon-screen at any one
time; measurementstatistics,user-definablereference
levels, measurementwithingates isolatingthe specific
occurrencewithinanacquisitiontomeasure

Peak-to-Peak,Mean, Cycle Mean, RMS, Cycle RMS,
Positive Overshoot, Negative Overshoot

Extinction Ratio (absolute, %, dB), Eye Height, Eye
Width,EyeTop,EyeBase,Crossing%, Jitter (p-p, RMS,
6sigma), Noise (p-p, RMS), Signal/Noise Ratio, Cycle
Distortion,Q-Factor

WaveformCount, Hits in Box, Peak Hits, Median,
Maximum,Minimum,Peak-to-Peak,Mean(μ), Standard
Deviation(sigma),μ+1sigma,μ+2sigma, μ+3sigma

Positive Duty Cycle, Negative Duty Cycle, Period,
Frequency,Delay

www.tektronix.com 21

Data Sheet

Bus Decoding

Characteristic

Parallel

I2C SCLKandSDAchannelsaredisplayedasabusperthe
SPI MOSI,MISO,SCLK,andSS channels are displayed as a
RS-232/422/485/UART Channel is displayed as a bus

USB Channels are displayed as a bus per the USB
MIPI®D-PHY
8b10bEncoded

Description

Data from selected channels is grouped asaparallel,
multichannelbus and displayed as a single bus value.
Display can be binary,hexadecimal,orsymbolic formats

Inter-IntegratedCircuitspecification
bus per the Serial Peripheral Interface specification

specification
DSI or CSI2 channels are displayedasa bus per the

MIPI standard
Control and data characters are displayed as a bus

Waveform Processing/Math

Measurement Description

AlgebraicExpressions

Arithmetic
FilteringFunctions

Frequency Domain
Functions

Mask Function
MathFunctions

Relational
VerticalUnits Magnitude: Linear, dB, dBm

Window Functions Rectangular, Hamming, Hanning, Kaiser-Bessel,

Define extensive algebraic expressions including
Waveforms,Scalars, User-adjustable Variables,and
Resultsof ParametricMeasurements
e.g. (Integral (CH1 – Mean(CH1)) × 1.414 × VAR1)

Subtract, Multiply,DivideWaveformsandScalars

Add,

-definable filters. Users specifya file containingthe

User

ficients of the filter. Several example filter files are

coef

ided

prov
Spectral Magnitude and Phase, Real andImaginary

Spectra
Generates a Waveform Database pixel mapfrom a

samplewaveform. Sample count can be defined
Average,Invert,Integrate,Differentiate,SquareRoot,

Exponential, Log 10, Log e,Abs, Ceiling, Floor, Min,
Max,Sin,Cos,Tan, ASin, ACos, ATan,Sinh,Cosh,Tanh

Booleanresultofcomparison>,<,≥,≤,==, !=

Phase: Degrees, radians, groupdelay
IRE and mV units

Blackman-Harris,Gaussian,Flattop2, TekExponential

Computer System and Peripherals

Characteristic

OperatingSystem MicrosoftWindows 7 Ultimate – 64 bit OS
CPU IntelCore2DuoProcessor,3 GHz
PCSystemMemory 8 GB
HardDisk Drive
Optional Solid State

Drive(OptionSSD)
CD/DVD Drive Front-panel CD-R/W, DVD-R drive
Mouse
Keyboard

Description

Rear-panel,removablehard disk drive, 160 GB capacity
Removable,160 GB capacity

(SSDisstandardon25and33 GHz models)

Opticalwheelmouse,USB interface
USB interface

Input/Output Ports

Front Panel

Port Description

AuxTriggerInput
DC Probe Calibration

Output
FastEdgeOutput SMAconnectorprovidesfastedgesignal. 1kHz±20%;

red Clock

Recove

Recovered Data

USB 2.0 Ports AllowsconnectionofUSBkeyboard,mouse,orstorage

eXtensions for Instrumentation (LXI)

LAN

Class LXI Class C
Version 1.3

See trigger specifications
BNC connector,±10 V DC for DC probe calibration

(signalavailableonlyduringprobecalibration)
810 mV (base to top) ±20% into ≥10 kΩ load;440mV

±20% into a 50 Ω load

nector,≤1.25 Gb/s, Output swing ≥130 mV

SMA con

Ω at1.25Gb/s. Requires Option ST6G or Option

into50

nable on DPO70000 and MSO70000 Series,

MTH to e

rdon DSA70000 Series

standa
SMA connector, ≤1.25 Gb/s, Outputswing of 1010

repeating pattern 200 mV into 50 Ω at 1.25 Gb/s.
Requires Option ST6G or Option MTH to enable
on DPO70000 and MSO70000 Series,standard on
DSA70000Series

device

p-p

Display, Computer, I/O

Display

Characteristic

Color Palettes Normal, Green, Gray,Temperature, Spectral, and
Display Format YT,XY, XYZ

Display Resolution
Display Size Diagonal: 307.3 mm(12.1 in.)
Display Type Liquid-crystal active-matrix color display
Horizontal Divisions 10
VerticalDivisions 10
WaveformStyles Vectors,Dots, Variable Persistance,InfinitePersistance

Description

User-defined

XGA 1024 horizontal× 768 verticalpixels

22 www.tektronix.com

Digital and Mixed Signal Oscilloscopes —DPO/DSA/MSO70000Series

Rear Panel

Port Description

Audio Ports

Miniaturephonejacksfor stereo microphone input and
stereo line output

AuxTriggerOutput BNC connector, 0 to 3 V; default output isA-Event

Triggerlow true

External Time Base
ReferenceIn

BNC connector;allowstimebasesystemtophaselock
to external10/100MHzreference. Optimized (by using
a software switch) for either a highly stable clockor

tracking mode
GPIB Port
KeyboardPort
LAN Port

IEEE 488.2 standard

PS/2 compatible

RJ-45connector,supports 10BASE-T,100BASE-T,and

1000BASE-T
Mouse Po

rt

PS/2 compatible
eSATA port ExternalSATA interface foreSATA storage devices
Power

DVI-IVideoPort

100 to 240 V

<870W,400Hz;CATII, <1100VAtypical

Connecttoshowthe oscilloscopedisplay,including live

, ±10%, 50/60 Hz; 115V

RMS

RMS

±10%,

waveforms on an external monitoror projector. The

primaryWindows desktop can also be displayed on an

externalmonitorusingthese ports.

Alternatively,theDVI-Iportcanbeconfigured to show

the secondaryWindowsdesktop(also called extended

desktopor dual-monitor display)

DVI connector, female. DVI to VGA 15-pin D-sub

connectoradapterprovided

ial Port

Ser

®

TekLink

Time Base Reference
Out

DB-9 COM1 ports

Two

chronizes triggers from multiple Tektronix

Syn

illoscopes together to allow simultaneousacquisition

osc

ore than four channels

of m

BNC connector; provides TTL-compatibleoutput of

internal10MHz referenceoscillator
USB 2.0 Ports Fiveon25and33GHzmodels,fouronallothers.. Allow

connectionofUSBkeyboard,mouse, or storage devices

Mechanical

Cooling – Requ ired
Clearance

mm

Top 0 0
Bottom 0 0
Left Side
RightSide

76 3

76 3
Front 0 0
Rear 0 0

Environmental

Characteristic

Description

Temperature

Operating 5°C to +45 °C
Nonoperating

–20°Cto+60°C

Humidity

Operating 8%to 80% relative humidity (RH) at up to 32 °C

Above+32°Cup to +45 °C; as limited by a 29.4 °C wet
bulb temperature

Nonoperating

5% to 95% relative humidity (RH)
Above+32°Cup to +60 °C; as limited by a 29.4 °C wet
bulb temperature

Altitude

Operating 3,000 m (9,843 ft.)
Nonoperating

12,000 m (39,370 ft.)

Regulatory

Electromagnetic

2004/108/EC;EN61326-2-1:2006

Compatibility
Certifications UL 61010-1, CSA 61010-1-04, LVD 2006/95/EC,

EN61010-1,IEC 61010-1

in.

Physical Characteristics

Dimensions

Benchtop Configuration

Dimension

Height 298 11.74
Width 451 17.75
Depth 489.97 19.29

Weight kg lb.

Net 24 53
Shipping

Rackmount Configuration

Dimension mm in.

Height 311 12.25
Width 480.1 18.9
Depth (from rack mounting

ear to back of instrument)

Weight kg lb.

Net 22 59
Kit 2.7 6

mm

in.

34 67

546.1 21.5

www.tektronix.com 23

Data Sheet

Ordering Information

Models

Model Description

MSO70404C 4 GHz Mixed SignalOscilloscope
MSO70604C 6 GHz Mixed SignalOscilloscope
MSO70804C 8 GHz Mixed SignalOscilloscope
MSO71254C 12.5 GHz Mixed Signal Oscilloscope
MSO71604C 16 GHz Mixed Signal Oscillosc ope
MSO72004C 20 GHz Mixed Signal Oscillosc ope
DPO70404C 4GHz DigitalPhosphor Oscilloscope
DPO70604C 6GHz DigitalPhosphor Oscilloscope
DPO70804C 8GHz DigitalPhosphor Oscilloscope
DPO71254C 12.5GHzDigital Phosphor Oscilloscope
DPO71604C 16GHz DigitalPhosphor Oscilloscope
DPO72004C 20GHz DigitalPhosphor Oscilloscope
DPO72504D 25GHz DigitalPhosphor Oscilloscope
DPO73304D 33GHz DigitalPhosphor Oscilloscope
DSA70404C 4 GHz Digital Serial Analyzer
DSA70604C 6 GHz Digital Serial Analyzer
DSA70804C 8 GHz Digital Serial Analyzer
DSA71254C 12.5GHzDigitalSerialAnalyzer
DSA71604C 16GHz Digital Serial Analyzer
DSA72004C 20GHz Digital Serial Analyzer
DSA72504D 25GHz Digital Serial Analyzer
DSA73304D 33GHz Digital Serial Analyzer

All Models Include: Accessory pouch, front cover, mouse, keyboard, quick start
user manual (071-173x-xx),(4)TekConnect
and (1) TekConnect-to-BNCadapter(TCA-BNC), DVI to VGA adapter,static
protectionwriststrap,DPO/DSA/MSO70000 Series product softwareCD/DVD-ROM,
performance verification procedure PDF file, GPIB programmer's reference
(on product software CD/DVD-ROM), calibration certificatedocumenting NIST
traceability,Z540-1complianceandISO9001,powercord, one-year warranty.

Note: Please specify quick-start user manual languageand power plug when
ordering.

®

to 2.92 mm adapters (TCA-292MM)

24 www.tektronix.com

Digital and Mixed Signal Oscilloscopes —DPO/DSA/MSO70000Series

Options

Instrument Options

Option D PO700 00 DSA70000 MSO70000

Record Length Opt ion s

Opt. 2XL
Opt. 5XL
Opt. 10XL
Opt. 20XL*

Storage Options

Opt. SSD*

MSO70000 Digital Signal Ana lyze r Options

10

18

X

Standard
XXX
XXX
XXX

XXX

Opt. DSAH X, for MSO70404C,

Opt. DSAU X, for MSO71254C,

Trigger and Search Options

Opt. LT
Opt. MTH

Opt. ST6G

Advanced Analysis Options

Opt. D-PHY*
Opt. DDRA*

11

11

Opt. DJA
Opt. DSPT*

13, 14

Opt. DVI
Opt. ERRDT*

Opt. ET3*

15

6

Opt. HT3
Opt. HT3DS
Opt. M-PHY*
Opt. PCE3*
Opt. PWR*
Opt. QPI*
Opt. SFP-TX*

11

11

8

11

19

Opt. SLA
Opt. SLE
Opt. SR-COMP

Opt. SR-CUST
Opt. SR-DPHY
Opt. SR-EMBD
Opt. SR-USB
Opt. SVE
Opt. SVM*
Opt. SVO*
Opt. SVP*
Opt. SVT*
Opt. USB*
Opt. USB3*

12
12
12

12

7

11, 13

Opt. VET

XXX
X

X

Standard
Standard

XXX
X X X DDR Memory Bus Analysis
X

Standard
XXX
XXX
XXX

XXX
XXX
XXX
XXX
XXX
XXX
XXX
XXX
XXX
XXX
XXX

XXX
XXX
XXX
XXX
XXX
XXX
XXX
XXX
XXX
XXX
XXX
X X X Visual Trigger

X

MSO70604C, or

MSO70804C

MSO71604C, or

MSO72004C

X
X

X

Description

31.25 MS/Ch

62.5 MS/Ch
125 MS/Ch
250 MS/Ch

Additional Removable Disk – Solid State Drive

MSO Digital Serial Analysis Bundle, includes Opt.

2XL, DJA, MTH, and ST6G

MSO Digital Serial Analysis Bundle, includes Opt.

2XL, DJA, MTH, and ST6G

Waveform Limit Testing

Mask testing for Serial Standards. Includes hardware

clock recovery for up to 3.125 Gb/s

Protocol Triggering and Decoding for 8b/10b-encoded

Serial Signals up to 6.25 Gb/s. Includes hardware clock

recovery and pattern lock triggering

®

D-PHYEssentials–Characterizationand Analysis Solution

MIPI

DPOJET Jitter and Eye DiagramAnalysis

DisplayPort Compliance Test Solution

DVI Compliance Test Solution

Frame and Bit Error Rate Detector for High-speed Serial

Standards(Availablethrough the programmable interface only)

Ethernet Compliance Test Software

HDMI Compliance Test Software

HDMI Direct Synthesis for HDMI 1.4

®

M-PHYEssentials–Characterizationand AnalysisSolution

MIPI

PCI Express Gen3 Essentials

Power Measurement and Analysis Software

®

Quick Path Interconnect TestAutomation Software

Intel

SFP+ Compliance and Debug Solution

Serial Data Link Analysis Advanced (with Equalization)

Serial Data Link Analysis Essentials (no E qualization)

Computer Serial Triggering and Analysis

(RS-232/422/485/UART)
Custom Serial Analysis Kit for Developers
MIPI®D-PHY (DSI / CSI2) Serial Analysis

Embedded Serial Triggeringand Analysis (I2C, SPI)

USB Serial Triggering and Analysis

SignalVu®Essentials– VectorSignalAnalysis Software

General Purpose Modulation Analysis

Flexible OFDM Analysis

AdvancedSignalAnalysis(includingpulsemeasurements)

Frequency and Phase Settling Time Measurements

USB 2.0 Compliance Test Software

USB 3.0 Compliance and Analysis Software

www.tektronix.com 25

Data Sheet

Option D PO700 00 DSA70000 MSO70000

Floating Optio

n Licenses

Description

FloatingLicenses offeran alternative method to manage your Tektronixasset. Floatinglicensesallow license-key enabled options to be easily moved amongallyour
DPO/DSA/MSO70000, DPO7000,and MSO/DPO5000 Series oscilloscopes. Floatinglicensesareavailableforthelicense-keyenabled options listed below.

Check www.tek.com/products/oscilloscopes/floatinglicenses for additional information about floating license options.
DPOFL-ASM
DPOFL-D-PHY*
DPOFL-DDRA*
DPOFL-DJA
DPOFL-DSA
DPOFL-DSPT*
DPOFL-DVI
DPOFL-ERRDT*

11

11

13, 14

15

X
XXX
X X X DDR Memory Bus Analysis
X
X
XXX
XXX
XXX

17

X*

17

X*

17

X*

X

®

MIPI

X
X

Advanced Event Search and Mark

D-PHYEssentials–Characterizationand Analysis Solution

Jitter and Eye Analysis Tools– Advanced (DPOJET)

Digital Serial Analysis Bundle

DisplayPort TransmitterCompliance TestSoftware

DVI Compliance Testing

Frame and Bit Error Rate Detector for High-speed

Serial Standards

6

DPOFL-ET
DPOFL-H
DPOFL-H
DPOFL-L
DPOFL-M
DPOFL­DPOFL­DPOFL­DPOFL­DPOFL­DPOFL­DPOFL
DPOFL
DPOFL

3*
T3
T3DS

T

PHY

MTH

11

PCE3*
PTD
PTM-H

8

PWR*

11

QPI*

-SLA

-SLE

-SR-COMP

DPOFL-SR-DPHY
DPOFL-SR-EMBD
DPOFL-SR-USB
DPOFL-ST6G
DPOFL-STU

XXX
XXX
XXX
XXX
XXX
X

17

X*

X

PHYEssentials–Characterizationand AnalysisSolution

MIPI®M-

Mask Te
XXX
X
XXX

17

X*

X

Serial

HDMI Dir

sting, includes Hardware Clock Recovery

PCI Exp

Protoc

ProtocolTriggerand Decode up to 6.25Gb/s

Compliance Testing

Ethernet

HDMI Com

pliance Testing

ect Synthesis for HDMI 1.4

m Limit Testing

Wavefor

ress Gen3 Essentials

ol Trigger and Decode for 8b/10b

X X X Power Measurement and Analysis
XXX
XXX
XXX
XXX

XXX
XXX
XXX
X

17

X*

X

X

®

Quick Path Interconnect TestAutomation Software

Intel

lData Link Analysis – Advanced (includes Equalization)

Seria

l Data Link Analysis –Essentials (no Equalization)

Seria

ter Serial Triggering and Analysis

Compu

32/422/485/UART)

(RS-2

MIPI®D-PHY (DSI / CSI2) Serial Analysis

Embedded Serial Triggeringand Analysis (I2C, SPI)

USB Serial Triggering and Analysis

8b/10bSerialProtocolTriggerandDecodeupto6.25Gb/s

Upgrade from 3.125 Gb/s to 6.25 Gb/s 8b/10b Serial

Protocol Trigger and Decode

OFL-SVE

DP

OFL-SVM*

DP

OFL-SVO*

DP

POFL-SVP*

D

POFL-SVT*

D

POFL-USB*

D

POFL-USB3*

D

POFL-VET

D

POFL-XL02

D

12
12

12

12

7

11, 13

DPOFL-XL05
DPOFL-XL010
DPOFL-XL020*

TekExpress®Application Framework

10

XXX
XXX
XXX
XXX
XXX
XXX
XXX

gnalVuEssentials – Vector Signal Analysis Software

Si

gnalVuGeneral Purpose Modulation Analysis*

Si

exible OFDM Analysis*

Fl

ignalVuPulse– Advanced Signal Analysis Software*

S

ettling Time Measurements – Frequency and Phase

S

SB 2.0 Compliance Testing

U

SB 3.0 Essentials

U
X X X Visual Trigger
X
XXX
XXX
XXX

17

*

X

X

xtended record length – 31.25M Samples/Ch

E

Extended record length – 62.5M Samples/Ch

Extended record length – 125M Samples/Ch
Extended record length – 250M Samples/Ch

12

TEKEXP X X X TekExpress Automation Framework
Opt. D-PHYTX
Opt. DIIVA
Opt. DP-SINK
Opt. HEAC
Opt. SAS-RSG
Opt. SAS-RXTX
Opt. SAS-TSG

XXX
XXX
XXX

DisplayPort Sink Compliance Automation Software
XXX
XXX
XXX
XXX

D-PHY Automated Solution

DiiVA Automation Solution

HEAC Automated Solution

Stand-alone SAS Receiver Measurements

Stand-alone SAS Channel Measurements

Stand-alone SAS Transmitter Measurements

12

12

26 www.tektronix.com

Digital and Mixed Signal Oscilloscopes —DPO/DSA/MSO70000Series

Option D PO700 00 DSA70000 MSO70000

Opt. SAS-DHB
Opt. SATA-TSG
Opt. SATA-RSG
Opt. SATA-RXTX
Opt. SATA-DHB

Opt. SATA-SI
Opt. USB-RMT
Opt. USB-TX*

11, 13

Opt. XGbT

*6Requires Ethernet TestFixture.

7

Requires TDSUSBF (USB Test Fixture).

*

8

*

At least Opt. 2XL and a TCA-1MEGTekConnect 1 MΩ buffer amplifier are recommendedfor use.

9

RequiresOpt. RTE.

*

10

For models ofbandwidth ≥12.5 GHzonly.

*

11

*

RequiresOpt. DJA.

12

Requires Opt. SVE.

*

13

For models ofbandwidth ≥8GHzonly.

*

14

*

RequiresOpt. DJA and 5XL.

15

Requires Opt. ST6G.

*

16

Requires Opt. MTH.

*

17

*

This option isstandard onDSA70000 models. A floating licenseis compatible, butnot required.

18

Standard on 25 and33 GHz models.

*

19

For models of bandwidth ≥16 GHz.

*

User Manual Options

Option

Opt. L0
Opt. L1

Descript

English m

French ma
Opt. L3 German manual
Opt. L5

Japanes
Opt. L7 Simple Chinese manual
Opt. L8 StandardChinese manual
Opt. L9
Opt. L10
Opt. L99

Korean

Russia

No manu

Power Plug Options

Option

Description

Opt. A0 US plug, 115V,60 Hz
Opt. A1
Opt. A2
Opt. A3

Euro plug, 220 V,50Hz

UK plug, 240 V,50 Hz

Australianplug, 240 V,50Hz

XXX
XXX
XXX
XXX
XXX

XXX
XXX
XXX
XXX

Service Options

ion

anual

nual

e manual

Option Description

Opt. C3 CalibrationService3Years
Opt. C5 CalibrationService5Years
Opt. D1 CalibrationData Report
Opt. D3 CalibrationData Report 3 Years(withOpt. C3)
Opt. D5 CalibrationData Report 5 Years(withOpt. C5)

manual

Opt. G3 Complete Care 3 Years(includesloaner, scheduled

n manual

al

Opt. G5 Complete Care 5 Years(includesloaner, scheduled

Opt. R3 RepairService 3 Years
Opt. R5 RepairService 5 Years
Opt. IF Upgrade InstallationService

Opt. A5 Swiss plug, 220 V, 50 Hz
Opt. A6 Japaneseplug,100V, 110/120V,60Hz
Opt. A10 China plug, 50 Hz
Opt. A11
Opt. A12
Opt. A99

India plug, 50 Hz

Brazilian plug, 60 Hz

No power cord

Description

Stand-alone SAS Bundled Solution

SATA PHY/TSG/OOB Transmitter Testsfor TekExpress

SATA RSG/RMT Receiver Tests for TekExpress

SATA Rx/Tx Channel Tests for TekExpress

SATA TekExpress SW Bundle (TSG, RSG, RXTX

for Hosts or Devices)

SATA SI Cable Tests for TekExpress

TekExpress Automated USB 3.0 Receiver Solution

TekExpress Automated USB 3.0 Solution

10GBASE-T Automated Solution

calibration and more)

calibration and more)

www.tektronix.com 27

Data Sheet

Recommended Accessories

Probes

Probe Description

P7520
P7516
P7513A
P7313SMA 13GHzTekConnect®differential SMA probe
P7508
P7380SMA 8 GHz TekConnectdifferentialSMAprobe
P7506
P7504
P6780
P6750 D-Max TechnologyLogic Probe
P6717A
P6251

P6250
TCPA300/TCPA400

Series
P5200/P5205/P5210 High-voltagedifferentialprobes

067-0484-xx
067-1586-xx
067-1686-xx PowerDeskew Fixture

Adapters

Adapter Description

TCA-1MEG TekConnecthigh-impedance buffer amplifier. Includes
TCA-292MM TekConnectto2.92 mm adapter

TCA-292D TekConnectto 2.92 mm adapter (33GHzbandwidth)
TCA-BNC TekConnect to BNC adapter
TCA-N TekConnectto N adapter
TCA-SMA TekConnect to SMA adapter
TCA75 8GHzprecisionTekConnect 75 Ω to 50 Ω adapterwith

20 GHz TriMode™ probe

16 GHz TriMode probe

13 GHz TriMode™ probe

8GHzTriModeprobe

6GHzTriModeprobe

4GHzTriModeprobe

DifferentialInputLogicprobe

General-purposeLogicprobe

DCto1GHz,42V,differential probe (requiresTCA-BNC

adapter)

DC to 500 MHz, 42 V,differentialprobe (requires

TCA-BNC adapter)

Currentmeasurementsystems

AnalogProbeCalibrationand Deskew Fixture (4 GHz)

AnalogProbeDeskewFixture(>4GHz)

P6139A passive probe

75 Ω BNC input connector

Cables

Cable Order Number

CentronicsCable
GPIBCable(1m)
GPIBCable(2m)
6 dB Attenuator, Coax,

40 GHz

012-1214-xx
012-0991-xx
012-0991-xx
011-0152-xx

P6780 Logic Probe Standard Accessories

Accessory

D-Max Probe Footprint
to Square Pin Header
Adapter

Mictor to Square Pin
HeaderAdapter

Deskew Fixture Logic
Probes

StandardAdapter
WideBodyAdapter 020-3036-xx
25°/55° Holder
HeatStripWire(4.57m)
HandBrowsingAdapter 202-3031-xx
FlexAdapter 020-3033-xx
Lead Set Ground
Probe Grouper

(includingheaderpins)
FerriteBeads 020-3034-xx
WireTubing(4.57m)

7A Logic Probe Standard Accessories

P671

Accessory

D-Max Probe Footprint
to Square Pin Header
Adapter

Mictor to Square Pin
HeaderAdapter

Deskew Fixture Logic
Probes

ExtensionGroundTip
Probe Tip 131-5638-xx
IC Grabber
ProbeGrouper
Lead Sets
GroundLeadSets

Order Number

NEX-P6960PIN

NEX-HD2HEADER
067-2083-xx
020-3035-xx

020-3032-00
020-3021-00

020-3038-xx
020-3042-xx

020-3037-xx

Order Number

NEX-P6960PIN

NEX-HD2HEADER
067-2083-xx
206-0559-xx

206-0569-xx
352-1115-xx
196-3501-xx
196-3497-xx

28 www.tektronix.com

Accessories

Accessory

Memory Testing

DDR3×4/×8SolderChipInterposer NEX-DDR3MP78BSC
DDR3×4/×8SocketChipInterposer NEX-DDR3MP78BSCSK
DDR3×16SolderChipInterposer NEX-DDR3MP96BSC
DDR3×16SocketChipInterposer NEX-DDR3MP96BSCSK
DDR2×4/×8SolderChipInterposer NEX-DDR2MP60BSC
DDR2×4/×8SocketChipInterposer NEX-DDR2MP60BSCSK
DDR2×16SolderChipInterposer NEX-DDR2MP84BSC
DDR2×16SocketChipInterposer NEX-DDR2MP84BSCSK
InstrumentedDIMMforDDR3 Order Scope NEXVu card for

System Test

TestFixtureforUsewithOpt.USB TDSUSBF
10GBASE-T Fixture for Use with Option

XGbT Software
EthernetTe st Fixture

Crescent Heart Software; SerialATA
ZP test fixture set for Host, Device, and
Cable testing

CrescentHeartSoftware;eSATAZPtest
fixture set for Host,Device, and Cable
testing

HEACTPA-KITconsistsof: Main Board;
Plug A-type board; Plug C-type board;
2 × TDR board withAReceptacle; 2 ×
TDR board with C Receptacle

HDMITypeCFixtureSetforRx/Tx TF-HDMI-TPA-S/STX
Keithley Instruments RF/Microwave

switch system, 32 channel,
unterminated,Americaspower cord

Keithley Instruments RF/Microwave
switch system, 32 channel,
unterminated, Asia-Pacificpower
cord

Keithley Instruments RF/Microwave
switch system, 32 channel,
unterminated, Europe/Africa power
cords

USB 3.0 A/B Fixture/Cable Kit TF-USB3-AB-KIT
USB3.0APlugFixture TF-USB3-A-P
USB3.0AReceptacleFixtureKit TF-USB3-A-R
USB3.0BReceptacleFixtureKit TF-USB3-B-R
10/100/1000BASE-TAdvanced Test

Package (consists of test fixturePCB
set, RJ45 interconnect cable, and
1000BASE-T jitter test channel cable)

Order Number

UDIMM Raw Card E. (Contact
http://www.nexustechnology.com)

TF-XGbT
OrderthroughCrescentHeartSoftware

(http://www.c-h-s.com)
TF-SATA-SET-IV-ZP

TF-ESATA-SET-IV-ZP

TF-HEAC-TPA-KIT

S46-6666-A-AMER

S46-6666-A-ASIAP

S46-6666-A-EURAF

TF-GBE-ATP

Digital and Mixed Signal Oscilloscopes —DPO/DSA/MSO70000Series

TransitCase(carbonfiber)

Accessory

0/100/1000BASE-T Basic Test

1

ackage(consistsoftestfixturePCBset

P

nd RJ45 interconnect cable)

a
103 meter 1000BASE-T jitter test

channel cable
Short (4 inch (0.1 meter)) RJ45

interconnect cable
Test fixturesthatcomplementtheuseof

the TekEXP-XGbTsolution

Other

Oscilloscope Cart
Rackmount Kit 016-1985-xx
ServiceManual
SpareHDD for DPO/DSA/MSO70000

Series
TransitCase (metal frame, woodpanels)

TransitCase(carbonfiber)

Order Number

F-GBE-BTP

T

TF-GBE-JTC
TF-GBE-SIC
TF-XGbT

K4000

071-1740-xx
065-0864-xx

016-2039-00
016-2043-00

www.tektronix.com 29

Data Sheet

Upgrade Options

TheDPO/DSA/MSO70000Seriesinstrumentscanbeeasilyupgradedafterinitial
time of purchase.

Toupgrade an existing DPO/DSA/MSO70000, order DPO-UP and an option listed
below. Forexample, DPO-UP DDRA.

Option

Description

Memory

UpgraderecordlengthonaDPO70000orMSO70000Seriesfrom:
XL02
XL05
XL010
XL020*

10

StandardConfigurationtoOption 2XL Configuration

StandardConfigurationtoOption 5XL Configuration

StandardConfigurationto Option 10XL Configuration

StandardConfigurationto Option 20XL Configuration
Upgraderecordlengthon a DPO70000, DSA70000, or MSO70000Seriesfrom:
XL25
XL210
XL220*
XL510
XL520*
XL1020*

10

10

10

Option 2XL Configuration to Option 5XL Configuration

Option2XLConfigurationto Option 10XL Configuration

Option2XLConfigurationto Option 20XL Configuration

Opt. 5XL Configuration to Opt. 10XL Configuration

Opt. 5XL Configuration to Opt. 20XL Configuration

Opt. 10XL Configuration to Opt. 20XL Configuration

Trigger and Search

UpgradeDPO70000,DSA70000,orMSO70000Serieswith:
LT
MTH

WaveformLimitTesting

Mask testingfor SerialStandardswithHardwareClock

Recovery
ST6G ProtocolTriggeringand Decoding for 8b/10b-encoded

SerialSignals(Up to 6.25 Gb/s)
STU Increase Protocol Triggering and Decodingfrom

3.125 Gb/s to 6.25 Gb/s

Advanced Analysis

UpgradeDPO70000,DSA70000,orMSO70000Serieswith:
ASM AdvancedEventSearchand Mark

16, 25

CP2*
D-PHY*
DDRA*
DJAH*

11

20

22

ANSI/ITUTelecom Pulse Compliance TestingSoftware

MIPI®D-PHYCharacterizationandAnalysisSolution

Upgrade to Option DDRA

DPOJET Jitter and Eye Diagram Analysis

(Upgradefor DPO70404 - DPO70804 or MSO70404 -

MSO70804 models)

10

DJAU*

DPOJET Jitter and Eye Diagram Analysis

(Upgradefor DPO71254 - DPO73304 or MSO71254 -

MSO72004 models)

22

DSAH*

Digital Serial Analysis Bundle

(Upgrade for DPO/MSO70404 - DPO/MSO70804

models)

10

DSAU*

MSO DigitalSerial AnalysisBundle

(Upgradefor DPO71254 - DPO73304 or MSO71254 -

MSO72004 models)

13, 14

DSPT*
DVI

21

EQ*
ERRDTH*

15, 22

DisplayPort Compliance TestSolution

DVI Compliance TestSolution

Equalizationtoupgradefrom Option SLE to Option SLA

Frame and Bit Error Rate Detector (Upgrade for

DPO70404 - DPO70804, DSA70404 - DSA70804, or

MSO70404- MSO70804 models)
ERRDTU*

10, 15

Frame and Bit Error Rate Detector (Upgrade for

DPO71254 - DPO72004, DSA71254 - DSA72004, or

MSO71254- MSO72004 models)
ET3
FBD*
HT3

9, 25

Ethernet Compliance Test Software

FB-DIMMMemory Bus Analysis

HDMI Compliance Test Software

Option

Description

HT3DS HDMI Direct Synthesis for HDMI 1.4

9, 25

IBA*

InfiniBand Compliance Module for RT-EyeAnalysis
Software

J2*
JA3*

25

25

TDSDDM2 Disk
TDSJIT3 Adva

-driveAnalysisSoftware

nced Jitter and Timing Measurements

Software

11

M-PHY*
PCE3*
PTD
PWR

11

QPI*
RJUP

11

MIPI®M-PHYCharacterizationandAnalysisSolution
PCIExpressGen3Essentials
ProtocolDecodingfor8b/10b-encodedSerial Signals
PowerMeasurementandAnalysisSoftware
Intel®Quick Path Interconnect 1.1 TestAutomation
Upgrade DSA70000 Series with RT-Eye Serial Data

Complianceand Analysis Software

25

RTE*

RT-EyeSerial Data ComplianceandAnalysisSoftware
SLA Serial Data Link Analysis Advanced (with Equalization)
SLE Serial Data Link Analysis Essentials (No Equalization)
SR-COMP Computer Serial Triggering and Analysis

(RS-232/422/485/UART)
SR-CUST Custom Serial AnalysisKitforDevelopers
SR-DPHY MIPI®D-PHY(DSI/ CSI2) Serial Analysis
SR-EMBD EmbeddedSerialTriggeringand Analysis (I2C, SPI)
SR-USB USB Serial TriggeringandAnalysis
SSD Additional RemovableDisk – Solid State Drive

9, 25

SST*

SATA and SASAnalysisSoftwareModulefor RT-Eye

AnalysisSoftware

22

SVEH*
SVEU*
SVM*

10

24

SignalVuEssentials – VectorSignalAnalysisSoftware

SignalVuEssentials – VectorSignalAnalysisSoftware

GeneralPurposeModulationAnalysis.

RequiresOption SVE

24

SV
SV

SVT*

O*
P*

24

24

exible OFDM Analysis

Fl

vanced Pulsed Signal Analysis including

Ad

asurements. RequiresOptionSVE

Me

Frequency and Phase Settling Time Measurements.

RequiresOpt. SVE
USB USB 2.0 Compliance TestSoftware

11, 13

USB3*
UWB*

25

USB3.0ComplianceandAnalysisSoftware

Ultra-WidebandSpectralAnalysis

(includesWiMediaAlliancePHY interf. testing)
VETH*
VETU*
VNM*

22
10

23

VisualTrigger

VisualTrigger

TDSVNMCANandLINTimingand Protocol Decode

(Triggeringnotincluded)

Other

IF

*9RequiresOpt. RTE.

10

Formodels of bandwidth≥12.5 GHz only.

*

11

*

RequiresOpt. DJA.

13

For modelsof bandwidth≥8GHzonly.

*

14

*

RequiresOpt. DJA and5XL.

15

Requires Opt. ST6G.

*

16

Requires Opt. MTH.

*

20

*

RequiresOpt. ASM andDJA.

21

RequiresOpt. SLE.

*

22

For modelsof bandwidth≤8GHzonly.

*

23

CAN/LIN triggermoduleavailable –Order ATM1throughCrescent HeartSoftware.

*

24

*

Requires Opt. SVE, SVEH, or SVEU.

25

Only compatiblewith WindowsXP based scopes.

*

UpgradeInstallationService

30 www.tektronix.com

Digital and Mixed Signal Oscilloscopes —DPO/DSA/MSO70000Series

Instrument Bandwidth Upgrades

The analog bandwidth of the DPO/DSA/MSO70000 Series instruments can be
easily upgraded after initial time of purchase. Toupgrade your instrument's
bandwidth,orderoneof the products listed below.

Current Bandwidth Bandwidth After

Upgrade

DPO70000B and DSA70000B Series

4GHz 6GHz
4GHz 8GHz
4GHz 12.5GHz
4GHz 16GHz
4GHz 20GHz
6GHz 8GHz
6GHz 12.5GHz
6GHz 16GHz
6GHz 20GHz
8GHz 12.5GHz
8GHz 16GHz
8GHz 20GHz

12.5 GHz 16 GHz

12.5 GHz 20 GHz
16 GHz 20 GHz

DPO70000C and DSA70000C Series

4 GHz 6 GHz CBWU4T6
4 GHz 8 GHz CBWU4T8
4 GHz 12.5 GHz CBWU4T12
4 GHz 16 GHz CBWU4T16
4 GHz 20 GHz CBWU4T20
6 GHz 8 GHz CBWU6T8
6 GHz 12.5 GHz CBWU6T12
6 GHz 16 GHz CBWU6T16
6 GHz 20 GHz CBWU6T20
8 GHz 12.5 GHz CBWU8T12
8 GHz 16 GHz CBWU8T16
8 GHz 20 GHz CBWU8T20

12.5 GHz 16 GHz CBWU12T16

12.5 GHz 20 GHz CBWU12T20
16 GHz 20 GHz CBWU16T20

MSO70000 and MSO70000C Series

4GHz 6GHz
4GHz 8GHz
4GHz 12.5GHz
4GHz 16GHz
4GHz 20GHz
6GHz 8GHz
6GHz 12.5GHz
6GHz 16GHz
6GHz 20GHz
8GHz 12.5GHz
8GHz 16GHz
8GHz 20GHz

12.5 GHz 16 GHz

12.5 GHz 20 GHz
16 GHz 20 GHz

DPO70000D and DSA70000D Series

25 GHz 33 GHz

Model Number

BWU4T6

BWU4T8
BWU4T12
BWU4T16
BWU4T20

BWU6T8
BWU6T12
BWU6T16
BWU6T20
BWU8T12
BWU8T16
BWU8T20

BWU12T16
BWU12T20
BWU16T20

MBWU4T6

MBWU4T8
MBWU4T12
MBWU4T16
MBWU4T20

MBWU6T8
MBWU6T12
MBWU6T16
MBWU6T20
MBWU8T12
MBWU8T16
MBWU8T20

MBWU12T16
MBWU12T20
MBWU16T20

DBWU25T33

Product(s) are manufactured inISO registered facilities.

Product(s) complies with IEEEStandard 488.1-1987, RS-232-C, and withTektronix
Standard Codes andFormats.

www.tektronix.com 31

Data Sheet

Contact Tektronix:

ASEAN / Australa

Balkans, Israel, South Africa and other ISE Countries [phone]

Central East Eu

Mexico, Central/South America & Caribbean 52 (55) 56 04 5090

Middle E as t,

* European toll-freenumber. If notaccessible, call: [phone]

rope and the Baltics [phone]

Central Europe & Greece [phone]

Asia, and North Africa [phone]

The Netherlands 00800 2255 4835*

People’s Rep

Republic of

United K ingdom & Ireland 00800 2255 4835*

sia (65) 6356 3900

Austria 008002255 4835*

Belgium 0080022

Brazil [phone]

Canada 1 800 833 9200

Denmark [phone]
Finland +41526

France 00800 2255 4835*

Germany 00800 2255 4835*

Hong Kong 400 8

India 000800 650 1835

Italy 008002255 4835*

Japan 81 (3) 67

Luxembourg [phone]

ublic of China 400820 5835

Poland [phone]

Korea 001 800 82552835

Russia & CIS [phone]

South Africa [phone]

Spain 00800

Sweden 00800 2255 4835*

Switzerland 00800 2255 4835*

Tai wa n 886 (

55 4835*

75 3777

20 5835

14 3010

Norway 80016098

Portugal 8008 12370

2255 4835*

2) 2722 9622

USA 1800 833 9200

Updated 10 February2011

www.tektronix.com

For Further Information. Tektronix maintains a comprehensive, constantly expanding
collection of application notes, technical briefs and other resources to help engineers working
on thec utting edgeof technology. Pleasevisit www.tektronix.com

t © Tektronix, Inc. All rights reserved. Tektronix products are covered by U.S. and foreign patents,

Copyrigh

d pending. Information in this publication supersedes that in all previously published material.

issued an

tion and price change privileges reserved. TEKTRONIX and TEK are registered trademarks of

Specifica

x, Inc. All other trade names referenced are the service marks, trademarks, or registered trademarks

Tektroni

espective companies.

of theirr
18Aug 2011 55W-23446-11