Tektronix CSA8000B, CSA8000, TDS8000, TDS8000B, CSA8200 User manual

...
CD
CSA8000 and TDS8000 Series Instruments Product Software
071-1379-03
www.tektronix.com
Copyright © Tektronix. All rights reserved. Licensed software products are owned by Tektronix or its subsidiaries or suppliers, and are protected by national copyright laws and international treaty provisions.
TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.
Contacting Tektronix
Tektronix, Inc. 14200 SW Karl Braun Drive P.O. Box 500 Beaverton, OR 97077 USA
For product information, sales, service, and technical support:
H In North America, call 1-800-833-9200.
H Worldwide, visit www.tektronix.com to find contacts in your area.
Product Software CD Version 2.5
(CSA8000 and TDS8000 Series Instruments)
This CD contains the files needed to install, reinstall, or upgrade your instrument’s product software, application software, and online help files. Product Software Version 2.x (and above) is designed to be installed on instruments running the Microsoft Windows 2000 operating system.
NOTE. You can perform the installation procedures using either the
touchscreen or a mouse.
NOTE. If you are using this CD to update your current installation of
software and applications, verify that your current installation is older than the version contained on this CD. To determine the current version of product software on your instrument, select About in the Help menu.
Software Installation
NOTE. If you are upgrading the product software from version 1.X, you
must first upgrade your instrument to the Windows 2000 operating system. Contact Tektronix or visit the Tektr onix Web site for instrument upgrade information.
Tektr onix provides new software releases for the CSA8000 and TDS8000 instruments on a frequent basis. Visit the Tektronix W eb site to check for newer software releases before installing the included software.
1
Loading...
+ 6 hidden pages