Tektronix AWG710B Option11 Removable Hard Disk User guide

AWG710B Option11
Removable Hard Disk
User guide

071-1545-00

*P071154500*

071154500

Copyright Notices

Copyright © Tektronix, Inc. All rights reserved.

Product Overview

This option exchanges a standard internal hard disk for a
removable hard disk. Using this option improves the
portability, handling and security of data.

Preparation for Use

 Power of f the AWG710B when you remo ve or insert

a disk cartridge.

 The AWG710B does not start up without a disk

cartridge.

 Use only the disk cartridge and drive specified for

this product.

NOTE. Refer to the AWG710B Arbitrary Waveform

Generator User manual for more information on the
AWG710B.

Safety Summary

Only qualified personnel should perform service procedures.

To Avoid Fire or Personal Injury

Do Not Operate Without Covers.

Do not operate this product with covers or panels removed.

Avoid Exposed Circuitry.

Do not touch exposed connections and components when
power is present.

Do Not Operate With Suspected Failures.

If you suspect there is damage to this product, have it inspected
by qualified service personnel.

Do Not Operate In Wet/Damp Conditions.

Do Not Operate In An Explosive Atmosphere.

Keep Product Surfaces Clean and Dry.

Provide Proper Ventilation.

Refer to the manual’s installation instructions for details on
installing the product so it has proper ventilation.

Description of Operation

CAUTION. Be fore you remove or insert a disk

cartridge, make sure that the instrument is
powered off.

Remove a removable hard disk assembly

1. T o release a remov able hard disk assembly , push the

release button then pull and extend the eject knobs to
the outside.

2. Holding the eject knobs, pull out a removable hard

disk assembly calmly.

Insert a removable hard disk assembly

1. Check that the eject knobs are released.

2. Insert a removable hard disk assembly firmly

according to the guide of a removable hard disk
assembly bay.

AWG710B Opt11 Removable hard disk drive User Guide 1

3. Push the eject knobs to lock a removable hard disk

assembly.

Storage a removable hard disk assembly

A hard disk drive is extremely susceptible to
static-discharge damage, shock, dust and so on. When
you keep a removable hard disk assembly simple
substance, please put it into an anti-static plastic bag to
prevent it from those damages.

Optional Accessory

The following accessory is recommended for and only
for use with the additional removable hard disk
assembly.

Table -1: Optional accessory

WARRANTY SUMMARY

Tektronix warrants that the products that it manufactures and sells
will be free from defects in materials and workmanship for a period
of one (1) year from the date of shipment. If a product proves

defective within the respective period, Tektronix will provide repair
or replacement as described in the complete warranty statement.

To arrange for service or obtain a copy of the complete warranty
statement, please contact your nearest Tektronix sales and service
office.

EXCEPT AS PROVIDED IN THIS SUMMARY OR THE
APPLICABLE WARRANTY STATEMENT, TEKTRONIX
MAKES NO WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING WITHOUT LIMITATION THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT
SHALL TEKTRONIX BE LIABLE FOR INDIRECT , SPECIAL
OR CONSEQUENTIAL DAMAGES.

Accessory Part number

Removable Hard Disk Assembly for Spare Hard

650-4644-00

Disks. Pre-Formatted for AWG710B

Specifications

All the electrical and environmental specifications
except mechanical specifications meet those of standard
AWG710B. The following table lists the mechanical
characteristics.

Table -2: Mechanical

Characteristics Description

Net weight
(without package)

Dimensions
(without package)

16.1 kg (35.7 lb.)

Height 216 mm (8.50 inch)

232 mm (9.13 inch) with Feet

Width 422 mm (16.61 inch)

434 mm (17.09 inch) with Handle

Length 470 mm (18.50 inch)

508 mm (20.00 inch) with Rear Feet

(8.50 inch)

232 mm

(9.13 inch)

216 mm

412 mm

(16.22 inch)

422 mm
(16.61 inch)

434 mm
(17.09 inch)

38 mm

(1.50 inch)

320 mm
(12.60 inch)

470 mm
(18.50 inch)

508 mm
(20.00 inch)

44mm
(1.73 inch)

2 AWG710B Opt11 Removable hard disk drive User Guide