Tektronix CA-562 User manual

Model CA-562

PA-1047 Rev. A / December 2011 1

Model number

Color

CA-562-0

Black

CA-562-2

Red

Keithley Instruments, Inc. Safety Banana-Plug Jumper Cable

28775 Aurora Road
Cleveland, Ohio 44139
1-888-KEITHLEY

http://www.keithley.com

Description

The Model CA-562 is a 10-in. (25.4 cm) jumper cable that has a 0.24 in. (6 mm) banana plug connector on one end
and a 0.16 in. (4 mm) banana plug connector on the other end.

Figure 1: Model CA-562-2

This cable can be used for high-current testing with the Model 8010 High Power Device Test Fixture. It connects
the Model 2651A High Power System SourceMeterInstrument force signal paths in the test fixture to the device
test board.

The cable is available in two different colors (see table below).

Electrical characteristics

 Working voltage, hand-held: 30 V AC and 60 V DC maximum
 Working voltage, hands-free: 5000 V DC
 Current (continuous): 15 A DC maximum
 Current (pulse): 100 A for 1 ms maximum at 1 percent duty cycle maximum