Tektronix CAB-307 User manual

Models CAB-307/CAB-308

Packing List

Introduction

This document contains information necessary to successfully install your hardware.

WARNING

The CAB-307 and CAB-308 are not intended for use in circuits carrying voltages in excess of 30V RMS,

42.4V peak, or 60V DC. Refer to the manuals of the products being connected for additional limits.

Description

The CAB-307 is a straight-through, shielded, 50-pin cable set for interconnecting low-voltage data aquisition products.

CAB-307 is for use with the following Keithley models:

• KPCI-3110 and KPCI-3116

• STP-3110 (J1 connection)

The CAB-308 is a straight-through, shielded, 68-pin cable set for interconnecting low-voltage data aquisition products.

CAB-308 is for use with the following Keithley models:

• KPCI-3110 and KPCI-3116

• STP-3110 (J2 connection)

PA-691 Rev. A / 11-99