Tektronix DSA70404B Data Sheet

Digital and Mixed Signal Oscilloscopes

DPO/DSA/MSO70000 Series Data Sheet

Pinpoint®Triggering– Minimizetime spent trying to acquire problem signalsfor efﬁcienttroubleshooting and shorteneddebug time

6.25 Gb/sReal-time Serial Trigger – Assures triggering onthe ﬁrst instance ofa speciﬁed NRZ or 8b/10b pattern to allow isolation of pattern-dependent effects

Search &Mark –Provides waveform pattern matching andsoftware triggers forsignals ofinterest

P7500 TriMode™ Probing System – Perfectly matched s ignal connectivity from 4 GHzto 20GHz

Application Supportfor High-speed SerialIndustry Standards, RF, Power Supplies, andMemory –Enables standard-speciﬁccertiﬁcation, measurement automation, and ease of use

Features & Beneﬁts

On AllFour Channe ls Simultaneously

20, 16, 12 Up to 50 GS/s onReal-time SampleRate Up to250 Megasample Record Length with MultiViewZoom™ Feature for Quick Navigation FastestWaveform CaptureRatewith >300,000wfms/s Maximum per Channel

Uncompromised Bandwidth – Upto 20GHz onall 4 channels enables measurement on thelatest high-speedserial standards

Superio the truest representation of your waveform

Industry-leading Sam ple Rate and TimingResolution

100GS/s on2 Channe ls (20,16, and12.5 GHz models)

16Logic Channelswith 80 psTimingResolution forDebug of Digitaland Analog Signals (MSO70000 Series only)

.5, 8, 6,and 4GHz BandwidthModels

rSignal Integrityand Excellent Signal-to-NoiseRatio –Observe

P6780 andP6717 High-performance 17-channel Logic Probeswith Bandwidths upto 2.5 GHz for Connectionsto Today’s FastDigital Signals (MSO70000 Series only)

Applications

DesignVeriﬁcationincluding Signal Integrity, Jitter, and TimingAnalysis DesignCharacterization forHigh-speed, Sophisticated Designs CertiﬁcationTestingofSerial DataStreams for IndustryStandards Memory Bus Analysis and Debug Prototype Turn-on andPower Supply Veriﬁcation Research and Investigationof TransientPhenomena Production Testingof ComplexSystems Spectral Analysis ofTransientor Wide-bandwidthRF Signals

Data Sheet

P7500TriModeprobessimplifycomplexmeasurementsetups.

P6780DifferentialLogicprobesprovidehigh-bandwidthconnectionsforupto 16 digital signals.

Tools for Your Complete Design Cycle

Tektronix understandsthat engineersrely onan oscilloscopethroughout their designcycle, from prototype turn-on to production testing. The DPO/DSA/MSO70000 Series oscilloscopes’unique capabilitiescombined

h exceptional signal acquisition performance andanalysis accelerate

wit your measurement tasks.

Unmatched Acquisition and Signal-to-Noise Performance

The superiorsignal integrity and excellentsignal-to-noise ratio of the DPO/DSA/MSO7 results.

Highbandwidth, upto 20GHz,matched across4 channels Bandwidth enhancement eliminates imperfections in frequency

response all theway to theprobe tip. Theuser-selectable ﬁlterfor each channel prov representation ofextremely fastsignals. In addition, onlyTektronix allowsthe userto disablethe bandwidth enhancement for applications needing the

Simultaneous high sample rate on all channels captures more signal details (transients, imperfections, fast edges)

100 GS/s on 2 channelsand 50GS/s onall analogchannels for the

12.5, 16,and 20GHz models 25GS/s onallanalog channelsfor the 4,6, a nd 8GHz models

12.5 GS/s onall logic channelsin theMSO70000 Series

Lowestjitter noiseﬂoor andhighestvertical accuracyprovide additional margin in your measurements

Long recordlength provides high resolution and extended-duration waveform capture

Standard 10MS perchannel on the DPO70000 andMSO70000 Series and 31MS onthe DSA70000Series Optional up to 125 MS on all four channels for the 4, 6, and 8 GHz models Optional upto 250 MS on allfour channels for the 12.5,16, and 20 GHzmodels On the MSO70000Series, therecord length oflogic channels match the analogrecord lengths for uncompromised analog and digital acquisition MultiView Z oom helps you manage long records, compare and analyze multiplewaveform segments

With h DPO/DSA/MSO70000 Series enable you to perform precise characterization measurem ents. When debugginga DUT,a lownoise

and maximum signal ﬁdelity of the measurement instrument

ﬂoor allows you to ﬁnd the smallest anomalies that might affect the DUT’s performance. For RF signals,a lowernoiseﬂoor translatesinto a higher

amic range , opening theDPO/DSA/MSO70000 Seriesto awider

dyn range ofapplications

WidestRange ofProbing Solutions –Whether youneed to measure8 G b/s serial data, fast digitallogic, orswitching currentsfrom yournew power supply design, Tektronix offersavast arrayof probingsolutions, including

ive single-ended, differential,logic, highvoltage, current,optical, anda

act wide range ofprobe andoscilloscope accessories.

0000 Series ensures conﬁdence in your measurement

ides magnitu de and ph ase correction for more accurate

highest measurement throughput

igh signal-to-noise ratio and low internal noise ﬂoor, the

2 www.tektronix.com

Digital and Mixed Signal Oscilloscopes —DPO/DSA/MSO70000Series

Quick S election G uide

Model Analog Bandwidth

DPO70404B 4 GHz 25 GS/s 10 MS DSA70404B 4 GHz 25 GS/s 31 MS MSO70404 4 GHz 25 GS/s 10 MS DPO70604B 6 GHz 25 GS/s 10 MS DSA70604B 6 GHz 25 GS/s 31 MS MSO70604 6 GHz 25 GS/s 10 MS DPO70804B 8 GHz 25 GS/s 10 MS DSA70804B 8 GHz 25 GS/s 31 MS MSO70804 8 GHz 25 GS/s 10 MS DPO71254C 12.5 GHz 100 GS/s / 50 GS/s 10 MS DSA71254C 12.5 GHz 100 GS/s / 50 GS/s 31 MS MSO71254C 12.5 GHz 100 GS/s /50 GS/s 10 MS DPO71604C 16 GHz 100 GS/s / 50 GS/s 10 MS DSA71604C 16 GHz 100 GS/s /50 GS/s 31 MS MSO71604C 16 GHz 100 GS/s / 50 GS/s 10 MS DPO72004C 20 GHz 100 GS/s / 50 GS/s 10 MS DSA72004C 20 GHz 100 GS/s /50 GS/s 31 MS MSO72004C 20 GHz 100 GS/s / 50 GS/s 10 MS

Analog Sample Rate

2/4 Channels

Standard Memory –

Analog + Digital

Analog Channels Logic Channels

4 4 416 4 4 416 4 4 416 4 4 416 4 4 416 4 4 416

System Turn-on and Veriﬁcation

Fromthetimeadesignisﬁrst poweredup throughthe initialoperational checks,the DPO/DSA/MSO70000Seriesprovide thefeaturesyou need.

Uncompromised Four-channel Acquisition

With the industry’slowest noiseand up to 50 GS/ssample rate onall four channels the DPO70000 Series ensures that signal integrity checks and timing analysis can be donewithout worryingabout noise and jitter in th e scope distortingthe measurements. Single-shot bandwidthsup to 20 GHz on all four channels ensure that you’ll capture your signals of

t without worryingabout undersamplingwhen usingmore than 1or

interes 2 c hannels.

ications requiring the lowestinternal noiseand jitter,100 GS/s

For appl performance further reduces noise andjitter and providesadditional measurement headroom.

16-channel Digital Acquisition (MSO70000 Series only)

When youhave many interfaces to verify, theMSO70000 Series with 4analog and16 logicchannelsenables efﬁcientchannel-to-channel timing checks. With timing resolution of80 ps, the MSO70000 Series’digital

ionsystem enablesyouto make precisetiming measurements onas

acquisit many as 20 chann els simultaneously.

iCapture – One Connection for Analog and Digital (MSO70000 Series only)

The number of signals thatmust beveriﬁed canoften makethe checkout of a design longand involved. By usingthe iCapture digital-to-analog multiplexer feature, youcan easilyverify theanalog characteristics of any of the 16 signalsconnected tothe MSO70000 Series’ digital channels.

apture, you canquickly view theanalog characteristics ofany in put

UsingiC channel. If the signal is working as expected, relegate itto a digital-only view and continue testing other lines.

www.tektronix.com 3

Data Sheet

Symbolicbu

sformatssimplifyidentifyingsystem states and setting up bus triggers.

Bus Decoding and Triggering (MSO70000 Series only)

Verifyingyour systemoperation oftenrequires theability tosee speciﬁc system stateson a key bus suchas the DDR SDRAM interface. Th e MSO70000 Series includesparallel and low-speedserial busdecodingthat providesdeeper insightinto the system’sbehavior. Usingthebus triggering capabilityof theMSO70000 Series toisolate theexactstate neededor ﬁnd invalid bu

s sequences is as easyas deﬁningthe busand choosingthe bit

patternor symbolicword that describesthe desiredstate.

Deep Record Length Available on All Channels

Longer du

ration eventssuch aspower supply sequencing and system status words can b e analyzed withoutsacriﬁcing timingresolution using the longmemory depths availableon all fouranalog channels inthe DPO/DSA70000 Series aswell asthe16 logicchannels oftheMSO70000 Series. Optional memorydepths upto 125 MS(Option 10XL)on the4, 6, and8 GHzmodels and 250MS (Option20XL) on the12.5, 16,and 20 GHz models ar

e available.

Power supplies canbe acriticalfailure pointin any system. Carefultesting

werdelivery system’spoweron sequencecan be timeconsuming.

ofthe po The M SO70000 Series provides independentlogic thresholdsfor each logic channel enabling multiple logic voltages to be set up and observed simultaneouslyfor quickveriﬁcationof thesystem’spower rails.

10msdurationcaptureofsynchronoushigh-speedand low-speed signals at 25 GS/s.

Protocol and Serial Pattern Triggering

To verifyserialarchitectures, theserial pattern triggeringfor NRZ serialdata streams with built-in c lock recovery inthe DPO/DSA/MSO70000Series allowscorrelating eventsacross physicaland link layers. The instruments can recoverthe clock signal, identify transitions, and allow youto set the desired encoded wordsfor theserial patterntrigger tocapture. This feature comes standard on the DSA70000 Series and is available onthe DPO70000 and MSO70000 Seriesas OptionST6G. Forhigher bit rate standards like USB3.0, the 8b10bserial patterntriggerand decodecovers data ratesup to6.25 Gb/s.

Pattern lock triggering adds an extra dimensionto NRZ serialpattern triggering by enabling the oscilloscope to take synchronized acquisitions of a long serial testpattern withoutstanding timebase accuracy. Pattern lock triggeringcan be used to remove random jitter from long serial data pat terns. Effects ofspeciﬁc bit transitions can be investigated, and

ng can beused withmask testing. Pattern locktriggering supports

averagi upto 6.25Gb/s NRZ serialdata streamsand is standardon theDSA70000 Seriesinstruments, orisincluded aspartof OptionST6Gon theDPO70000 and MSO70000 Series.

4 www.tektronix.com

Digital and Mixed Signal Oscilloscopes —DPO/DSA/MSO70000Series

System Characterization and Margin Testing

Whena designis working correctlyand thenext task isto fully characterize its performance, the DSA70000 Series offers the industry’s most comprehensive setof analysis and certiﬁcation tools, such asmath expressions,waveform masktesting, pass/fail testing,event searching,and event marking processof makinghundreds ofcharacterization measurements.

Advanced Waveform Analysis

Fullanalysis ofthepower, voltage, andtemperature cornersof your system under test canbe ve ry timeconsuming. The DPO/DSA/MSO70000Series offera widerangeof built-inadvanced waveform analysistools.

Waveform cursorsmake it easy to measure trace-to-trace timing characteristics, while cursorsthat linkbetween YTand XY displaymodes make it easyto investigatephase relationshipsand SafeOperating Area violations. Select from 53automatic measurements using a graphical palette thatlogically organizes measurementsinto Amplitude, Time, Histogram, measurementresults withstatisticaldata suchasmean, min,max, standard deviation, andpopulation.

Deﬁne and a in terms that youcan use. Access common waveform mathfunctions with the touchof abutton. Or, for advanced applications, createalgebraic expressions consistingof livewaveforms, reference waveforms, math functions,measurement values,scalars, and user-adjustablevariables with an easy-to-use calculator-style editor.

With deep acquisition memory, margin testing can be done overmany cycles and long duration trends in the data can be observed. Plus, data from the oscilloscopecan be capturedinto Microsoft Excelusing the unique Excel tool provided with theDPO/DSA/MSO70000 Series.

Automated Tools to Increase Measurement Throughput

Ease of use and measurement throughput are key when a largenumber of measurements must be completed with aperformance oscilloscope.

. Toolsfor automation reduce the tediumand speedup the

andCommunications categories. Gatherfurther insight intoyour

pplymath expressionsto waveform data foron-screen results

bar,and formattedinto customreports usingthe Wordtoolbar

DPOJET Jit

concerns, highestse

ter and Eye Diagram Analysis – Simplifyidentifying signalintegrity

jitter,and their related sources with DPOJET software. DPOJET provides the

nsitivityandaccuracyavailableforreal-timeoscilloscopes.

The DSA70000 Seriescomes standardwith theDPOJET Advanced Jitter and Eye Diagram measurem ent application, providing the tools youneed to quickly perform a high volume of measurements and collect statistics. DPOJET Essentialsis standard on the DPO70000 and MSO70000 Series wi

th the DPOJET advanced version availableas an option. Application-speciﬁc measurement packages are alsoavailable that extend DPOJET andperform the extensiveset of tests required by industry standard groups.

RF and Vector Signal Analysis

When vector signal analysis of RF or baseband signals are needed the optionalSignalVu application enables measurements in multiple domains (frequency, time,phase, modulation)simultaneously. SignalVu measurements are fullycorrelated with thescope’s time domainacquisition

gering. Time domain events, such as commands to a RF

and trig subsystem, can beused as triggerevents, whilethesubsystem’s RF signal can be seen in the freq uency domain.

www.tektronix.com 5

Data Sheet

TekExpres

USB 3.0 pro and receiv Universal selection selectio USB-TXle

3.0 solut

TekExpress SATA Automated Compliance Test Software – Completesupport for SATA Gen1 and SATAGen2 deﬁned testsuites fortransmitters and receivers. Reduce your compliancetesttime by approximately 70% with simple, efﬁcient automationofallrequired testsuiteswithTekExpress software. Alsoincluded is auto-recognition of all required test equipment,preciseDUT/Hostcontrol,and one-button testing.

s USB 3.0 Automated Test Software (Option USB-TX) –TekExpress

videsan automated, simple, and efﬁcientway to testUSB 3.0transmitter

er hosts and devices consistentwith therequirements of theSuperSpeed

SerialBusElectricalCompliance TestSpeciﬁcation. The application automates

ofappropriateCTLEandreferencechannelemulationﬁltersandmeasurement

ns based on device type, test type, test points, and selected probes. In addition,

veragesDPOJET allowing for debug and advanced characterization of USB

ions.

TekExpress™ Software Automation Framework

ekExpress software automation framework hasbeen developedfor

The T automated one-button testing of high-speed serial data standards. Built on top of National Instruments TestStandproduct, TekExpress efﬁciently executes the required tests formany serialstandards likeSATA Rev3.0,

SDLA - Serial Data Link Analysis (Option SLE and SLA) – Offers the capability to emulate the serial datachannel, de-embeda ﬁxture or other network,and addor removetransmitterequalization. OptionSLAadds processing of waveforms with FFE and DFE equalizations and automatic equalizer training. DPOJET provides advanced measurementand jitteranalysisof the resulting waveforms.

USB 3.0, DisplayPort, and 10GBASE-T Ethernet. Run onan external Windows PC, theTekExpressSATA software orchestrates the instrument setup and controlsequences toprovide complete test resultsfor complete design validation.

Beyond using the TekExpress framework, custom applications that you develop yourselfusing applicationdevelopment environments suchas MATLAB

can further extend the tool setof theDPO/DSA/MSO70000

Series. Characterization measurements depend upon accuracy and

repeatability. The wide bandwidth and unmatched signalﬁdelity of the DPO/DSA/MSO70000 analog front end ensures that your signal quality measurements suchas rise times are faithful and amplitude correct with ﬂatness of ±0.5 dB.

Custom Filter and De-embed Capability

ate your ownﬁlters or use the ﬁlters providedas standard with the

Cre DPO/DSA/MSO70000 Series toenhance yourability toisolate orremove a c omponent of your signal(noise orspeciﬁc harmonics ofthe signal). Thesecustomizable FIRﬁlters canbeused toimplement signal-processing techniques,such asremoving signal pre-emphasisor minimizing theeffects ofﬁxtures andcablesconnected tothedevice undertest. Usingthe optional

ial Data LinkAnalysis (SDLA)application, youcan gainfurther insight

Ser into serial datalinks withthe capabilityto emulate the serial datachannel from its S-parameters, de-embed theﬁxture orother network,and addor remove transmitter equalization(de-emphasis/pre-emphasis).

6 www.tektronix.com

Digital and Mixed Signal Oscilloscopes —DPO/DSA/MSO70000Series

Certiﬁcation

Beforeaproductcangotomarket,youoftenneedtocompleteaseriesof certiﬁcation tests onthe industry-standardhigh-speed serialbuses inyour design. These testscan involve manyhours ofwrestling withtest ﬁxtures, reading certiﬁ that your system passes therequired tests.

Application-speciﬁc Solutions – Enable Standard-speciﬁcCertiﬁcation, Measurement Automation, and Extended Signal Analysis

Accurate,Simple,and CustomizablePhysicalLayer Certiﬁcation Testing– For designers withindustry-standard certiﬁcationneeds, standard-speciﬁc compliance a mask andmeasurement limit testing areavailable as optionson the DPO/DSA/MSO70000Series. Modules areavailable for PCIExpress, DDR Memory,Serial ATAand SAS, InﬁniBand,HDMI,Ethernet, DisplayPort, DVI, UWB,MIPI

See thefollowing listfor highlights of the availableapplication-speciﬁc solutions.

cation documents, and collecting sufﬁcient data to validate

nd analysis modules that conﬁgure thepass/fail waveform

D-PHY and M-PHY, Power Supplies, and USB.

USB 3.0 Transmitter Test Solution (Option USB3) – Perform veriﬁcation, characterization,anddebug of USB 3.0devices. Measurements are implementedin DPOJETandarecomplianttotheUSB3.0speciﬁcation. Forcomplianceandautomation, USB-TX is available.

DDR Memory Bus Analysis (Option DDRA) – Automatically identify DDR1, LPDDR1, LPDDR2,DDR2,DDR3,andGDDR3 Reads and Writesandmakes JEDEC conformance measurementswithpass/failresultsonall edges in every Read and Write burst. DDRA providescapabilitiesfor measurements of clock, address, and control signals. Inaddition toenablingconformancetestingDDRA withDPOJET is the fastest way to debug complex memory signaling issues. DDRA can also use theCommand/Addresslinesto trigger on speciﬁc read/write states whenrunning on the MSO70000SeriesMixed Signal Oscilloscope,whichoffers16channelsofdigitallogicprobing.

PCI Express Analysis Test Solution (Option PCE) –Analyze the performance of your PCI Express Rev 1.0, 2.0, or3.0 (draftspec) design withcomprehensive test support. UsingDPOJET, Option PCE enables tests that conform to PCI-SIG standards.

www.tektronix.com 7

Data Sheet

MIPI®D-PHY Debug, Analysis, Characterization, and Compliance Test Solution (Option D-PHY) –VerifytotheD-PHYspeciﬁcationby rapidly characterizing and

discoveringsources of jitter and signalintegrity concerns usingthe fullyﬂexibleand customizabletestsetup. UsingDPOJET,OptionD-PHYenablestransmitterhigh-speed data-clocktimingmeasurements,along with a full range ofelectrical characteristics in high-speedor low-power modes.

MIPI

M-PHY Debug, Analysis, Characterization and Conformance Test Solution –

Verifytothe M-PHY speciﬁcationbyrapidlycharacterizingand discovering sources of jitter andsignalintegrityconcerns. UsingDPOJET,M-PHYenablestransmittersignalingand timingmeasurementssuchasdifferentialtransmit eye diagrams, rise and fall times, slew rate,amplitudeparameters,commonmodevoltageson each lane for both the large and smallamplitudeconﬁgurations,as wellas the terminated and unterminated cases.

Ethernet Compliance Test Solution (Option ET3) – Receive full PHY layersupport for Ethernetvariants10BASE-T, 100BASE-TX, and 1000BASE-T with the comprehensive, integrated Tektronix Ethernet toolset. Analog veriﬁcation, automatedcompliance software,anddevicecharacterizationsolutionsareallincluded.

8 www.tektronix.com

XGbT 10GBASE-T Automated Compliance Software – Quickly perform 10GBASE-T measurementsper the IEEE 802.3an-2006 standard including Power Spectral Density (PSD), Power Level, and Linearity, with asimpliﬁed instrument conﬁguration. XGbT providesﬂexiblecontrolovertestconﬁgurationsandanalysisparameters,enablingmore in-depth device characterization.

Digital and Mixed Signal Oscilloscopes —DPO/DSA/MSO70000Series

HDMI Compliance Test Solution (Option HT3) –Fast, efﬁcient solution for HDMI compliancemeasurementchallenges,nomatterif you are working on a Source,Cable, or Sink solution. This application provides all the HDMI compliancetest solutions you need to ensure quality and interoperability.

Ultra-Wideband Spectral Analysis Software (Option UWB) – Analyze hundredsof packets,TFC,anddata-ratecombinations. Inaddition,theautomatic WiMedia modulation analysisconﬁgurationwillanalyzehowcomplexwidebandsignalschange frequency and amplitudewithtimeusing real-timespectrogramsspanning20GHz.

DVI Compliance Test Solution (Option DVI) – Obtain quick and dependableresults withthe DVI compliance test software. Automated testing based on pass/fail detection dramaticallyenhances productivity.

DisplayPort Compliance Test Solution (Option DSPT) – Support DisplayPort ComplianceTest Standard (CTS) source test with four-linesimultaneoustestingusingthe Tektronix P7300SMA Series probes and DisplayPort software. Detailedtestreportswith waveformplots,pass/failresults,andmarginanalysisare included.

www.tektronix.com 9

Data Sheet

Power Measurement and Analysis Software (Option PWR) –Improvetheefﬁciency of switchingpowersupplieswith increased power densities. Measureand analyze power dissipationinpowersupply switchingdevicesand magnetic components, and generate detailedtestreports in customizable formats.

SignalVu™ Vector Signal Analysis – Easily verifywide-bandwidth designssuch as wideband radar, high data-ratesatellite links,or frequency-hoppingradiosand characterizewidebandspectralevents. SignalVu combines the functionality of a vector signal analyzer, a spectrum analyzer, andthepowerful triggering capabilitiesof the DPO/DSA/MSO70000Series– all in a singlepackage.

DSA70000 – A Dedicated Solution Conﬁgured for Today’s High-speed Serial Design Challenges

TheDSA70000 DigitalSerial Analyzersare speciallyconﬁgured toaddress high-speed serial datadesigns byencapsulating manyof t he serialdomain features neede d for high-speedserial veriﬁcation and characterization. These standardfeatures on the DSA70000 Series are options onthe DPO70000 and MSO70000 Series.

Communica

Serial Pattern Triggering – Real-timeserial patterntriggering andprotocol

tions Mask Testing.

decode withbuilt-in clockrecovery recovers the clock signal,identiﬁes the transitions, and decodes characters and otherprotocol data. Youcan see the 8b/10b bitsequences decoded into their wordsfor convenient

, or you can set the desired encoded wordsfor theserial pattern

analysis trigger to capture. With patternlock triggering,the DSA70000Series can synchronizeto longserial te st patternswith datarates upto 6.25 Gb/sand remove randomjitter.

DPOJET Ji

tter, Timing, and Eye Diagram Analysis –

TheDSA70000 Series features th e highest-accuracy jitter and timing measurements aswell as comprehensive analysis algorithms. Tight timing marginsdemand stable, low-jitter designs. You can make jittermeasurements over contiguous clock cycleson everyvalid pulse in a single-shotacquisition. Multiple measurements and trend plots quicklyshow systemtiming undervariable

ons, including Randomand DeterministicJitter separation.

conditi

Communications Mask Testing – Providesacomplete portfolioofmasks for

verifyingcompliance toserial communicationsstandards. Over 150masks for thefollowing standards are supported –PCI Express, ITU-T/ANSI

Ethernet IEEE 802.3, ANSI X3.263, Sonet/SDH, Fibre Channel,

T1.102, InﬁniBand, USB, SerialATA, SerialAttached SCSI, IEEE1394b, RapidIO, OIFStandards, OpenBaseStation ArchitectureInitiative (OBSAI), Common Public Ra dio Interface (CPRI).

31 MS Rec

ord Length –

31 MS onall fourchannels provides alonger time sequenceat highresolution. Optional record lengthsup to 125MS for the4, 6, and 8GHz models, 250 MSfor the12.5,16, and20 GHzmodels extend the acquisition time sequence.

With standard features that extend thefunctionality of theTektronix DPO70000 Seriesto address high-speed serial signal analysis and certiﬁcation, the DSA70000 Series offersa specializedinstrument that efﬁcientlyaddresses yourdesign challenges.

10 www.tektronix.com

Digital and Mixed Signal Oscilloscopes —DPO/DSA/MSO70000Series

DSA Feature Set in the MSO70000

If you need to combine the functionality of the DSA70000 and the MSO70000 Series, theDSA optionsfor the MSO70000Series providethe DSA’s high-speed serial test features inan MSO(see OptionDSAH or DSAUin theOrde

ring Information section below).

User-selectable Bandwidth Limit Filters

While wide bandwidth isneeded tocharacterize yourhigh-speed serial designs, certiﬁcation testing can require a speciﬁc instrument bandwidth appropriate forthe signal’s data rate in order to correlate test results between diffe user-selectable bandwidthlimiting ﬁlters. Using these bandwidth limit ﬁlters which range from500 MHz to 19 G Hz, you willensure that your measurement isdone using thebandwidth speciﬁed by the industry standard.

rent test labs. The DPO/DSA/MSO70000Series feature

Debugging

Throughout the design cycle, DPO/DSA/MSO70000Series oscilloscopes provide the a cause. Using FastAcq’shigh waveform capture rate, youcan quickly identifysignal anomaliesthat occurintermittently – savingminutes, hours, or even days byquickly revealing the nature offaults so sophisticated trigger modes canbe applied to isolate them. U sin g Pinpoint triggers, infrequent events suchas glitches orsignal runts causedby buscontention orsignal in

bility to debug malfunctioningsubsystems and isolate the

tegrityissues canbe captured, analyzed,and then eliminated.

B Event Scan identiﬁes speciﬁc events to build aneye diagram.

FastAcq – Expedites Debugging by Clearly Showing Imperfecti

Morethan justcolor grading orevent scann ing, FastAcq’sproprietary DPX acquisiti persecond onall four channelssimultaneously,dramatically increasing the probability of discoveringinfrequent fau lt events. And with asimple turnof theintensity knobyou can clearly“see aworld others don’tsee”, displaying thecomplete pictureof your circuit’soperation. Some oscilloscopevendors claim highwaveform capture rates for short bursts oftime, but only DPO/DSA/M candeliver thesefast waveform capturerates onasustained basis.

ons

on technology captures signals atmore than300,000 waveforms

SO70000 Series oscilloscopes,enabled byDPX technology,

Pinpoint®Trigger

Whether you’re tryingto ﬁnda problemsignal orneed toisolate a section of a complex signal for further analysis, like a DDR Read orWrite burst,

x P inpoint triggering providesthe solution. The Pinpoint trigger

Tektroni system uses Silicon Germanium (SiGe) technology to provide very high trigger sensitivity with very lowtrigger jitterand theability tocapture very narrow glitches. Pinpoint triggeringallows selectionof virtually all trigger types on both A andB triggerevents deliveringthe fullsuite of advanced trigger types forﬁnding sequentialtrigger events. Pinpoint triggers provide

eset capabilities thatbegin the trigger sequence againafter a

trigger r

Use B Event Scan trigger on DDRDQSedges used to construct an eye diagramof all bits in a burst.

speciﬁed time, state,or transitionso that evenevents inthe most complex signals can be captured. Other oscilloscopestypically offerless than 20 trigger com binations; Pinpoint triggeringoffers over 1400 combinations, all at full performance.

With EnhancedTriggering, trigger jitter is reduced to <100fs. With this stabilityat thetrigger point, thetrigger point canbe used asa measurement reference.

B Scan Event Trigger

Users who wishto createeye diagramsfrom databursts synchronized or initiated by anA eventwill ﬁnd theB EventScan trigger functionespecially useful. B Event Scan is an A to B trigger sequencethat willtrigger and capture burst event data of interest deﬁned by the B Event setup menu. Captured bitscan be scanned in asequential or randomized fashion,

ivelythe triggercantoggle betweentwosuccessive B triggerevents.

alternat

www.tektronix.com 11

Data Sheet

Integrated Logic Channels – Provide time-correlatedanalog and digitalvisibility for system debugging.

Logic Pattern Triggering

Logic patterntriggering allows logic qualiﬁcation thatcontrols when to look for the faults and ignore eventsthat donot occurduring thedesired state. On theMSO70000 Series,up to20-bit wide logic pattern triggering enhancesthe Pinpointtrigger capabilities byhelping you isolatethe s peciﬁc

tateand analogevents that arecausing system failure.

systems

Digital A then Analog B Triggering (MSO70000 Seri

Advanced triggering capabilities includeDigital Athen AnalogB tohelp youto identif analog event suchas arunt pulse totrigger theacquisition.

yaspeciﬁc digitalpatternor systemstate and thenwait for an

es only)

Integrated Logic C hannels (MSO70000 Series only)

The MSO70000S oscilloscopewith anadditional 16logicchannels thatcanbe usedto provide systemlevel contextwhen the faultoccurs. This context,such as anillegal system state orerror,may bethe cluethat leads tothe rootcause. When otheroscilloscopes requireyouto usealogic analyzerto see thedigital data you need to solve your debugging challenge, the MSO70000 Series can effectively quickly and easily. With 80ps timingresolution andchannel-to-channel skewsof aslittle as 160ps, theintegrated logic channelsallow youto view and measure time-correlated d igital and analog data in the same display window.

eries extendsthe debug capabilities of a4-channel

debug and verifymany digital timingissues inthe system more

iCapture (MSO70000 Series only)

When ananomaly isseen ondigital lines,iCapture deliversnew insight intothe analogbehavior of thedigital signals. WithiCapture, youcan route any4 ofthe 16logicchannels tothe MSO70000Series’ analogacquisition systemso th multiplexer circuitry provides simultaneousdigital and analog views of signalswithout havingtomove thelogic probe ordouble probe thecircuit.

atthese signalscanbe viewedinﬁner detail. iCapture’sunique

12 www.tektronix.com

Digital and Mixed Signal Oscilloscopes —DPO/DSA/MSO70000Series

AdvancedS navigates

FastFrame

When the keyevents youare interested inare widelyspaced intime, such as bursts of activity ona bus,FastFrame segmented memory feature on the DPO/DSA/MSO70000 Series enablesyou to capture the events of interestwhile conservingacquisition memory. Using multiple triggerevents, FastFrame captures andstores shortbursts ofsignals and saves them as framesf andbus orlogictriggering enableyou to captureyour fastest, burstysignals on the analogchannels atthe highestsample rate while the logicchannel triggerrecognizes thebus cycle ofinterest. Capturing thousandsof frames is possible, solong-term trendsand changesin the bursting signal canbe analyzed.

Advanced Search and Mark

Isolating the keyevent causingyour system failurecan oftenbe atedious task. With theAdvanced EventSearch andMark featureexamining data and highlighting important events,skipping the unimportant ones, and enhancing the comprehension of event relationships is made easy. With ASM, yo and uncover thatrare eventyou ha v e beentrying toﬁnd.

Embedded Serial Bus (I2C, SPI) Decoding and Triggering (MSO70000 Series only)

TheMS and bus triggering that enable you to monitor or debug subsystems and components, su ch as frequency synthesizers, D/A converters, and FlashMemory that arecontrolled or monitored using I serial buses. While monitoringor debuggingthese serialbuses alone is relatively easy, decodingevents onthe serialbus canalso enablemore compl higher-speedserial interface,the clue towhat isgoingwrong maybe found

earchand Mark – Highlights important events, skips unimportant ones, and

between events of interest effortlessly.

orlater viewingandanalysis. On the MSO70000Series, FastF rame

u’ll be ableto navigatebetween theevents of interest effortlessly

O70000Series instrumentsprovide I

Cand SPIserialbus decoding

CorSPI

ex system-level debugging. When you experience an issue with a

Thelow-costsoldertipsavailablefor the P7500 TriMode probes allow quick connectionso movingthe probe to various solder points is f ast andeasy.

SoldertipaccessoriesdesignedfortheP6780 differentiallogicprobesprovideaccessto signalson tightly spaced vias and ﬁne-pitched components.

by using theserial busdecode featureto observethe dataon yourI2Cor SPI interface.

Probing – Analog And Digital

Often the biggestchallenge indebugging a systemis gettingaccess to the requiredsignals. Tektronixoffersa wide arrayof probing solutions,including

00 TriMode probing systemwith bandwidths that are perfectly

the P75 matched to theDPO/DSA/MSO70000 Series. The P7500 TriMode probes allow you to switch amongdifferential, singleended, andcommon-mode measurements without moving the probe from itsconnection points. The P7500 Series offersprobes withperformance from4 GHzto 20 GHzand offersseveral low-costsolder tips withquick connectionfeatures that allow

g the probeto varioussolder pointsfast and easy.

movin On the MSO70000 Series,the P6780 and P6717 logicprobes provide

ctivity to low-speedand high-speeddigital signalswith low loading,

conne smallsize, anda range ofaccessories for solderingand browsing.

www.tektronix.com 13

Data Sheet

Production Testing

In addition to assisting engineers with design tasks, the DPO/DSA/MSO70 to testanalog and digital signals with a wide range of clock speeds and data rates. Rackmount options are available for mounting the DPO/DSA/MSO70000 Series intoan EIAstandard 19 inch(487 mm)rack. AnIEEE 488.2standard GPIBinterfaceis standardon all models.

OpenChoice®A

The OpenChoice Software allows you to customize your test and measurement systemwith familiar analysis tools. The analysis and networking features of theOpenChoice softwareadd more ﬂexibility to Tektronix DPO/DSA/MSO70000 Series oscilloscopes: Using thefast embedded bus, waveform data can be moved directly fromacquisition to analysisapp conventional GPIBtransfers.

Implementation by Tektronixof industry-standard protocols, such as TekVISA™ interface and ActiveX controls,are included for using and enhancing Windows applicationsfor dataanalysis and documentation. IVI instrument drivers are includedto enableeasy communication with the oscillosco running on the instrument or anexternal PC. Or,use the Software Developer’s Kit (SDK)to help createcustom s oftwareto automatemultistep processes in waveformcollection andanalysis with VisualBASIC, C, C++, MATLAB,LabVIEW,LabWindows/CVI, and other com mon Application Development Environments. Integration ofthe oscilloscope with external PCs and non-

000 Series can providetest engineerswith theability

nalysis Tools

licationson theWindows desktopat much fasterspeeds than

pe using GPIB, RS-232, and LAN connections from programs

Windows hosts is also supported.

Research

With industry-leading acquisition speed and signal-to-noise ratio performance, theDPO/DSA/MSO70000 Seriescan provideresearchers with tools thatallow themto capture, display,andanalyze high-speedand transient sign

Full Control o

You have full controlof the instrument’s acquisitionmodes. Choose the mode you need t Rate, or Manualsettings. When youare doingsignal explorationand want a lively signal, the default Automatic modeprovides youwith theliveliest display updaterate. If youwant the highest real-time sample rate that will give youthe mostmeasurement accuracy, thenthe ConstantSample Rate mode isfor you. It will maintain the highestsample rateand provide the best real independent control of the samplerate andrecord lengthfor applications requiring speciﬁcsettings.

TekLink™

When youneed to captu re a large number of signalssimultaneously, TekLink allowsyou to synchronize multiple DPO/DSA/MSO70000 Series oscilloscopesand acquiremorethan fouranalogchannels. TekLinkenables synchronizedcapture onup to 4oscilloscopes with onetrigger event.

Document Tools

The OpenChoice architecture provides a comprehensive software infrastructure for faster,more versatile operations. Data transfer utilities, suchas theExcel or Wordtoolbar plug-inscanbe usedto simplify analysis anddocumen

als with unmatched precision.

f Acquisition and Display Parameters

o do your jobthe fastest: Automatic, ConstantSample

-time resolution. Finally the Manual mode ensuresdirect and

tation on theWindows desktoporon anexternal PC.

14 www.tektronix.com

Digital and Mixed Signal Oscilloscopes —DPO/DSA/MSO70000Series

This view in theﬂoatinglicensesystemidentiﬁes the license’scurrentuser and location allowingyouto easily manage your ﬂoating license inventory.

Unmatched Usability

The D PO/DSA/MSO70000 Seriesinstruments excelin usability with a suiteof productivityfeatures, suchas a touchscreen, ﬂatmenu structures, intuitive graphical icons, k nob-per-channel vertical controls, rightclicks, mousewheel operation,and familiarWindows-based controls.

Remote Desktop

When youroscilloscope is connected to anetwork, use theWindows Remote Desktop utilityto accessyour o across theglobe.

MyScope®– Create Your Own Control Windows

Easily create your own personalized "toolbox"of oscilloscopefeatures in a matter of minutes using asimple, visual, drag-and-drop process.

scilloscope from acrossthe labor

Once created, thesecustom controlwindows a re easilyaccessed through a dedicatedMyScope button a nd menu selection on the oscilloscope button/menu ba unlimited number of custom control windows, enabling each person who uses the oscilloscope in a shared environment to have their own unique control window. MyScope control windowswill beneﬁt all oscilloscope users,eliminating theramp-uptime thatmanyface whenreturningto thelab afternot usinganoscilloscope forawhile, andenables the poweruser to be farmore efﬁci than navigating throughmultiple menusto repeat similartasks.

r,just likeany other control window. You can make an

ent. Everythingyou needisfound inonecontrol windowrather

Option Asset Management: Floating or Fixed

Many Tektronixapplication solutionsand hardware options are enabled with an encrypted license keythat isentered throughthe oscilloscope’s Utilitiesme applied to a speciﬁc scopeserial numberand ispermanently enabled. A ﬁxed license cannotbe movedfrom one oscilloscopeto another.

The secondoption is a ﬂoating license. Floating licenses provide the capability to move a license-keyenabled optionfrom oneoscilloscope to another. This capability helps users with distributed teamsand several Tektronix DPO/DSA/MSO70000 or DPO7000Series oscilloscopes tobetter manage theirassets and deploy applications orother optionssuch as extended me

Managing and deploying ﬂoating licenses uses an easy online licensing management maintained onTektronixsecure servers and no infrastructure or your company IT department involvement is necessary. Simply utilize your myTek account to access, track, and deploy youroscilloscope ﬂoating-license enabledoptions.

nu. Younowhave twooptions. The ﬁrst optionis a ﬁxedlicense

moryto theoscilloscope where itis needed.

system. All ﬂoatinglicense management functionsare

www.tektronix.com 15

Data Sheet

Characteristics

Vertical System

Characteristic DPO70404B

Bandwidth

DSA70404B

MSO70404

4 GHz 6 GHz 8 GHz 12.5 GHz 16 GHz 20 GHz

DPO70604B DSA70604B

MSO70604

DPO70804B DSA70804B

MSO70804

DPO71254C DSA71254C MSO71254C

(User-selectable DSP enhance)

Hardware Analog

4 GHz 6 GHz 8 GHz 12.5 GHz 16 GHz (typical) 16 GHz (typical)

Bandwidth(–3dB) InputChannels Logic Channels

444444

16 16 16 16 16 16 (MSO70000 Series only)

Rise Time 10% to 90%

98 ps 65 ps 49 ps 32 ps 24.5 ps 18 ps

(Typical) Rise Time 20% to 80%

68 ps 45 ps 34 ps 22 ps 17 ps 14 ps

(Typical) VerticalNoise(% of full

scale) (Typical)*

width Limits

Band

0.28% 0.32% 0.35% 0.36% 0.42% 0.59% Dependingoninstrumentmodel:19GHz,18GHz,17GHz,16GHz,15GHz,14GHz,13GHz,12GHz,11GHz,10GHz,

9GHz,8GHz,7GHz,6GHz,5GHz,4GHz,3GHz,2GHz,1GHz,or500MHz

Channel-to-Channel Isolation (Any two

≥120:1 (for input frequency 0 to 10 GHz) ≥80:1 (for input frequency>10 GHz to 12 GHz)

≥50:1 (forinput frequency>12 GHz to 15 GHz) ≥25:1 (for input frequency >15 GHz)

channels at equal verticalscale settings)

DC Gain Accuracy ±2% (of reading) Delay between Any

≤10 ps for any two channelswith equal V/div and coupling settings

TwoChannels ( Typical) Effective Number of

5.5 bits*

Bits(Typical) InputCoupling DC (50 Ω), GND InputImpedance

50 Ω ±2%, 1 MΩ with TCA-1MEG adapter

InputSensitivity

18GHz and below 10 mV/div to 500 mV/div (100 mV to 5 V full scale) 20GHz and 19 GHz 20 to 500 mV/div (200 mV to 5 V full scale)

Max Input Voltage, 50 Ω

Offset Accuracy

<5.0 V

for ≥100mV/div; also determined by TekConnectaccessory 1.0 V

RMS

±(0.35% (offset value-position) + 1.5 mV + 1% of full scale)

10 mV/div –

99.5 mV/div 100 mV/div –

±(0.35% (offset value-position) + 7.5 mV + 1% of full scale)

500mV/div. OffsetRange 10 mV/div: ±450 mV

20 mV/div: ±400 mV 50 mV/div: ±250 mV

100 mV/div: ±2.0 V 200 mV/div: ±1.5 V 500 mV/div: ±0.0 V

PassbandFlatness(20,

±0.5 dB to 50% of nominal bandwidth at 25 °C 50, 100, 250 mV/div) (Typical)

PositionRange ±5 div VerticalResolution

*150 mV/div, bandwidth ﬁlter on.

50 mV/div,bandwidth ﬁlter on, max bandwidth up to 13 GHz, max sample rate.

8 bit (11 bit with averaging)

DPO71604C DSA71604C MSO71604C

for <100 mV/div

RMS

DPO72004C DSA72004C MSO72004C

16 www.tektronix.com

Digital and Mixed Signal Oscilloscopes —DPO/DSA/MSO70000Series

Logic Channels (MSO70000 Series only)

Characteristic MSO70404 MSO70604 MSO70804 MSO71254C MSO71604C MSO72004C

InputChannels TriggerClock/Qualiﬁer

Input Analog Bandwidth

With P6780logic probe

With P6717logic probe

InputImpedance

With P6780logic

20 kΩ to ground per side or 40 kΩ differential mode ± 2.0%, 0.5 pF

probe With P6717logic

20 kΩ ±1.0%,3pF

probe VerticalResolution 1 bit ThresholdLevels Threshold Accuracy

One per c

±75 mV + 3 ThresholdResolution 5 mV LogicThresholdRange

With P6780logic probe

With P6717logic probe

Minimum Voltage Swing

mumInputVoltage

Maxi

2.5 GHz 350 MHz

hannel, independently set

% of threshold setting

–2 to +4.5V

–1.5 to +4.0V

300 mV

p-p

nondestruct

±15 V

Horizontal Time Base System

acteristic

Char

Time Base Range Time Resolution (in

DPO7 DSA7

MSO7

0404B 0404B

0404

0604B

DPO7

0604B

DSA7

0604

MSO7

20 ps/div to 1000 s/div 10 ps/div to 1000 s/div

200 fs 100 fs

DPO7 DSA7

MSO7

0804B 0804B

0804

ET/IT mode) Channel-to-Channel

Range ±75 ns

Deskew Delta Time

1.48 ps 1.33 ps 1.24 ps 1.23 ps 1.15 ps 1.43 ps Measurement Accuracy RMSover <100 ns Duration; SingleShot;withSignal Rise Time = 1.2 × ScopeRiseTime*

Jitter Noise Floor

450 fs 450 fs 450 fs 300 fs 300 fs 400 fs (Typical) (With BW bandwidth enhance enabled)

TimeBase Accuracy ±1.5 ppm initial accuracy, aging <1 ppm per year TimeBase Delay Time

–5.0 ks to 1.0 ks

Range TriggerJitter(RMS) 1ps

*3100 mV/div, bandwidth ﬁlter ON, max sample rate.

(typical) with enhanced triggering OFF

RMS

<100 fs

with enhanced triggering O N

RMS

DPO7 DSA7 MSO7

1254C 1254C

1254C

DPO7 DSA7 MSO7

1604C 1604C 1604C

DPO7 DSA7 MSO7

2004C 2004C 2004C

www.tektronix.com 17

Data Sheet

Acquisition System

Characteristic DPO70404B

DSA70404B

MSO70404

Sample Rates

Real-time Mode 1,

DPO70604B DSA70604B

MSO70604

DPO70804B DSA70804B

MSO70804

DPO71254C DSA71254C MSO71254C

DPO71604C DSA71604C MSO71604C

100 GS/s

2 Channel (Max) Real-timeMode1,2,3,

25 GS/s 50 GS/s

or4 Channel (Max) ET/IT Mode (Max) 5 TS/s 10 TS/s

Maximum R

With Standard Conﬁguration

With Record Length

ecord Length per Channel

10M on a ll four channels (DPO70000 and MSO70000 Series)

31.25M on all four channels (DSA70000 Series only)

31.25M on all four channels (DPO70000 and MSO70000 Series)

Option2XL With Record Length

62.5M on all four channels

Option5XL With Record Length

125M on all four channels

Option10XL With Record Length

N/A 250M on all four channels

Option20XL

Maximum Duration at Highest Real-time Resolution

ingResolution

Tim

Duration with

Max

ndard Memory

Sta Max Duration with

0.4 msDPO70000 and MSO70000 Series

1.25 ms (DPO70000 and MSO70000 Series) 0.31 ms (DPO70000 and MSO70000 Series)

40 ps (25 GS/s) 10 ps (100 GS/s)

0.1 ms DPO70000 and MSO70000 Series

1.25 ms for DSA70000 Series

0.31 ms for DSA70000 Series

Option2XL Max Duration with

2.5 ms 0.63 ms

Option5XL Max Duration with

5.0 ms 1.3 ms

Option10XL Max Duration with

N/A

2.5 ms

Option20XL

DPO72004C DSA72004C MSO72004C

Logic Channels (MSO70000 Series only)

Characteristic MSO70404 MSO70604 MSO70804 MSO71254C MSO71604C MSO72004C

SampleRate–All Channels (Max)

TimingResolution 80 ps Displayed

Channel-to-Channel TimingUncertainty

Maximum Record

125M on all channels (Option 10XL) 250M on all channels (Option 20XL)

LengthperChannel Minimum Detectable

Pulse Width Maximum Number of

Buses Number of Channels

Up to 24 (16 logic, 4 analog, 4 math)

per Bus

12.5 GS/s

<160 ps

<400 ps

18 www.tektronix.com

Digital and Mixed Signal Oscilloscopes —DPO/DSA/MSO70000Series

Acquisition Modes

Mode Description

Averaging Envelope FastAcq MaximumFastAcqWaveformCaptureRate >300,000wfms/s on all4 channels simultaneously FastFrame™

Hi-Res Real-timeboxcar averaging reduces randomnoise and increases resolution Peak Detect Roll Mode

Sample WaveformDatabase Accumulateswaveformdatabaseproviding three-dimensionalarray of amplitude, time, and counts

From2to10,000waveformsincludedinaverage

From 1 to 2×10 FastAcq optimizes theinstrument for analysis ofdynamic signals andcapture of infrequentevents

Acquisitionmemory divided into segments;maximumtrigger rate >310,000 waveformspersecond. Timeof arrival recordedwith each event. Frame ﬁndertoolhelpsto visually identify transients

Capturesanddisplaysnarrowglitchesat all real-time sampling rates: 1ns at ≤125 MS/s;1/samplerate at ≥250MS/s Scrolls sequential waveform pointsacrossthe display inaright-to-left rolling motion. Works at sample rates upto

10 MS/s with a maximum record length of 40MS Acquires and displays sampledvalues

waveforms included in min-maxenvelope

www.tektronix.com 19

Data Sheet

Pinpoint®Trigg er System

Sensitivity DPO and MSO Models DSA Models

Internal DC Coupled 4% of full scale from DC to 50 MHz

External (Auxiliary Input) 50Ω 250 mV from DC to 50 MHz, increasing to 350 mV at 1.0 GHz

Trigger Characteristics

AEvent and Delayed BEvent Trigger Types

Edge, Glitch, Runt, Width, TransitionTime, Timeout, Pattern,State, Setup/Hold, Window – allexcept

Edge, Pattern, and State can be Logic State qualiﬁedby up to two channels Main Trigger Modes TriggerSequences Main,Delayed by Time, Delayedby Events,Resetby Time, Reset byState,Reset by Transition. All sequences

can include separate horizontaldelay afterthetriggerevent to positiontheacquisitionwindow in time Clock Recovery System Requires Option ST6G or OptionMTH Standard ClockRecoveryPhase Locked Loop Bandwidth Fixed at FBaud/1600 ClockRecovery Frequency Range 1.5 MBaud to 3.125 GBaud 8b10b Max Baud Rate

Requires Option ST6G Standard

Requires Option MTH StandardCommunications-relatedTriggers

Support for AMI,HDB3, BnZS, CMI, MLT3, and NRZ encodedcommunications signals. Selectamong isolated

positive or negative one, zero pulse form, or eye patterns asapplicable to the standard

Serial Pattern Trigger

Requires Option ST6G Standard

Up to64 bit serial word recognizer, bits speciﬁed in binary (high, low, don’t care) or hex format.

Trigger on NRZ-encoded data up to 1.25 GBaud

Trigger on 8b/10b-encoded data from 1.25 to 6.25 GBaud (40 bits)

Threshold Range

P6780 –2 to +4.5 V

P6717 –1.5 to +4 V Threshold Accuracy MaximumI2C, SPI Bus ToggleRate Clock Recovery Jitter(RMS) <0.25% bit period + 2 ps

<0.25% bit period + 1.5 ps

Enhanced Triggering

User-selectable; enhanced triggering corrects the difference in timing between the trigger

path and the acquired data path (supportsall Pinpoint trigger types on both A- and B-Events

except pattern trigger); Not available in FastAcq mode

Line

Trigger on power line signal. Level ﬁxed at 0 V

MinimumSignalAmplitudeneededfor Clock Recovery 1 div Tracking/AcquisitionRange ±2% of requested baud

TriggerCoupling DC, AC (attenuates <100 Hz)

TriggerHoldoffRange TriggerLevelRange Internal

10% of full scale at 4 GHz 20% of full scale at 8 GHz

50% of full scale at 11 GHz

Auto, Normal, and Single

6.25 GBaud

±100 mV + 3% of threshold setting

10 MHz

for PRBS data patterns

RMS

for repeating"0011” data pattern

RMS

up to 1.25 Gbaud

p-p

1.5 div

above 1.25 Gbaud

p-p

HF Rej (attenuates >20 kHz)

LF Rej (attenuates <200 kHz)

Noise Reject (reduces sensitivity)

250 ns min to 12 s max

±120% of full scale from center of screen

20 www.tektronix.com

Trigger Modes

Mode Analog

Comm Bus X X

Edge X X B Event Scan

Glitch Pattern X X

Runt X SerialPattern Setup/Hold

State Timeout X X

Transition X TriggerDelay by

Events TriggerDelay by

Time Width X X

Window X

Channels

X X

X X 1 to 2 billion events X X 3.2 ns to 3 million seconds

MSO Logic

Channels

Digital and Mixed Signal Oscilloscopes —DPO/DSA/MSO70000Series

Description

Standardfeatureon the DSA70000 Series, providedas partof OptionMTH ontheDPO70000and MSO70000

Triggerona parallel, I

B Event Scanis an A to Btrigger sequence thatwill trigger and capture burst eventdata of interestas deﬁned in theB Event Scansetup menu. Captured bits can bescanned in a sequential or randomized

fashion, and alternatively thetrigger can toggle betweentwo successive Btrigger events. Eye diagrams

TriggeronNRZ-encodeddata up to 6.25Gbaud; above1.25Gbaudrequires 8b/10b encoded data. Extended

withpattern lock triggering to capturerepeatedacquisitionsof long serial testpatternsupto 6.25 Gb/s

Triggeronviolationsofbothsetuptime and hold time between clock anddata present on anytwo inputchannels

Any logical patternof channels(1, 2,3) (and16 logic channels on the MSO70000 Series)clocked

Triggeronan event which remains high,low, or either, for a speciﬁedtime period. Selectable from300 ps

Triggeron pulseedge rates thatare faster or slowerthan speciﬁed. Slope may be positive,negative, or either

Triggeronwidth of positive or negativepulse eitherwithinor out of selectable timelimits (downto 150ps)

Series. Support for AMI,HDB3, BnZS,CMI, MLT3, and NRZ encoded signals

Positive or negative slope on any channel or front-panel auxiliary input. Coupling includes

can be constructed with burstdata acquiredas a result of scanning B Event

Trigger on or reject glitches of positive, negative, or either polarity. Minimum glitch width

Trigger when pattern goes false or stays true for speciﬁedperiod of time. Pattern (AND, OR,

NAND, NOR) speciﬁed for four input channels (and 16 logic channels on the MSO70000

Trigger on a pulse that crosses one threshold but fails to cross a second threshold before

Trigger on an event that enters or exits a window deﬁned by two user-adjustablethresholds.

C, or SPI buswhenthe speciﬁc bus value isfound. (MSO70000 Seriesonly)

DC, AC, noise reject, HF reject, and LF reject

is 150 ps (typical) with rearm time of 300 ps

Series) deﬁned as high, low, or don’t care

crossing the ﬁrst again. Event can be time- or logic-qualiﬁed

by edge on channel 4. Trigger on rising or falling clock edge

Event can be time or logic qualiﬁed

Search and Mark Events

Markany events anddocument waveforms. Searchpositive/negativeslopesor both on anychannels.

Search glitches or runts,aswell as transitionrate, pulsewidth, setup and hold, timeout, window violations, orﬁnd any logicor statepatternon any numberof channels. SearchDDRRead or Write bursts withOption DDRA.

Event table summarizes all found events. Alleventsare time stamped in reference totriggerposition. Userscan chooseto stop acquisitionswhen an event isfound.

Waveform Analysis

Waveform Measurements

Measurement Description

Automatic Measurements

AmplitudeRelated Amplitude, High, Low, Maximum, Minimum,

Combination Area,Cycle Area, Phase, BurstWidth Eye-pattern Related

Histogram Related

TimeRelated RiseTime,Fall Time, Positive Width,NegativeWidth,

53, of which8 canbe displayed on-screenat anyone time; measurement statistics, user-deﬁnable reference levels, measurement within gates isolatingthe speciﬁc occurrencewithin an acquisition to measure

Peak-to-Peak,Mean, Cycle Mean,RMS, Cycle RMS, Positive Overshoot, Negative Overshoot

Extinction Ratio (absolute, %, dB), Eye Height, Eye Width,Eye Top,Eye Base,Crossing%, Jitter (p-p, RMS, 6sigma), Noise (p-p, RMS),Signal/NoiseRatio, Cycle Distortion,Q-Factor

WaveformCount, Hitsin Box, Peak Hits, Median, Maximum,Minimum,Peak-to-Peak,Mean (μ), Standard Deviation(sigma),μ+1sigma,μ+2sigma,μ+3sigma

Positive Duty Cycle, Negative DutyCycle, Period, Frequency,Delay

www.tektronix.com 21

Data Sheet

Bus Decoding (MSO70000 Series only)

Characteristic

Parallel

Description

Data from selected channelsis grouped as aparallel, multichannelbus and displayedas asingle bus value. Display can be binary, hexadecimal, orsymbolic formats

C SCLKand SDA channels are displayedas abus perthe

Inter-IntegratedCircuitspeciﬁcation

SPI MOSI,MISO,SCLK,and SS channels are displayed as a

bus per the SerialPeripheral Interfacespeciﬁcation

Waveform Processing/Math

Measurement Description

AlgebraicExpressions

Deﬁne extensive algebraicexpressions including Waveforms,Scalars, User-adjustable Variables, and Resultsof Parametric Measurements

e.g. (Integral(CH1 – Mean(CH1))× 1.414 ×VAR1) Arithmetic FilteringFunctions

Add, Subtract, Multiply,Divide WaveformsandScalars

User-deﬁnable ﬁlters. Usersspecify a ﬁle containingthe

coefﬁcientsof the ﬁlter. Several example ﬁlterﬁles are

provided Frequency Domain

Functions Mask Function

Spectral Magnitude and Phase,Real and Imaginary

Spectra

GeneratesaWaveformDatabasepixmapfroma sample

waveform. Samplecountcan be deﬁned

Functions

Math

Average,Invert, Integrate, Differentiate, Square Root,

Exponential, Log 10, Log e, Abs,Ceiling, Floor, Min,

Max,Sin, Cos, Tan,ASin, ACos,ATan,Sinh, Cosh, Tanh Relational

Booleanresultof comparison >, <, ≥,≤,==, != VerticalUnits Magnitude: Linear, dB, dBm

Phase: Degrees, radians, group delay

IRE and mVunits Window Functions Rectangular, Hamming, Hanning, Kaiser-Bessel,

Blackman-Harris,Gaussian,Flattop2,Tek Exponential

Display, Computer, I/O

Computer System and Peripherals

Characteristic DPO/DSA70 000B

Models

DPO/DSA/MSO70000C

Models

OperatingSystem Microsoft Windows XP Embedded CPU

PC System Mem

ory

Intel Pentium 4 Processor,

3.4 GHz 2GB 8GB

Intel Core 2 Duo

Processor, 3 GHz

HardDisk Drive Rear-panel, removable hard disk drive,

160 GB capacity CD/DVD Drive Front-panel CD-R/W, DVD-R drive Mouse Keyboard

Optical wheel mouse, USB interface

USB interface

Input/Output Ports

Front Panel

Port

gerInput

Aux Trig DC Probe Calibration

Output FastEdge Output SMA connector providesfast edge signal. 1 kHz

Recovered Clock SMA connector, ≤1.25 Gb/s,Output swing ≥130mV

vered Data

Reco

USB 2.0 Port Allows connectionof USB keyboard, mouse,

DPO/DSA70000B

Models

DPO/DSA/MSO70000C

Models

See trigger speciﬁcations

BNC connector,±10 V DCfor DC probecalibration

(signal available only duringprobe calibration)

±20%; 810mV (base to top) ±20%into ≥10 kΩ

load; 440 mV ±20% into a 50Ω load

into 50 Ω at 1.25Gb/s. Requires Option ST6Gor

OptionMTH to enable on DPO70000and MSO70000

Series, standard onDSA70000 Series

SMA connector, ≤1.25 Gb/s, Output swing of

1010 repeatingpattern 200 mV into 50 Ω at

1.25 Gb/s. RequiresOption ST6G orOption MTH to enable onDPO70000 and MSO70000 Series,

standard on DSA70000 Series

or storage device

p-p

Display

Characteristic

Description

Color Palettes Normal, Green, Gray, Temperature,Spectral, and

User-deﬁned

DisplayFormat YT,XY Display Resolution

XGA 1024 horizontal × 768vertical pixels Display Size Diagonal: 307.3 mm (12.1in.) Display Type Liquid-crystalactive-matrix colordisplay Horizontal Divisions 10 VerticalDivisions 10 WaveformStyles Vectors,Dots, Variable Persistance, Inﬁnite Persistance

22 www.tektronix.com

Digital and Mixed Signal Oscilloscopes —DPO/DSA/MSO70000Series

Rear Panel

Port

Audio Ports

DPO/DSA70000B

Models

DPO/DSA/MSO70000C

Models

Miniature phone jacks for stereo microphone

input and stereo line output

AuxTriggerOutput BNC connector, 0 to 3 V; default output is

A-Event Trigger low true

External Time Base Reference In

BNC connector; allows time basesystem to phase lock to external10/100MHz reference. Optimized

(by using a softwareswitch) for either a highly

stable clock or tracking mode GPIB Port KeyboardPort LAN Port

RJ-45 connector,supports 10BASE-T, 100BASE-T,

IEEE 488.2 standard

PS/2 compatible

and 1000BASE-T

Mouse Port

PS/2 compatible ParallelPort IEEE 1284, DB-25 connector eSATA port N/A External SATA interface

foreSATA storagedevices

Power External Video Ports

100 to 240V

<870 W, 400 Hz; CAT II, <1100 VA typical

Connect to showthe oscilloscope display, including

,±10%,50/60Hz;115V

RMS

±10%,

live waveforms on anexternal monitor orprojector.

The primary Windows desktop canalsobe displayed

on an external monitor using these ports

Scope XGA VideoPort

15-pin D-sub connector

N/A

on the rearpanel, video is

IBM XGA compatible

DVI-I Video Port

N/A DVI connector,female.

DVI to VGA 15-pin

D-sub connector adapter

provided Serial Port DB-9COM1 port TwoDB-9COM1 ports TekLink™

Synchronizes multiple Tektronixoscilloscopes

together to allow simultaneousacquisition of

more than four channels

TimeBaseReferenceOut BNC connector; provides TTL-compatible output

of internal 10 MHz referenceoscillator

USB 2.0 Ports Four. Allow connection of USB keyboard,

mouse, or storage device

WindowsVideoPort 15-pinD-sub connectoron

the rear panel;connects a second monitorto use

dual-monitor display

mode allowing analysis

results and plots to be

Alternatively, the DVI-I port can be conﬁgured to show the secondary Windows desktop (also

called extended desktop

or dual-monitor display)

viewed alongwith the

oscilloscope display.

VideoisDDC2Bcompliant

Physical Characteristics

Dimensions

Benchtop Conﬁguration

Dimension

Height 298 11.74 Width 451 17.75 Depth 489.97 19.29

Weight kg lb.

Net 24 53 Shipping

Rackmount Conﬁguration

Dimension mm in.

Height 311 12.25 Width 480.1 18.9 Depth(fromrackmounting

eartoback of instrument)

Weight kg lb.

Net 22 59 Kit 2.7 6

Mechanical

Cooling – Required Clearance

Top 0 0 Bottom 0 0 Left Side RightSide Front 0 0 Rear 0 0

Environmental

Characteristic

Description

Temperature

Operating 5 °Cto +45 °C Nonoperating

–20°Cto+60°C

Humidity

Operating 8% to 80% relative humidity(RH) at upto 32°C

Above+32 °C up to+45 °C;aslimitedby a 29.4 °Cwet bulb temperature

Nonoperating

5% to 95% relativehumidity(RH) Above+32 °C up to+60 °C;aslimitedby a 29.4 °Cwet bulb temperature

Altitude

Operating 3,000 m (9,843 ft.) Nonoperating

12,000 m (39,370 ft.)

Regulatory

Electromagnetic

2004/108/EC;EN61326-2-1:2006

Compatibility Certiﬁcations UL 61010-1, CSA 61010-1-04, LVD 2006/95/EC,

EN61010-1,IEC 61010-1

in.

34 67

546.1 21.5

in.

76 3 76 3

www.tektronix.com 23

Data Sheet

Ordering Information

Models

Model Description

MSO70404 4 GHz Mixed SignalOscilloscope MSO70604 6 GHz Mixed SignalOscilloscope MSO70804 8 GHz Mixed SignalOscilloscope MSO71254C 12.5 GHz MixedSignal Oscilloscope MSO71604C 16 GHz MixedSignalOscilloscope MSO72004C 20 GHz MixedSignalOscilloscope DPO70404B 4 GHzDigital Phosphor Oscilloscope DPO70604B 6 GHzDigital Phosphor Oscilloscope DPO70804B 8 GHzDigital Phosphor Oscilloscope DPO71254C 12.5 GHz DigitalPhosphor Oscilloscope DPO71604C 16 GHz DigitalPhosphor Oscilloscope DPO72004C 20 GHz DigitalPhosphor Oscilloscope DSA70404B 4GHz Digital Serial Analyzer DSA70604B 6GHz Digital Serial Analyzer DSA70804B 8GHz Digital Serial Analyzer DSA71254C 12.5 GHzDigital SerialAnalyzer DSA71604C 16 GHzDigitalSerial Analyzer DSA72004C 20 GHzDigitalSerial Analyzer

All Models Include : Accessory pouch,frontcover,mouse, keyboard, quick start user manual (071-173x-xx), (4) TekConnect and (1) TekConnect-to-BNCadapter(TCA-BNC), DPO/DSA/MSO70000 Series productsoftware CD/DVD-ROM, performance veriﬁcation procedure PDF ﬁle,GPIB programmer’sreference(onproduct software CD/DVD-ROM), calibrationcertiﬁcate documenting NIST traceability, Z540-1 compliance andISO9001, power cord, one-year warranty.

Note: Please specify quick-startuser manuallanguage and powerplug when ordering.

to 2.92 mm adapters(TCA-292MM)

24 www.tektronix.com

Digital and Mixed Signal Oscilloscopes —DPO/DSA/MSO70000Series

Options

Instrument Options

Option D PO700 00 DSA70000 MSO70000

Record Length Options

Opt. 2XL Opt. 5XL Opt. 10XL Opt. 20XL*

MSO70000 Digital Signal Analyzer Options

Standard XXX XXX XXX

Opt. DSAH X, for MSO70404,

Opt. DSAU X, for MSO71254C,

Trigger and Search Options

Opt. LT Opt. MTH

Opt. ST6G

Advanced Analysis Options

Opt. D-PHY* Opt. DDRA*

Opt. DJA Opt. DSPT*

11, 12

Opt. DVI Opt. ERRDT*

Opt. ET3* Opt. FBD*

Opt. HT3 Opt. HT3DS Opt. IBA* Opt. PCE* Opt. PWR*

Opt. RTE Opt. SLA Opt. SLE Opt. SST*

Opt. SVE Opt. SVM* Opt. SVP* Opt. SVT* Opt. USB* Opt. USB3*

9, 11

Opt. UWB

XXX X

Standard

XXX X X X DDR Memory Bus Analysis

Standard XXX XXX XXX

XXX X X X FB-DIMM Memory Bus Analysis XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX XXX

MSO70604, or

MSO70804

MSO71604C, or

MSO72004C

X X

Description

31.25 MS/Ch

62.5 MS/Ch 125 MS/Ch 250 MS/Ch

MSO Digital Serial Analysis Bundle, includes Opt.

2XL, DJA, MTH, and ST6G

MSO Digital Serial Analysis Bundle, includes Opt.

2XL, DJA, MTH, and ST6G

Waveform Limit Testing

Mask testingfor Serial Standards. Includes hardware

clock recoveryfor up to 3.125 Gb/s

Protocol Triggering and Decoding for 8b/10b-encoded

Serial Signals up to 6.25 Gb/s. Includes hardware clock

recovery and pattern lock triggering

D-PHY Essentials – Characterization and

MIPI

Compliance Test Solution

DPOJET Jitter and Eye Diagram Analysis

DisplayPort Compliance Test Solution

DVI Compliance Test Solution

Frame and Bit Error Rate Detector for High-speed Serial

Standards(Availablethroughtheprogrammableinterfaceonly)

Ethernet Compliance Test Software

HDMI Compliance Test Software

HDMI DirectSynthesis for HDMI 1.4

InﬁniBandComplianceModule for RT-Eye Analysis Software

PCI Express™ Analysis Software

Power Measurement and Analysis Software RT-EyeSerial DataComplianceand Analysis Software Serial Data Link Analysis Advanced(with Equalization)

Serial Data Link AnalysisEssentials(no Equalization)

SATA and SAS Analysis Software

SignalVu™Essentials– VectorSignal Analysis Software

General Purpose Modulation Analysis

AdvancedSignal Analysis (including pulse measurements)

Frequency and PhaseSettlingTime Measurements

USB 2.0 Compliance Test Software

USB 3.0 Compliance and Analysis Software

Ultra-Wideband Spectral Analysis (includes WiMedia

Alliance PHY interface testing)

www.tektronix.com 25

Data Sheet

Option D PO700 00 DSA70000 MSO70000

Floating Optio

n Licenses

Description

FloatingLicenses offer an alternativemethodto manage your Tektronixasset. Floating licenses allowlicense-keyenabled options to beeasilymoved among allyour DPO/DSA/MSO70000andDPO7000 Series oscilloscopes. Floating licenses are available forthe followinglicense-key enabled options.

Check www.tek.com/products/oscilloscopes/ﬂoatinglicensesfor additional information about ﬂoating licenseoptions. DPOFL-ASM DPOFL-CP2 DPOFL-D-PHY*

XXX XXX XXX

ANSI/ITU TelecomPulse Compliance Test Software

MIPI

Advanced EventSearch and Mark

D-PHY Transmitter Debug, Characterization,

and Compliance Test Solution DPOFL-DDRA* DPOFL-DJA DPOFL-DSA DPOFL-DSPT* DPOFL-DVI DPOFL-ERRDT*

11, 12

X X X DDR Memory Bus Analysis X

Standard XX XXX XXX XXX

Jitter and EyeAnalysisTools– Advanced(DPOJET)

Digital Serial Analysis Bundle

DisplayPort Transmitter Compliance Test Software

DVI Compliance Testing

Frame and Bit Error Rate Detector for High-speed

Serial Standards

DPOFL-ET3* DPOFL-FBD* DPOFL-HT3 DPOFL-HT3DS DPOFL-IBA*

DPOFL-J2 DPOFL-JA3 DPOFL-JE3 DPOFL-LT DPOFL-MTH DPOFL-PCE* DPOFL-PTD DPOFL-PWR* DPOFL-RTE DPOFL-SLA DPOFL-SLE DPOFL-SST* DPOFL-ST6G DPOFL-STU

XXX

Ethernet Compliance Testing X X X FB-DIMM Memory Bus Analysis XXX XXX XXX XXX

HDMI Compliance Testing

HDMI DirectSynthesis for HDMI 1.4

Inﬁniband Compliance Module

Disk Drive Measurements Software X X X Jitterand Timing Measurements– JIT3 Advanced XXX XXX X

Standard

Mask Testing, includes Hardware Clock Recovery XXX X

Standard

Protocol Trigger and Decode for 8b/10b

TDSJIT3 Essentials

Waveform Limit Testing

PCI Express Measurements

X X X Power Measurementand Analysis XXX XXX XXX XXX X

Standard

Real-timeEye–SerialDataComplianceandAnalysis

Serial Data LinkAnalysis– Advanced (includesEqualization)

Serial Data Link Analysis– Essentials (no Equalization)

SAS and Serial ATACompliance Module

8b/10bSerial Protocol Trigger and Decode upto6.25 Gb/s

Upgrade from 3.125 Gb/s to 6.25 Gb/s 8b/10b Serial

Protocol Trigger and Decode DPOFL-SVT* DPOFL-USB* DPOFL-USB3* DPOFL-UWB DPOFL-XL02 DPOFL-XL05 DPOFL-XL010 DPOFL-XL020*

10 5

9, 11

XXX XXX XXX

Settling Time Measurements – Frequency and Phase

USB 2.0 Compliance Testing

USB 3.0 Essentials X X X Ultra Wideband Analysis X

Standard XXX XXX XXX

Extended record length– 31.25M Samples/Ch

Extended record length – 62.5MSamples/Ch

Extended record length– 125MSamples/Ch Extended record length– 250MSamples/Ch

26 www.tektronix.com

Digital and Mixed Signal Oscilloscopes —DPO/DSA/MSO70000Series

Option D PO700 00 DSA70000 MSO70000

TekExpress Ap p

lication Framework

Description

TEKEXP X X X TekExpress Au Opt. HEAC Opt. SATA-TSG Opt. SATA-RSG Opt. SATA-RXTX Opt. SATA-DHB

XXX XXX XXX

SATA PHY/TSG/OOB Transmitter TestsforTekExpress

SATA RSG/RMT Receiver Tests for TekExpress XXX XXX

SATA TekExpress SW Bundle (TSG, RSG, RXTX

HEAC Automated Solution

SATA Rx/Tx Channel Testsfor TekExpress

for Hosts or Devices) Opt. SATA-SI Opt. USB-RMT Opt. USB-TX*

9, 11

Opt. XGbT

*4Requires Ethernet TestFixture.

s TDSUSBF (USB TestFixture).

Require

At least Opt. 2XLand a TCA-1MEG TekConnect 1 MΩ bufferampliﬁer arerecommended for use.

RequiresOpt. RTE.

ls of bandwidth ≥12.5 GHz only.

For mode

Requires DJA.

Requires Opt. SVE, SVEH, or SVEU.

dels of bandwidth ≥8GHzonly.

For mo

RequiresOpt. DJA and 5XL.

Requires Opt. ST6G.

User Manu

Option

Opt. L0 Opt. L1

al Options

Description

English manual

French manual Opt. L3 German manual Opt. L5

Japanesemanual Opt. L7 Simple Chinese manual Opt. L8 Standard Chinese manual Opt. L9 Opt. L10 Opt. L99

Korean manual

Russian manual

No manual

XXX XXX

TekExpress AutomatedUSB 3.0 Receiver Solution XXX XXX

Service O

ptions

Option Description

Opt. CA1 Singlecalibrationor functional veriﬁcation Opt. C3 CalibrationService3Years Opt. C5 CalibrationService5Years Opt. D1 CalibrationData Report Opt. D3 CalibrationData Report 3 Years(with Opt. C3) Opt. D5 CalibrationData Report 5 Years(with Opt. C5) Opt. G3 Complete Care 3 Years (includes loaner,scheduled

calibration and more)

SATA SI Cable Tests for TekExpress

TekExpress Automated USB 3.0 Solution

10GBASE-T Automated Solution

Opt. G5 Complete Care 5 Years (includes loaner,scheduled

Power Plug Options

Option

Description

Opt. A0 USplug,115V,60 Hz Opt. A1 Opt. A2 Opt. A3

Euro plug, 220 V, 50 Hz UK plug, 240V, 50 Hz Australianplug, 240 V, 50 Hz

Opt. R3 Repair Service 3Years Opt. R5 Repair Service 5Years Opt. IN Product Installation Service Opt. IF UpgradeInstallationService

calibration and more)

Opt. A5 Swissplug, 220 V, 50 Hz Opt. A6 Japaneseplug, 100V,110/120V,60 Hz Opt. A10 China plug, 50 Hz Opt. A11 Opt. A12 Opt. A99

India plug, 50Hz Brazilian plug, 60Hz No power cord

tomation Framework

www.tektronix.com 27

Data Sheet

Recommended Accessories

Probes

Probe Descrip tion

P7520 P7516 P7513A P7313SMA 13GHzTekConnect®differential SMA probe P7508 P7380SMA 8GHz TekConnect®differential SMA probe P7506 P7504 P6780 P6717 P6251

P6250 TCPA300/TCPA400

Series P5200/P5205/P5210 High-voltagedifferentialprobes

067-0484-xx 067-1586-xx 067-1686-xx Power DeskewFixture

Adapters

Adapter Description

TCA-1MEG TekConnecthigh-impedance buffer ampliﬁer. Includes TCA-292MM TekConnectto 2.92 mm connectors

TCA-BNC TekConnect-to-BNCadapter TCA-N TekConnect-to-N adapter TCA-SMA TekConnect-to-SMAadapter TCA75 8 GHzprecisionTekConnect 75 Ω to50Ω adapter with

20 GHz TriMode™ probe 16 GHz TriMode™ probe 13 GHz TriMode™ probe

8 GHz TriMode™ probe

6 GHz TriMode™ probe 4 GHz TriMode™ probe DifferentialInputLogic probe General-purposeLogicprobe DCto 1 GHz, 42V,differentialprobe(requiresTCA-BNC

adapter) DC to 500 MHz, 42 V, differential probe(requires

TCA-BNC adapter) Currentmeasurement systems

AnalogProbeCalibrationandDeskew Fixture (4 GHz) AnalogProbe Deskew Fixture (>4 GHz)

P6139A passive probe

75 Ω BNCinputconnector

Cables

Cable Order Number

CentronicsCable GPIBCable (1 m) GPIBCable (2 m)

P6780 Logic Pr

Accessory

D-MAXProbe Footprint to Square Pin Header Adapter

MICTORto Square Pin HeaderAdapter

Deskew Fixture Logic Probes

StandardAdapter WideBody Adapter 020-3036-xx 25°/55° Holder HeatStripWire(4.57m) HandBrowsingAdapter 202-3031-xx FlexAdapter 020-3033-xx Lead Set Ground Probe Grouper

(includingheaderpins) FerriteBeads 020-3034-xx WireTubing(4.57m)

012-1214-xx 012-0991-xx 012-0991-xx

obe Standard Accessories

Order Number

NEX-P6960PIN

NEX-HD2HEADER 067-2083-xx 020-3035-xx

020-3032-00 020-3021-00

020-3038-xx 020-3042-xx

020-3037-xx

P6717 Logic Probe Standard Accessories

Accessory

D-MAXProbe Footprint to Square Pin Header Adapter

MICTORto Square Pin HeaderAdapter

Deskew Fixture Logic Probes

ExtensionGround Tip Probe Tip 131-5638-xx IC Grabber ProbeGrouper Lead Sets GroundLead Sets

Order Number

NEX-P6960PIN

NEX-HD2HEADER 067-2083-xx 206-0559-xx

206-0569-xx 352-1115-xx 196-3501-xx 196-3497-xx

28 www.tektronix.com

Digital and Mixed Signal Oscilloscopes —DPO/DSA/MSO70000Series

Accessories

Accessory

Memory Testing

DDR3×4/×8 Solder Chip Interposer NEX-DDR3MP78BSC DDR3×4/×8 Socket Chip Interposer NEX-DDR3MP78BSCSK DDR3×16 Solder Chip Interposer NEX-DDR3MP96BSC DDR3×16 Socket Chip Interposer NEX-DDR3MP96BSCSK DDR2×4/×8 Solder Chip Interposer NEX-DDR2MP60BSC DDR2×4/×8 Socket Chip Interposer NEX-DDR2MP60BSCSK DDR2×16 Solder Chip Interposer NEX-DDR2MP84BSC DDR2×16 Socket Chip Interposer NEX-DDR2MP84BSCSK InstrumentedDIMMfor DDR3 Order Scope NEXVu card for

System Test

TestFixtureforUsewithOpt. USB TDSUSBF 10GBASE-T Fixture for Use with Option

XGbT Software EthernetTestFixture

Crescent Heart Software;Serial ATA ZP test ﬁxture setforHost,Device, and Cable testing

Crescent Heart Software; ESerial ATA ZP test ﬁxture setforHost,Device, and Cable testing

HEACTPA-KITconsists of: Main Board; Plug A-type board; PlugC-typeboard; 2 × TDRboardwith A Receptacle;2 × TDR board with C Receptacle

HDMITypeCFixture Set for Rx/Tx TF-HDMI-TPA-S/STX KEITHLEY INSTRUMENTS INC;

RF/Microwave switch system, 32 channel,unterminated,Americas power cord

Order Number

UDIMM Raw Card E. (Contact http://www.nexustechnology.com)

TF-XGbT Orderthrough Crescent Heart Software

(http://www.c-h-s.com) TF-SATA-SET-IV-ZP

TF-ESATA-SET-IV-ZP

TF-HEAC-TPA-KIT

S46-6666-A-AMER

Accessory

KEITHLEY INSTRUMENTSINC; RF/Microwave switch system, 32 channel, unterminated, Asia-Paciﬁc power cord

KEITHLEY INSTRUMENTSINC; RF/Microwave switch system, 32 channel, unterminated, Europe/Africa power cords

USB3.0 A/B Fixture/Cable Kit TF-USB3-AB-KIT USB 3.0 A PlugFixture TF-USB3-A-P USB3.0 A ReceptacleFixture Kit TF-USB3-A-R USB3.0 B ReceptacleFixture Kit TF-USB3-B-R 1000/100/10BASE-TAdvanced Test

Package (consists oftest ﬁxturePCB set, RJ45 interconnect cable, and 1000BASE-T jitter testchannel cable)

1000/100/10BASE-T Basic Test Package(consists of test ﬁxture PCBset andRJ45 interconnect cable)

103 meter1000BASE-T jitter test channel cable

Short (4 inch (0.1 meter)) RJ45 interconnect cable

Test ﬁxturesthat complement the use of the TekEXP-XGbTsolution

Other

Oscilloscope Cart Rackmount Kit 016-1985-xx ServiceManual SpareHDD for DPO/DSA/MSO70000

Series TransitCase

Order Number

S46-6666-A-ASIAP

S46-6666-A-EURAF

TF-GBE-ATP

TF-GBE-BTP

TF-GBE-JTC TF-GBE-SIC TF-XGbT

K4000

071-1740-xx 065-0834-xx

6-1977-xx

www.tektronix.com 29

Data Sheet

Upgrade Options

TheDPO/DSA/MSO70000Series instruments can be easilyupgraded afterinitial time of purchase.

To upgrade anexistingDPO/DSA/MSO70000, order DPO-UP andoptionlisted below. Forexample, DPO-UP DDRA.

Option

Description

Memory

Upgraderecordlength on a DPO70000 orMSO70000 Seriesfrom: XL02 XL05 XL010 XL020*

StandardConﬁguration to Option 2XL Conﬁguration StandardConﬁguration to Option 5XL Conﬁguration StandardConﬁgurationtoOption10XLConﬁguration

StandardConﬁgurationtoOption20XLConﬁguration Upgraderecordlengthona DPO70000, DSA70000, or MSO70000 Series from: XL25 XL210 XL220* XL510 XL520* XL1020*

Option 2XL Conﬁgurationto Option 5XLConﬁguration

Option2XLConﬁgurationtoOption10XLConﬁguration

Option2XLConﬁgurationtoOption20XLConﬁguration

Opt. 5XLConﬁguration toOpt. 10XLConﬁguration

Opt. 5XLConﬁguration toOpt. 20XLConﬁguration

Opt. 10XLConﬁguration toOpt. 20XLConﬁguration

Trigger and Search

UpgradeDPO70000,DSA70000, or MSO70000 Series with: ASM AdvancedEvent Search and Mark LT MTH

WaveformLimit Testing

Mask testing for Serial Standardswith HardwareClock

Recovery ST6G Protocol Triggeringand Decoding for 8b/10b-encoded

SerialSignals (Up to 6.25Gb/s) STU Increase Protocol Triggering and Decoding from

3.125 Gb/s to 6.25Gb/s

Advanced Analysis

UpgradeDPO70000,DSA70000, or MSO70000 Series with:

CP2* D-PHY DDRA* DJAH

ANSI/ITUTelecom Pulse Compliance TestingSoftware

D-PHYCompliance TestSolution

MIPI

Upgrade to Option DDRA

DPOJET Jitter and EyeDiagramAnalysis

(Upgradefor DPO70404 - DPO70804orMSO70404 -

MSO70804 models) DJAU

DPOJET Jitter and EyeDiagramAnalysis

(Upgradefor DPO71254 - DPO72004orMSO71254 -

MSO72004 models) DSAH Digital Serial Analysis Bundle

(Upgrade for DPO/MSO70404- DPO/MSO70804

models) DSAU MSO Digital Serial AnalysisBundle

(Upgrade for DPO/MSO71254- DPO/MSO72004

models)

DSPT* DVI

EQ* ERRDTH*

DisplayPort Compliance Test Solution

DVI Compliance TestSolution

EqualizationtoupgradefromOptionSLE to Option SLA

Frame and Bit Error Rate Detector (Upgrade for

DPO70404 - DPO70804, DSA70404- DSA70804, or

MSO70404- MSO70804 models)

Option

ERRDTU*

Description

Frame and Bit Error Rate Detector (Upgrade for DPO71254- DPO72004, DSA71254- DSA72004, or

MSO71254- MSO72004 models) ET3 FBD* HT3

EthernetComplianceTestSoftware

FB-DIMM Memory Bus Analysis

HDMI Compliance Test Software HT3DS HDMI Direct Synthesisfor HDMI 1.4

IBA*

InﬁniBand Compliance Modulefor RT-Eye Analysis

Software J2

JA3

TDSDDM2Disk-drive Analysis Software

TDSJIT3 Advanced Jitter andTimingMeasurements

Software M-PHY

PCE* PTD PWR RJUP

M-PHYCompliance TestSolution

MIPI

PCI Express™ Analysis Software

ProtocolDecodingfor8b/10b-encodedSerialSignals

PowerMeasurementand Analysis Software

Upgrade DSA70000 Series withRT-EyeSerialData

Complianceand Analysis Software RTE

RT-EyeSerial Data Compliance and AnalysisSoftware SLA Serial Data LinkAnalysis A dvanced (withEqualization) SLE Serial DataLink AnalysisEssentials (NoEqualization)

SST*

SATA and S AS AnalysisSoftwareModule for RT-Eye

AnalysisSoftware

SVEH* SVEU*

SignalVu™Essentials –Vector Signal Analysis Software

SignalVu™Essentials –Vector Signal Analysis Software SVM GeneralPurpose Modulation Analysis.

RequiresOption SVE SVP Adv

anced Pulsed Signal Analysis including

surements. RequiresOptionSVE

Mea SVT Frequency and PhaseSettlingTime Measurements.

RequiresOpt. SVE USB USB 2.0 Compliance TestSoftware

9, 11

USB3* UWB

USB3.0 Compliance and Analysis Software

Ultra-WidebandSpectralAnalysis

(includesWiMedia Alliance PHY interf. testing)

VNM*

TDSVNMCANand LIN Timing and Protocol Decode

(Triggeringnotincluded)

Other

*7RequiresOpt. RTE.

For models of bandwidth ≥12.5 GHzonly.

Requires DJA.

For models of bandwidth ≥8GHzonly.

Requires Opt. ST6G.

Requires Opt. MTH.

RequiresOpt. ASM and DJA.

Requires Opt. SLE.

Requires. Opt. RTEor DJA.

For modelsof bandwidth ≤8GHzonly.

CAN/LIN trigger moduleavailable –Order ATM1 through Crescent HeartSoftware.

UpgradeInstallation Service

30 www.tektronix.com

Digital and Mixed Signal Oscilloscopes —DPO/DSA/MSO70000Series

Instrument Bandwidth Upgrades

The analog bandwidth oftheDPO/DSA/MSO70000 Series instruments can be easily upgraded afterinitialtime of purchase. Toupgrade your instrument’s bandwidth,order one of theproductslistedbelow.

Current Bandwidth Bandwidth After

Upgrade

DPO70000 and DSA70000 Series

4GHz 6GHz 4GHz 8GHz 4GHz 12.5GHz 4GHz 16GHz 4GHz 20GHz 6GHz 8GHz 6GHz 12.5GHz 6GHz 16GHz 6GHz 20GHz 8GHz 12.5GHz 8GHz 16GHz 8GHz 20GHz

12.5 GHz 16 GHz

12.5 GHz 20 GHz 16 GHz 20 GHz

DPO70000C and DSA70000C Series

12.5 GHz 16 GHz CBWU12T16

12.5 GHz 20 GHz CBWU12T20 16 GHz 20 GHz CBWU16T20

MSO70000 and MSO70000C Series

4GHz 6GHz 4GHz 8GHz 4GHz 12.5GHz 4GHz 16GHz 4GHz 20GHz 6GHz 8GHz 6GHz 12.5GHz 6GHz 16GHz 6GHz 20GHz 8GHz 12.5GHz 8GHz 16GHz 8GHz 20GHz

12.5 GHz 16 GHz

12.5 GHz 20 GHz 16 GHz 20 GHz

Model Num ber

BWU4T6

BWU4T8 BWU4T12 BWU4T16 BWU4T20

BWU6T8 BWU6T12 BWU6T16 BWU6T20 BWU8T12 BWU8T16 BWU8T20

BWU12T16 BWU12T20 BWU16T20

MBWU4T6

MBWU4T8 MBWU4T12 MBWU4T16 MBWU4T20

MBWU6T8 MBWU6T12 MBWU6T16 MBWU6T20 MBWU8T12 MBWU8T16 MBWU8T20

MBWU12T16 MBWU12T20 MBWU16T20

Product(s)are manufactured inISO registered facilities.

Product(s) complies with IEEE Standard 488.1-1987, RS-232-C, and with Tektronix Standard Codes and Formats.

www.tektronix.com 31

Data Sheet

Contact Tektronix:

ASEAN / Australa

Balkans, Israel, South Africa and other ISE Countries +41 52675 3777

Central East Eu

Mexico, Central/South America & Caribbean (52) 56 04 5090

* European toll-freenumber. If not accessible,call: +41 52 6753777

rope, Ukraine, and the Baltics +41 52 675 3777

Central Europe & Greece +41 52 675 3777

Middle E as t,

Asia, and North Africa +41 52 675 3777

The Netherlands 00800 2255 4835*

People’s Rep

Republic of

Russia & CIS +7 (495) 7484900

United K ingdom & Ireland 008002255 4835*

sia (65) 6356 3900

Austria 00800 2255 4835*

Belgium 0080022

Brazil +55(11)37597600

Canada 1800 833 9200

Denmark +4580881401

Finland +41526

France 00800 2255 4835*

Germany 00800 2255 4835*

Hong Kong 400 8

India 000800 650 1835

Italy 00800 2255 4835*

Japan 81 (3) 67

Luxembourg +41526753777

ublic of China 400 820 5835

Poland +41 52 675 3777

Korea 001 800 8255 2835

South Africa +41526753777

Spain 00800

Sweden 00800 2255 4835*

Switzerland 00800 2255 4835*

Tai wa n 886 (

55 4835*

75 3777

20 5835

14 3010

Norway 80016098

Portugal 8008 12370

2255 4835*

2) 2722 9622

USA 1 800 833 9200

Updated 25 May 2010

www.tektronix.com

For Further Information. Tektronix maintains a comprehensive, constantly expanding collection of application notes, technical briefs and other resources to help engineers working on the cutting edge of technology. Please visit www.tektronix.com

Copyrigh

d pending. Information in this publication supersedes that in all previously published material.

issued an

tion and price change privileges reserved. TEKTRONIX and TEK are registered trademarks of

Speciﬁca

x, Inc. All other trade names referenced are the service marks, trademarks, or registered trademarks

Tektroni

espective companies.

of theirr 15Oct 2010 55W-23446-5

Tektronix DSA70404B Data Sheet

Specifications and Main Features

Frequently Asked Questions

User Manual