Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication
supercedes that in all previously published material. Specifications and price change privileges reserved.
TEKTRONIX and TEK are registered trademarks of T ektronix, Inc.
Contacting Tektronix
Tektronix, Inc.
14200 SW Karl Braun Drive or P.O. Box 500
Beaverton, OR 97077 USA
For product information, sales, service, and technical support:
In North America, call 1-800-833-9200
Worldwide, visit www.tektronix.com to find contacts in your area.
Kit Description
Product
Kit Parts List
This kit provides instructions to install an option on an AWG5000B or
AWG7000B series instrument. Once installed, the upgrade is equivalent to a
factory-installed option.
For a list of available options, see the T ektronix Web site (www .tektronix.com), or
your T ektronix representative.
AWG5000B and AWG7000B series B010100 and above
OptionQuantityPart numberDescription
All1 eachNSLABEL, OPTION INFORMATION
All1 each075-0971-00MANUAL, KIT INSTRUCTIONS
NS – Not Saleable
AWG50BUP & AWG70BUP Upgrades for AWG5000B & AWG7000B Series Instruments1
Installation Instructions
To install your new option(s), you need the key number that is provided with this
kit. This unique key number is valid only for the specific model number and serial
number of your instrument; it will not work on any other instrument. This single
key number enables all valid options for your instrument, those that were factory
installed and any others that you may have already purchased. In other words, this
new key number supercedes any previous key numbers that you may already have.
CAUTION. To avoid losing your options, do not misplace the paper label that is
included with this kit. This label contains the option installation key number and
should be installed on the rear panel of the instrument for future reference.
As a backup, you may want to copy the key number and save it with the other
important papers for your instrument. If you ever need to reenable the option, you
will need to reenter this key number.
Install Option
Follow these steps to enable your new option(s):
1. Power on the instrument.
2. From the menu bar, select the System menu, and then select Option
Installation....
3. The Option Installation dialog box is displayed.
Figure 1: Option Installation dialog box (1)
2AWG50BUP & AWG70BUP Upgrades for AWG5000B & AWG7000B Series Instrumen t s
4. Click Continue to display the second dialog box.
Installation Instructions
Figure 2: Option Installation dialog box (2)
5. Follow the on-screen instructions to enter the alphanumeric key number
exactly as it is printed on the label.
6. Attach the label to the rear panel over the existing label.
AWG50BUP & AWG70BUP Upgrades for AWG5000B & AWG7000B Series Instruments3
Installation Instructions
Verify Option Upgrade
Follow these steps to verify that an option upgrade was successful:
1. Restart the instrument application software.
2. Select the Help menu, and then select About Tektronix AWG....
3. Verify that the option that you installed is in the Options list (see Figure 3).
The example in Figure 3 shows that option 01 is installed:
Figure 3: About Tektronix AWG
❖ End of document ❖
4AWG50BUP & AWG70BUP Upgrades for AWG5000B & AWG7000B Series Instrumen t s
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.