xx
AWG52UP
Option SSD
ZZZ
AWG5200 Series Upgrades
Instructions
www.tek.com
P075109600*
*
075-1096-00
Copyright © Tektronix. All rights reserved. Licensed software products are owned by Tektronix or its subsidiaries
or suppliers, and are protected by national copyright laws and international treaty provisions.
Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication
supersedes that in all previously published material. Specifications and price change privileges r eserved.
TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.
Contacting Tektronix
Tektronix, Inc.
14150 SW Karl Braun Drive
P.O . Bo x 5 0 0
Beaverto
USA
For product information, sales, service, and technical support:
n, OR 97077
In North America, call 1-800-833-9200.
Worldwide, visit www.tek.com to find contacts in your area.
Service safety summary
Only qualified personnel should perform service procedures. Read this Service
safety summary before performing any service procedures.
Do not service alone. Do not perform internal service or adjustments of this
product unless another person capable of rendering first aid and resuscitation is
present.
Disconnect power. To avoid electric shock, switch off the instrument power, then
disconnec
Use care when servicing with power on. Dangerous voltages or currents may exist
in this product. Disconnect power, remove battery (if applicable), and disconnect
test leads before removing protective panels, soldering, or replacing components.
To avoid electric shock, do not touch exposed connections.
t the power cord from the mains power.
AWG5200 Series Upgrades 1
Service safety summary
2 AWG5200 Series Upgrades
Upgrade kit overview
This document provides instructions for to install the solid state drive on the
following Tektronix products:
AWG5202 Arbitrary Waveform Generators
AWG5204 Arbitrary Waveform Generators
Kit parts lists
AWG52UP SSD
AWG52 0 8 Arb
itrary Waveform Generators
For a list of available options, see the Tektronix website (www.tektronix.com) or
your Tektr
This upgr
onix representative.
ade provides a preprogrammed solid state drive to use as either a
secondary hard drive or as a replacement for a failed hard drive.
The kit c
Tektronix part
number Qty. Descri
211-1081-XX
335-3376-XX
850-0358-XX
407-5883-XX
40
ontains the following items:
1
1
1
1
7-5884-XX
1
ption
4
SCREW, MACHINE; M3 X 0.5 X 3.5MM, FLAT WAFER HD
RATIONS STRESS RELIEVED, PHL, ZINC PLATED
W/SER
STEEL
1
1
1
1
ER, IDENT; HD A DAP TER (SLED); SAFETY
MARK
CONTROLLED
DRIVE, PROGRAMMED; SOLID STATE DRIVE
HARD
PROGRAMMED W/ OS & APP SW
Contains the Windows 7 Operating S ystem and the most
rent instrument application software.
cur
BRACKET, HARD DRIVE, FRONT COVER
BRACKET, HARD DRIVE, SLED
075-1096-XX 1
1
The hard drive and the mechanical sled components are pre-assembled.
ANUAL, KIT INSTRUCTIONS
M
AWG5200 Series Upgrades 3
Upgrade kit installation
Upgrade kit installation
Refer to the one (or more) of the following installation sections pertaining to the
upgrade(s) you are installing.
Minimum tool and equipment list
No special tools are required to install any of the upgrade kits covered by these
installation instructions.
AWG52UP SSD installation
NOTE. Before installing the new hard drive, use an external backup device to
back up any files on your instrument for use on the new hard drive.
Install the hard drive using the following procedure:
1. Power off the instrument.
2. Loosen the thumb screws and remove the existing hard drive.
NOTE. The hard drive and hard drive sled components are pre-assembled.
3. Install the new hard drive, and then tighten the thumb screws to secure the
drive in the instrument.
4. Power on the instrument to verify operation.
4 AWG5200 Series Upgrades
Verify instrument software version
Verify instru
ment software version
Tektronix re
your instrument.
1. Select Util
Software Version number.
2. Use your We
3. Search for your instrument’s model number and follow the link to the software.
4. If the installed software is older than that available, download the software.
5. Follow the instructions on the Web page to install the software.
commends to update to the latest available application software for
ities > About my AWG. Under System Information, note the
b browser to go to: www.tektronix.com/software.
AWG5200 Series Upgrades 5
Loading...