Tektronix DiiVA Test Adapter Test Fixture Read This First Read This First

Read This First
DiiVA Test Adapter Test Fixture
This document contains information on the DiiVA Test Adapters and Calibration Module for Source and Sink tests. The two test adapter types test DiiVA Interface (DVA) cables and devices against the DiiVA™ PHY Compliance Test Specication.
Wilder part
Tektronix Nomenclature Description
TF -Dii VA-TPA-KIT
TF -DiiVA-T PA -PP
TF-DiiVA-TPA-R DiiVA Receptacle Test Adapter 640-0121-000
TF-DiiVA-TPA-C DiiVA 2X Calibration Module
DiiVA Plug, Receptacle and Calibration Module Test Adapter Kit
Kit contains:
DiiVA Plug Test Adapter Kit (2 Plugs)
(1) TF-DiiVA-TPA-PP (2) TF-DiiVA-TPA-R (1) TF-DiiVA-TPA-C
640-0137-000
640-0124-000
640-0136-000
Guidelines When Making
Connections
Other Information
Align cables carefully
Make preliminary connections lightly
Torque the SMA connector to 3-5 in-lbs using a c alibrated SMA torque wrench
To tighten, turn connector nut only
Do not apply bending force to cable
Do not over-tighten preliminary connections
Do not twist or screw-in cables
Visit the Wilder Technologies Web site (www.wilder-tech.com) for information about the test xtures. The information available includes:
User manual (PDF available for download)
Electrical and mechanical characteristics
Electrical care and handling (www.wilder-tech.com/care-handling.htm)
Electrical characterization plots
For product information, sales, service, and technical support, send an e-mail to Wilder Technologies at support@wilder-tech.com.
www.tektronix.com Copyright © Tektronix
*P071286500*
071-2865-00
For DiiVA application information, refer to http://www2.tek.com/cmswpt/psdetails.lotr?ct=PS&cs=psu&ci=17656&Ic=EN
Loading...